Jiajia AUDI Q8 Hoja de datos
BATTERY OPERATED RIDE-ON
Owner’s Manual
with Assembly Instructions
Styles and colo(u)rs may vary.
Made in China.
The owner’s manual contains important safety information as well as assembly, use and
maintenance instructions.
The Ride-on Car must be assembled by an adult who has read and understands the
instructions in this manual.
Keep the package away from children and dispose of properly before use.
Keep this manual for future reference.
AUDI Q8
Battery
Charger
6V7AH*1 or 6V10AH *1
6V1000mA
12V4AH *1
12V500mA
Suitable age:
Load Capacity:
Speed:
Size of car:
Power way:
Charge time:
37-96 months
Under 30kg
3km/h 3-5km/h
108.5 x 63 x 51.5 CM
Charging type
8-12 hours
About Your New Ride-On │ 1
VER: SMS-JE2066-EN-191010
SPECIFICATIONS:
1WD 2WD 4WD
On the purchase of your new Ride-On.
This ride-on will provide your child with many miles of riding of enjoyment.
To help assure you and your rider a safe ride we ask you to please read this
manual carefully, and keep it for future reference.
Follow the recommendations in this manual, they are designed to improve
the safety and operation of your ride-on car and it’s rider.
Audi Q8 Electric Ride-on manufactured by Zhejiang Jiajia Ride-on
Co.,Ltd. (Address: Xincang Industrial Zone, Xincang Town, Pinghu
City, Zhejiang Province, China). Trademarks, design patents and
copyrights are used with the approval of owner AUDI AG.
The following safety hazards may result in serious injury or death:
• Never leave child unattended. Direct adult supervision is required. Always
keep child in view when child is in vehicle.
• Never use in roadways, near streets, motor vehicles, steps, bodies of water,
sloped surfaces, hills, wet areas, flammable vapors, in alleys, at night, or in
the dark.
• Never use in unsafe conditions such as snow, rain, loose dirt, mud, sand, or
gravel, otherwise may result in an unexpected accident such as tipping over,
and could damage the electrical system or battery
• Not to be used in traffic.
• This toy should be used with caution since skill is required to avoid falls or
collisions causing injury to the user or third parties.
• This toy is unsuitable for children under 36 months due to its maximum
speed; Maximum user weight is 30kg.
• This toy has no brake.
User Notice │ 2
WARNING!
SAFETY
● Non-rechargeable batteries are not to be recharged.
● Rechargeable batteries are to be removed from the toy before being charged.
● Rechargeable batteries are only to be charged under adult supervision.
● Different types of batteries or new and used batteries are not to be mixed.
● Batteries are to be inserted with the correct polarity.
● Exhausted batteries are to be removed from the toy.
● The supply terminals are not to be short-circuited.
BATTERY INFORMATION
• CHOKING HAZARD - Small parts. Not suitable for children under 36 months.
The product contains small parts, keep children away when assembling.
• ADULT ASSEMBLY REQUIRED.
• Always remove protective material and poly bags and dispose before
assembly.
• Protective equipment should be worn. Always wear shoes and sit in the seat
when operating the vehicle.
• Only drive on level ground. Never use on the lawn.
• Never leave a child unattended.
• Keep your hands, hair, and clothes away from moving parts.
1
8
910
11
12
13
2
3
4
5
5
5
6
6
7
7
HINT: Some parts shown are assembled on both sides of vehicle
Parts Diagram │ 3
14
15
16
18
17
PART
NO.
REMARKS
PART NAME
Q’ty (pcs)
Vehicle body
Rear gear box
Rear wheel
Front wheel
Ø10 washer
Lock nut
Hubcap
View mirror
Steering wheel
M5x40 machine screw
Ø5 nut
Seat
M5x16 screw
Motor Hood
Ø4x12 screw
Charger
Spanner
Remote controller
Placed on the steering wheel
Placed on the steering wheel
Left and right
Parts List │ 4
1WD 2WD
2WD 1 PC labeled “R”, the other one labeled “L”
Assembly tools required (not included):
Screwdriver
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
1
2
2
7
4
4
2
1
1
1
1
2
1
4
1
1
1
1
2
2
2
6
4
4
2
1
1
1
1
2
2
8
1
1
1
2
3
4
5
7
10
89
6
1
Attach the Rear Wheels │ 5
Rear Bottom View
Remove all the parts from the rear axle.
