JK-Products R PRO IR EVIVE Laydown JK 199 Manual de usuario
1030889-00C / us-en / 02.2024
Model-No.: JK 1 /99 RV 0-46
Operating instructions
R PRO IREVIVE Laydown
Contact information
2/66
Contact information
Customer Service JK Products & Services
411 West Washington Avenue
Suite B
Jonesboro, Arkansas 72401
800-445-0624
870-935-9046
http://jkproducts.us/service
Manufacturer JK-Products GmbH
Rottbitzer Str. 69
53604 Bad Honnef
GERMANY
Tel.: +49 (0) 22 24 / 818-140
Fax: +49 (0)22 24 / 818-166
WARNING!
Read these operating instructions.
Failure to observe these instructions:
may result in serious injury and death,
can result in damage to the device and the envi-
ronment.
– For the safety of yourself and others, read and
observe all instructions contained herein before
operating the device.
– Please makethe instructions and additional in-
formation available to anyone who operates or
services the device.
Copyright
The copyright remains with JK-Holding GmbH.
The contents may not be duplicated (in whole or part),distributed or
utilized for competitionpurposeswithout authorization ordisclosed to
other parties.
The right to make technical changes in regard to the figures and infor-
mation contained in this instruction manual is reserved!
Table of Contents
02/2024 1030889-00C Operating instructions – 3/66
1 Table of Contents
2What certain words and signs mean (Glossary).................. 6
2.1 Definitions.................................................................................6
2.2 Warning signs...........................................................................7
2.3 Symbols on thedevice.............................................................8
3What this device is............................................................. 9
3.1 Guidelines..................................................................................9
3.2 Export........................................................................................9
3.3 Scope of delivery ......................................................................9
3.3.1 Options......................................................................................9
3.4 Device description..................................................................10
3.5 Options....................................................................................10
3.6 Function description...............................................................10
3.7 Transport.................................................................................11
3.8 Installation location................................................................11
3.8.1 Ventilation...............................................................................11
3.8.2 Setup location.........................................................................12
3.8.3 Commissioning.......................................................................14
3.9 Signs and stickers on the device...........................................15
3.10 Technical data ........................................................................17
3.10.1 Power rating, electrical specifications and noise level ........17
3.10.2 Dimensions.............................................................................18
3.10.3 Lamp configuration................................................................18
3.10.4 Accent lighting........................................................................18
3.10.5 Spare parts..............................................................................19
4Why you use it ................................................................. 20
4.1 Intended use ...........................................................................20
4.2 Skin condition.........................................................................20
5Who cannot use it............................................................ 21
5.1 Prohibited usage.....................................................................21
5.1.1 REVIVE system .......................................................................21
5.1.2 Vibra Shape (vibration plate) .................................................21
6What you must do to avoid serious harm ......................... 22
6.1 General....................................................................................22
6.2 REVIVE system .......................................................................23
6.3 Sensor .....................................................................................23
Table of Contents
4/66
7What you must do to avoid other harm............................. 24
7.1 General....................................................................................24
7.2 REVIVE system .......................................................................24
7.3 Sensor .....................................................................................24
7.4 Vibra Shape - vibration plate..................................................24
7.5 Foreseeable misuse...............................................................25
7.6 Obligations of the studio operator.........................................25
7.7 Staff training...........................................................................25
8Risks of using this device ................................................ 26
9Benefits of using this device............................................ 27
10 How to decide to use this device...................................... 28
11 What to do before the application .................................... 29
12 How to use this device..................................................... 30
12.1 How to set this device up.......................................................30
12.2 How to make sure the device works .....................................30
12.3 How to use it to treat your condition.....................................30
12.4 How to choose correct application regimen.........................30
12.4.1 Application times....................................................................30
12.5 How to operate the device.....................................................31
12.5.1 Control Center.........................................................................31
12.5.2 User settings overview...........................................................31
12.6 Functions.................................................................................32
12.6.1 Navigation...............................................................................33
12.6.2 Info / Maintenance / Button lock...........................................34
12.6.3 Timer settings / External Timer setting.................................35
12.7 Operating display of the sensor.............................................35
12.8 Selection of the application...................................................35
12.9 Sun Select setting with the outer interface...........................35
12.10 Measurement (automatic mode)...........................................35
12.11 Connections............................................................................36
12.12 How to use..............................................................................36
12.12.1 How to start ............................................................................36
12.12.2 Application tips.......................................................................37
12.12.3 How to stop.............................................................................37
12.13 What to do after the application............................................38
12.13.1 Cleaning and disinfection.......................................................38
12.14 Safety instructions for cleaning/
disinfection and maintenance ...............................................39
12.15 How to clean/disinfect...........................................................41
12.15.1 Cleaning and disinfection of surfaces...................................42
