Johansson ProStreamer Series Manual de usuario
ProStreamer
5202 /5203
5210 /5211
5230
user
manual
2
No part of this manual may be copied, reproduced, transmitted, transcribed or translated into any
language without permission.
Unitron reserves the right to change the specifications of the hardware and software described in
these manuals at any time.
Unitron can not be held liable for any damages resulting from the use of this product.
Specifications are subject to change without notice. 09/11
© Unitron - Frankrijklaan 27 - B-8970 Poperinge - Belgium
T+32 57 33 33 63 F+32 57 33 45 24
email [email protected]
www.johansson.be - www.unitrongroup.com
3
CONTENTS
1 INTRODUCTION
the ProStreamer range ........................................................................................................... 4
package contents .................................................................................................................... 5
safety instructions ................................................................................................................... 6
accessories .............................................................................................................................. 8
2 INSTALLATION OF THE HARDWARE
19” rack mounting.................................................................................................................... 9
wall mounting ......................................................................................................................... 10
inserting CAM slot ................................................................................................................. 11
module overview.................................................................................................................... 12
3 WEBGUI
setting the name of the device ............................................................................................ 14
logging into the device.......................................................................................................... 15
general configuration............................................................................................................ 16
global................................................................................................................................... 16
export configuration ......................................................................................................... 16
factory reset....................................................................................................................... 17
firmware upgrade.............................................................................................................. 17
configuration of the input ..................................................................................................... 18
DVB-S2 input: 5202/5203................................................................................................... 18
configuration of the output................................................................................................... 21
configuration of the MPEG setting...................................................................................... 25
4 TECHNICAL SPECIFICATIONS
5202/5203 DVB-S2 .................................................................................................................. 26
5210/5211 DVB-T .................................................................................................................... 27
5230 A/V................................................................................................................................... 28
5 CONDITIONS OF WARRANTY........................................................................................ 29
6 UHF FREQUENCY TABLE.................................................................................................. 30
7 POWER CONVERSION TABLE........................................................................................ 31
4
1 INTRODUCTION
THE PROSTREAMER RANGE
DVB-S(2) »REF. 5202, 5203
4 SAT inputs with 4 active loop-through outputs
4 transponders over 4 tuner matrix
up to 16 FTA programs
up to 12 encoded programs: ref. 5203
(with associated multiservice CAM)
A/V encoder »REF. 5230
4 A/V stereo inputs
4 programs
DVB-T »REF. 5210, 5211
1 RF input with active loop-through output
4 multiplexes over 4 tuner matrix
up to 16 FTA programs
up to 12 encoded programs: ref. 5211
(with associated multiservice CAM)
5
PACKAGE CONTENTS
Be sure all items listed below are included:
1ProStreamer module
2CAT6 ethernet cable
4RF bridges (except for 5230)
2DC bridges
4DC blocked 75 Ωloads (5202/5203)
1DC blocked 75 Ωload (5210/5211)
4A/V cables (5230)
6
SAFETY INSTRUCTIONS
Read these instructions carefully before connecting the unit
To prevent fire, short circuit or shock hazard:
Do not expose the unit to rain or moisture.
Install the unit in a dry location without infiltration or condensation of water.
Do not expose it to dripping or splashing.
Do not place objects filled with liquids, such as vases, on the apparatus.
If any liquid should accidentally fall into the cabinet, disconnect the power plug.
To avoid any risk of overheating:
Install the unit in a well aery location and keep a minimum distance of 15 cm
around the apparatus for sufficient ventilation.
Do not place any items such as newspapers, table-cloths, curtains,…
on the unit that might cover the ventilation holes.
The unit must not be exposed to any source of heat (sun, heater,...).
Do not place any naked flame sources, such as lighted candles,
on the apparatus.
Do not install the product in a dusty place.
Use the apparatus only in moderate climats (not in tropical climates).
Respect the minimum and maximum temperature specifications.
7
To avoid any risk of electrical shocks:
Connect apparatus only to socket with protective earth connection.
The mains plug shall remain readily operable.
Pull out power plug to make the different connections of cables.
To avoid electrical shock, do not open the housing of adapter.
Maintenance
Only use a dry soft cloth to clean the cabinet.
Do not use solvent.
For repairing and servicing refer to qualified personnel.
Dispose according your local authority’s recycling processes
8
ACCESSORIES
Power Supply »REF. 5050
operating voltage: 15 V
max. output current: 10 A
can power up to 9 modules
19” sub-rack »REF. 5060
can contain up to 9 modules*
+ power supply
mounting in 19” rack or wall-mountable
(bindings delivered)
delivered with 8 blank plates mounted
* depending on the configuration
Fan Unit »REF. 5062
voltage: 230 VAC
essential for proper functioning
of the system
9
2 INSTALLATION OF THE HARDWARE
Before mounting, install all modules in the sub-rack.
Place the power supply (ref. 5050) in the uppermost left slot of the rack (ref.5060).
19” RACK MOUNTING
For rack mounting, attach the 19” sub-rack and the optional fan-unit in the rack as
indicated by the picture.
119” sub-rack (ref. 5060)
2power supply (ref. 5050)
3RF bridge for signal loop-through
4power bridge for DC power loop-through
5fan unit (ref. 5062)
619” Rack
7mounting screws
7
3
1
2
4
5
6
484 mm (19”)
312 mm
(7 RU)
231 mm
10
WALL MOUNTING
When mounting the headend to a wall, attach the fan-unit to the sub-rack with the
delivered bindings. Attach the mounting brackets on the back of the sub-rack for the
mural mounting.
119” sub-rack (ref. 5060)
2power supply (ref. 5050)
3RF bridge for signal loop-through
4power bridge for DC power loop-through
5wall mounting holes
6mounting brackets
7bindings for attaching fan unit to the sub-rack
8fan unit (ref. 5062)
9mounting screws
9
3
1
2
4
5
8
7
6
484 mm
312 mm
(7 RU)
231 mm
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Sintonizador de TV de Johansson