1. Slide the rear gear box onto the rear axle from Left Side (“R” labeled gear box should
be fit to the “R” side, “L” labeled gear box should be fit to the “L” side), keep the
connector and the motor on the gear box pass through the larger hole and out where
the battery sits.
2. Slide the rear wheel onto the rear axle. Keep it match up with the gear box.
3. Slide a Ø10 washer onto the rear axle.
4. Tighten a lock nut to the end of the rear axle with a spanner.
5. Fit the hubcaps to the wheel.
1WD
HINT: If your vehicle is Two / Four Wheels Driving Type, see the next page please.
6 Slide the Ø10 washer onto the rear axle (Right Side).
7. Slide the rear wheel onto the rear axle.
8. Slide the Ø10 washer onto the rear axle.
9. Tighten a lock nut to the end of the rear axle with a spanner. HINT: An extra
spanner has been provided to hold the Lock Nut on the other side of the rear
axle while tightening the Lock Nut on the other side.
10. Fit the hubcaps to the wheel.
2
3
4
5
1
Attach the Rear Wheels │ 6
Rear Bottom View
2WD
Remove all the parts from the rear axle.
1. Slide the rear gear box onto the rear axle. “R” labeled gear box should be fit
to the “R” side of vehicle body; “L” labeled gear box should be fit to “L” side of
vehicle body. Keep the motor and the connector on the gear box pass through
the larger hole on the rear of the vehicle and out where the battery sits.
2. Slide the rear wheel onto the rear axle. And keep the driving wheel match up
with the gear box.
3. Slide the Ø10 washer onto the rear axle.
4. Tighten a lock nut to the end of the rear axle with a spanner.
5. Fit the hubcaps to the wheels.
Repeat the above procedure to assemble the other rear wheel.
43
2
1
5
Attach the Front Wheels │ 7
Front Bottom View
Remove all the parts from the front axle.
1. Slide a Ø10 washer onto the front axle.
2. Slide a front wheel onto the front alxe.
3. Slide a Ø10 washer onto the front axle.
4. Tighten a lock nut to the end of the front axle with a spanner.
5. “Snap” the hubcap to the wheel.
Repeat the above procedure to assemble the other normal wheel.
GAP
After assembling any wheel to the axles, please check the
gap between the screw thread and the collapsible (refer to
below picture), if the gap is too big, please add two or three
washers inside the wheel, but after tightening the nut outside
the wheel, please turn the wheel by your finger to check if the
wheel can run smoothly, this is very important, because if the
wheel can run smoothly, it is ok, but if the nut press the wheel
and the wheel can’t run smoothly, the motor will be broken
easily! Then you need to decrease one or two washers to
make sure the wheel can run smoothly!
2
4
1
7
3
5
6
Attach the Steering Wheel │ 8
Remove the M5x40 machine screw and Ø5 nut from the steering wheel.
Turn the vehicle body upright.
5. Place the steering wheel over the the steering column, protruding from the
middle of the steering wheel base.
1. With a screwdriver remove the
screw on the battery cover
located in the center of the
steering wheel.
2. Remove the battery cover from
the top of the battery
compartment.
3. Insert 2x1.5 AA batteries in their
correct polarities.
4. Place the battery cover over the
battery compartment and fasten
with the screw you removed in
step one.
Attach the Steering Wheel
HINT: If the steering wheel of your vehicle equipped with the sound function,
please follow the steps 1-4 to add the batteries (Not Included), and refer to
the battery information on page 2.
6. Align the holes on each side of steering wheel
with the holes at the end of the steering column.
7. Fasten a nut on the opposite end of the
screw to secure the steering wheel
to the steering column.
End of steering column
2
1
Connect the Power Supply │ 9
Fuse
box
1WD
2WD
1. Plug the red fuse connector into the terminal on battery.
2. Plug the vehicle connector into the motor connector on body as
shown above.
1. Plug the red fuse connector into the terminal on battery.
2. Plug the vehicle connector into the motor connector on body as
shown above. Repeat for the other side.
White vehicle
connector
White motor
connector
Red battery
connector
Red vehicle
connector
Rear Top View
battery
Tabla de contenidos
Otros manuales de Coche de juguete motorizado de Jiajia