12.15.2 Cleaning/disinfectionplan.....................................................43
12.16 How to maintain......................................................................44
12.16.1 Technical modifications.........................................................44
12.16.2 Maintenance schedule for wear parts...................................44
Table of Contents
02/2024 1030889-00C Operating instructions – 5/66
12.16.3 Cleaning and maintenancework preparation.......................46
12.16.4 Instructions for replacing the lamps .....................................46
12.16.5 Cleaning and disinfection of the sensor................................47
12.16.6 Disassembly for maintenance and cleaning work................47
12.16.7 Removing the canopy panel...................................................48
12.16.8 Removing the acrylic panel....................................................49
12.16.9 Changing the AROMA card ....................................................51
12.16.10 Cleaning the ventilation slot...................................................51
12.16.11 Cleaning or replacing
lamps and filter panels in the canopy....................................51
12.16.12 Cleaning or replacing
the lamps and filter panels in the shoulder tanner...............51
12.16.13 Cleaning or replacing Ambient Light.....................................51
12.16.14 Cleaning or replacing the canopy accent lighting.................51
12.16.15 Cleaning or replacing the frontpanel accent lighting...........52
12.16.16 Cleaning the filters..................................................................52
12.16.17 Cleaning the filter mats..........................................................52
12.16.18 Cleaning the filter mats in shoulder tanner...........................52
12.16.19 Air conditioning:
Empty the condensation tank and clean the filter................52
12.16.20 AQUA / AROMA SYSTEM maintenance................................52
12.17 How to store the device.........................................................53
12.17.1 Decommissioning...................................................................53
12.17.2 Storage....................................................................................53
12.17.3 Disposal...................................................................................53
13 What to do when things go wrong.................................... 54
13.1 Troubleshooting......................................................................55
14 Where you can find out more........................................... 56
15 How we studied this device.............................................. 57
16 Appendix ......................................................................... 58
17 JK-Products, Inc. – Limited Warranty .............................. 59
17.1 Limited Acrylic Warranty........................................................60
17.2 Warranty Claims .....................................................................61
17.2.1 Policy & Procedures................................................................61
17.2.2 Labor Warranty Claim/Credit Procedures.............................62
17.2.3 Quality inspection and acceptance form..............................62
17.3 Limited Lifetime Warranty......................................................63
18 Index................................................................................ 64
What certainwords and signs mean (Glossary)
6/66
2 What certain words and signs mean (Glossary)
2.1 Definitions
Studio operator
People who provide devices to users on a commercialbasis. The stu-
dio operator is trained to operate and maintain the deviceand is re-
sponsible for the orderly operation of the device as well as compli-
ance with the maintenance intervals.
User
A person who uses the device at a commerciallocation.
Staff
People who are responsible for the operation, cleaning/disinfection as
well as general maintenance work andwho instruct theusers in the
operation of the devices.
JK Factory Certified Technician
Level 1
Authorized toperform general maintenancesuch as replacing lamps,
aqua mist, and fragrance containers as well as overall cleaning of the
unit.
Level 2
Authorized toperform maintenance and repairssuch as replacement
of ballast,framed acrylic, electronic circuit boards, and otherelectrical
components.
Level 3
Authorized and trained to utilize JK Productsproprietary diagnostic
software to adjust operating parameters and perform detailed diag-
nostics.
Level 4
This individualis uniquely qualified to assess the condition of a unit
and make a determination if the device meets the requirements for
continued use ten (10) years from thedate ofmanufacture.
NOTE:
Each technician level is authorized to perform the
tasks of technician levels smaller in number to
theirs. E.g. a level 3 technician is authorized to per-
form the tasks assigned to a level 1 and 2 techni-
cian.
What certainwords and signs mean (Glossary)
02/2024 1030889-00C Operating instructions – 7/66
2.2 Warning signs
Danger notices, nonobservance will lead to death or serious injury:
DANGER!
Type and source of danger, e.g. 'DANGER – High
voltage!'
Description of the consequences, e.g. 'You canbe
killed or injured by an electric shock!'
Countermeasures:
– Disconnect device from power supply before
opening.
– Do not reach into the inside with thedevice
switched on.
Warning notices, nonobservance can lead to death or serious injury.
WARNING!
Type and source of danger, e.g. 'WARNING – hot
surface!'
Description of the consequences, e.g. 'You canburn
your hand (skin, face)!'
Countermeasures:
– Do not touch hot parts and nearby surfaces.
– Wait until hot parts and surfaces have cooled
down.
NOTICE
ESD-sensitive components!
The word 'NOTICE' without warning sign points out
that danger for devices, materials and the environ-
ment can be expected here.
Countermeasures:
– Avoid doing this.
Important information:
NOTE:
This symboldoes not identify safety notices, but
states information for a better understanding of the
processes.
What certainwords and signs mean (Glossary)
8/66
2.3 Symbols on the device
The following symbols aredisplayed on the deviceor on the packag-
ing:
Manufacturer, company address
Read the operating instructions!
Where there are great differences in temperaturebetween the
transport route and the installation site the device may not be put
into operation immediately afterbeing set up.
Wait at least 2 hours before connecting the device to the power sup-
ply.
Maximum transport weight
Do not stack!
This side up.
Keep dry.
Temperature limitations.
The temperature limits arenoted nextto the upper andlower hori-
zontal line.
Recyclable material.
Polystyrene
Cardboard
Mixed paper
Steel
Wood
Permitted air pressure during transport and storage.
What this device is
02/2024 1030889-00C Operating instructions – 9/66
3 What this device is
3.1 Guidelines
This product is in conformity with UL STD 482 and fulfils the require-
ments for the exempt group according to IEC 62471.
3.2 Export
This deviceis exclusively intended for use inthe USAand may not be
exported to other countries and operated there! Themanufactureras-
sumes no liability whatsoever in the event of non-compliance. High lia-
bility risksmay occur for the exporter and/or thestudio operator in the
event of noncompliance.
3.3 Scope of delivery
REVIVE device
AROMA card
Protective goggles
Allen-key
Technical documentation
3.3.1 Options
Not applicable for this device.
What this device is
10/66
3.4 Device description
1. INTERIOR DISPLAY
2. Red Light & Near InfraredLEDs, canopy
3. Handle, canopy
4. Red Light & Near InfraredLEDs, base
5. Body cooling with AROMA
3.5 Options
Not applicable for this device.
3.6 Function description
See page 31 for information on control and operation of the device
and its features.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cama de bronceado de JK-Products
