JONATHAN Y JYL6015 Manual de usuario

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER

BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS

DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe

the surface of the fixture.

To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the

fuse at the fuse box. Next, use a dry or slighly damperned clean clorth (use clean water, never a solvent) to wipe the

interior surface of the fixture.

Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

Model#: JYL6015

Product Dimensions: 22"LX4.25"W X6.5"H

Note: 2 Assembly Options

Option 1：Portable lamp with plug

Option 2：Hard wired

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item.

* This item should be assembled on a soft surface to prevent scratching the finish during assembly.

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use

and installation.

* The external flexible cable or cord of this lamp cannot be replaced. If the cord is damaged, the lamp shall be destroyed.

Part List and Hardware List

1/3

Option 1: Portable lamp with plug

Step 1

Ste

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents

list and

hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 20 minutes.

1. Three tubes (J) were locked on the NIPPLE of IAMP BODY (F) from the bottom.

2. Place the MOUNTING PLATE(B) on the wall and mark the wall according to the MOUNTING hole and place

2 PLASTIC ANCHORS(C) on the wall.

ENJOY YOUR LAMP

3. Use 2PCS TAPPING SCREW (C) to mount the MOUNTING PLATE (B) on PLASTIC ANCHORS (A).

Attach the IAMP BODY (F) to the MOUNTING PLATE (B) and secure it with the MOUNTING SCREW (E).

1. Place the shade (G) on the lamp body (F), and then lock the shade (G) with the socket ring (H) .

2. Lock the bulb (I) to the socket .

3.Move handle to adjust the direction of lamp shade (G).

PLEASE USE TYPE"A" BULB MAX 25-WATT OR LED BULB MAX 5-WATT, THERE IS 1PC LED

4-WATT BULB IN THE BOX.

ABCD

2/3

Step 1

1.Cut off the plug with scissors, leaving the exposed wire 8" in length.

Step 2

Grounding Instructions:

Ste

PREPARATION

Option 2: Hard wired

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents

list and

hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembl

Time: 20 minutes.

2. Use tools to loosen up the Nipple（J）and Decorative nut（K）from the iamp body.

3. Insert Plastic cover（L）into iamp body hole.

1. Lock the mounting plate (B) on the outlet box with the Out let box screws (C).

2.Connect the power cord of the lamp to the positive and negative poles in the household power box.

Connect, Neutral, White Outlet Supply Wire to:

Black White

* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)

Note: Cuting the cord so that they are at least 6 inches

(152.4mm) long within an outlet box and extend max. 2.4m long

measured from the point where the cord emerges from the

body of the lamp.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green

grounding screw on mounting bracket. Tighten ground screw.

3. Connect the lamp body (F) to the mounting plate (B) and lock it with Mounting screw (E) .

1. Place the shade (G) on the lamp body (F), and then lock the shade (G) with the socket ring (H) .

2. Lock the bulb (I) to the socket .

3. Move handle to adjust shade (G) direction left and right.

Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)

Insulated Wire (not green) with copper metal conductor Insulated Wire (not green) with Silver metal conductor.

*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and

ridged and the hot wire will be round in shape and smooth.（See Illustration on left.）

a) For installation in the United States: Wrap ground wire from outlet box around green ground

screw(C) on mounting bracket, no less than 2" from wire end. Tighten ground screw. If fixture is

supplied with a ground wire, connect to outlet ground wire with a wire connector.

Connect, Hot, Black or Red Outlet Supply Wire to:

Step

1



ABC

3/3

Tabla de contenidos

Otros manuales de Iluminación del hogar de JONATHAN Y

JONATHAN Y

JONATHAN Y JYL6305A Manual de usuario

JONATHAN Y

JONATHAN Y JYL5051A Manual de usuario

JONATHAN Y

JONATHAN Y JYL4002A Manual de usuario

JONATHAN Y

JONATHAN Y JYL4028A Manual de usuario

JONATHAN Y

JONATHAN Y Evelyn JYL2030A Manual de usuario

JONATHAN Y

JONATHAN Y JYL5038A Manual de usuario

JONATHAN Y

JONATHAN Y JYL1004A Manual de usuario

JONATHAN Y

JONATHAN Y JYL1125-SET2 Manual de usuario

JONATHAN Y

JONATHAN Y JYL5015A Manual de usuario

JONATHAN Y

JONATHAN Y Grace JYL7581A Manual de usuario

JONATHAN Y

JONATHAN Y Stockholm Manual de usuario

JONATHAN Y

JONATHAN Y JYL3089 Manual de usuario

JONATHAN Y

JONATHAN Y JYL5010A Manual de usuario

JONATHAN Y

JONATHAN Y JYL2045A Manual de usuario

JONATHAN Y

JONATHAN Y JYL1037A Manual de usuario

JONATHAN Y

JONATHAN Y Oscar JYL1108A Manual de usuario

JONATHAN Y

JONATHAN Y LENIS TBL4379A Manual de usuario

JONATHAN Y

JONATHAN Y JYL8020A Manual de usuario

JONATHAN Y

JONATHAN Y JYL4024 Manual de usuario

JONATHAN Y

JONATHAN Y JYL3070 Manual de usuario

JONATHAN Y

JONATHAN Y Jayne JYL7545A Manual de usuario

JONATHAN Y

JONATHAN Y JYL2043A Manual de usuario

JONATHAN Y

JONATHAN Y JYL8019 Manual de usuario

JONATHAN Y

JONATHAN Y JYL1077A Manual de usuario

Manuales populares de Iluminación del hogar de otras marcas

Philips

Philips Ledino 31606/11/16 Manual de usuario

Salus

Salus UG600 Manual de usuario

Safavieh Lighting

Safavieh Lighting CANDRI TBL4427A Manual de usuario

Hunter

Hunter Bullet Spotlight Kit Manual de instrucciones

Philips

Philips Ledino 16811/87/16 Manual de usuario

Philips

Philips 405441213 Manual de usuario

Philips

Philips Halogen Light Manual de usuario

Pentair

Pentair GLOBRITE Manual de usuario

Philips

Philips 55592-30-16 Manual de usuario

Livoo

Livoo Night light Manual de usuario

Schwaiger

Schwaiger NFL45 Manual de usuario

FRITZ HANSEN

FRITZ HANSEN AQ01 PLUG-IN Manual de usuario

MOOD

MOOD CORSIN JY-16 Manual de usuario

Safavieh Lighting

Safavieh Lighting KREMP TBL4409A Manual de usuario

XTRASUN

XTRASUN XTDEOKT1 Manual de usuario

Inspire

Inspire Lana YF3306-M Manual de mantenimiento

Triarch

Triarch Indoor Lighting 31550/1 Manual de usuario

Malmbergs

Malmbergs Milos Manual de usuario