JHCTech ALAD-K1220T Manual de usuario
User’s Manual
1
ALAD-K1220T
User’s Manual
User’s Manual
2
Version Note
No.
Ver.
Note
Date
Writer
1
A1.0
First publish
20170504
Eileen Lee
I
Copyright
The documentation and the software included with this product are copy- righted 2016 by Shenzhen JHC
Technology Co., Ltd. All rights are reserved. Shenzhen JHC Technology Co., Ltd. reserves the right to make
improvements in the products described in this manual at any time without notice. No part of this manual
may be reproduced, copied, translated or transmitted in any form or by any means without the prior written
permission of Shenzhen JHC Technology Co., Ltd. Information provided in this manual is intended to be
accurate and reliable. However, Shenzhen JHC Technology Co., Ltd.assumes no responsibility for its use,
nor for any infringements of the rights of third parties, which may result from its use.
Acknowledgements
Award is a trademark of Award Software International, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
All other product names or trademarks are properties of their respective owners.
For more information on this and other JHC products, please visit our websites at:
http://www.jhctech.com.cn
User’s Manual
II
Product Warranty (2 years)
JHC warrants to you, the original purchaser, that each of its products will be free from defects in materials
and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by persons other than
repair personnel authorized by JHC, or which have been subject to misuse, abuse, accident or improper
installation.
JHC assumes no liability under the terms of this warranty as a consequence of such events.
Because of JHC.s high quality-control standards and rigorous testing,most of our customers never need to use
our repair service. If an JHC product is defective, it will be repaired or replaced at no charge during the
warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement
materials, service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU speed, JHC products
used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages
you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual, product, and any helpful
information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise authorization) number
from your dealer. This allows us to process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a
photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.
User’s Manual
A
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications
when shielded cables are used for external wiring. We recommend the use
of shielded cables. This kind of cable is available from JHC. Please
contact your local supplier for ordering information. Test conditions for
passing included the equipment being operated within an industrial enclosure.
In order to protect the product from being damaged by ESD (Electrostatic
Discharge) and EMI leakage, we strongly recommend the use of
CE-compliant industrial enclosure products.
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Technical Support and Assistance
Step 1. Visit the JHC web site at www.jhctech.com.cn where you can find the latest information about the
product.
Step 2. Contact your distributor, sales representative, or JHC’s customer service center for technical support
if you need additional assistance. Please have the following information ready before you call:
- Product name and serial number
- Description of your peripheral attachments
- Description of your software (operating system, version,application software, etc.)
- A complete description of the problem
- The exact wording of any error messages
User’s Manual
B
Contents
General Information............................................................................................................................................ 1
1.1 Introduction........................................................................................................................................... 2
1.2 Features.................................................................................................................................................2
1.3 Specifications........................................................................................................................................ 2
1.3.1 General....................................................................................................................................... 2
1.3.2 Display and Touch ..................................................................................................................... 3
1.3.3 Ethernet......................................................................................................................................4
1.3.4 Audio (Optional)........................................................................................................................ 4
1.3.5 Power Consumption................................................................................................................... 4
1.4 Environmental Specifications...............................................................................................................4
1.5 Mechanical Specifications....................................................................................................................5
Hardware Installation.......................................................................................................................................... 6
2.1 Introduction........................................................................................................................................... 7
2.2 Jumpers and connectors........................................................................................................................7
2.2.1 Setting Jumpers.......................................................................................................................... 8
2.3 Jumper Location ................................................................................................................................... 9
2.3.1 JP1/JP2:COM3/COM4 RS232 Power Select ..........................................................................10
2.3.2 JP3: Power-on Select............................................................................................................... 10
2.3.3 JP4: Clear COMS Data............................................................................................................ 11
2.3.5 JP7:LCD Back light Power Select...........................................................................................13
2.3.6 JP8:M.2 Signal Select..............................................................................................................13
2.4 I/O indication......................................................................................................................................14
2.4.1 Ethernet Connector (LAN)......................................................................................................14
2.4.2 Power Input Connector (DC-IN).............................................................................................15
2.4.3 Power SW button Connector ...................................................................................................15
2.4.4 USB Connector........................................................................................................................16
2.4.5 COM1/2 Connector .................................................................................................................17
2.4.6 COM3/4 Connector .................................................................................................................18
2.4.7 SATA0 (Serial ATA) Connector.......................................................................................................18
2.4.8 SATA(Serial ATA) Power Connector...............................................................................................19
2.4.9 Digital IO Connector .......................................................................................................................19
2.5 Installation ..........................................................................................................................................20
2.5.1 HDD/SSD Installation.............................................................................................................20
2.5.2 Installing SODIMM module....................................................................................................23
2.5.3 Installing mSATA Flash Card module .....................................................................................27
2.5.4 Installing I/O Cover.................................................................................................................30
2.5.5 Front USB................................................................................................................................32
2.5.6 Panel Mounting........................................................................................................................ 34
BIOS Setup.......................................................................................................................................................36
3.1 Overview............................................................................................................................................. 37
3.2 Default Configuration.........................................................................................................................37
3.3 Entering the BIOS Setup Utility.........................................................................................................37
3.4 Legends...............................................................................................................................................38
3.5 Scroll Bar............................................................................................................................................38
3.6 Sub menu............................................................................................................................................38
User’s Manual
C
3.7 Getting Help........................................................................................................................................ 38
Insyde BIOS Setup Utility........................................................................................................................38
System Date..............................................................................................................................................39
System Time.............................................................................................................................................39
3.9.1 ACPI Settings ..................................................................................................................................40
3.9.2 CPU Configuration..........................................................................................................................41
Driver Installation.............................................................................................................................................58
4.2 Installation: .........................................................................................................................................59
SYSTEM RESOURCE..................................................................................................................................... 63
5.1 WDT Function....................................................................................................................................64
User’s Manual
1
General Information
CHAPTER
1
User’s Manual
2
1.1 Introduction
ALAD-K1220T series are a intelligent, fanless embedded panel, powered by Intel®Skylake-U Celeron or
Core I3/I5/I7 CPU.
This product offers multiple I/O interface, there are 1*HDMI interface, 2*Giga Lan ports, 4*USB3.0 ports,
2*COM ports, 1*Mini PCIe socket is PCIex1 and USB signal and 1*M.2 socket.
ALAD-K1220T series support 12.1 inch 1024*768@60Hz TFT LCD, with 5-wire resistive or projected
capacitive touch screen, 1*2.5 inch SATA HDD driver bay and 1*M.2 for storage, DC 9~36V power input.
1.2 Features
1、Aluminum die-casting chassis, fanless design;
2、12.1'' LED TFT LCD, 5-wire resistive or projected capacitive touch;
3、Intel®Celeron or Skylake-U Core I3/I5/I7 CPU;
4、1*DDR4L 2133 SODIMM, MAX 16GB;
5、1*Mini PCIe(PCIe+USB), 1*M.2 2242 B-Key;
6、2*COM, 2*LAN, 4*USB3.0;
7、1*2.5'' HDD Bay, 1*M.2;
8、DC 9~36V power input;
9、Front ATX power button & rear power SW signal connector;
10、Flat bezel design, IP65 front panel;
11、Easy to assemble and disassemble HDD cover。
1.3 Specifications
1.3.1 General
CPU:
Intel®Skylake-U Core I3-6100U 2.3GHz, 2 cores and 4 threads, TDP 15W(Optional Celeron 3955U and
I5-6300U)
BIOS: SPI 64M bit flash ROM
System Memory:
1*DDR4 2133 SODIMM, MAX 16GB
User’s Manual
3
Watchdog Timer: 255-level interval timer, setup by software
Serial Ports: 2* RS232/422/485, D-sub 9 male
USB: 4* USB 3.0 Type A Port in rear
Expansion Interface:
1* Mini PCIe with PCIeX1\USB2.0 or SATA signal, support wifi and 3G etc. ,jumper to be mSATA
1*PCI/PCIe X4(X1 signal)( Optional)
1* M.2 2242 B-Key（PCIe+USB+SATA）
Storage: 1* 2.5” SATA HDD or SSD, SATA3.0 6Gbps; 1*M.2( SATAor PCIe signal)
1.3.2 Display and Touch
Chipset: Intel®HD Graphics 520
Display Memory: Shared system memory
HDMI Resolution: Up to 3840*2160 @30Hz
LCD：
Type
12.1 inch TFT LED
Resolution
1024*768
Color
16.2M colors
Pixel Pitch(mm)
0.240*0.240
Brightness(cd/㎡)
500
Viewing Angle
80 degree(left), 80 degree(right), 70 degree(up), 70 degree(down)
Operating Temperature
-30℃~70℃
Back light lifetime
50,000 hours
Tabla de contenidos
Otros manuales de Panel táctil de JHCTech
Manuales populares de Panel táctil de otras marcas
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manual de usuario
YASKAWA
YASKAWA TP 610C Manual de usuario
B&R
B&R Power Panel C Series Manual de usuario
Beijer Electronics
Beijer Electronics X2 control Manual de usuario
AXIOMTEK
AXIOMTEK GOT321W-521 Manual de usuario
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manual de usuario
