JX2-PROFI1 1 Safety Instructions
Jetter AG 8
TableofContents
The N-
PID 1
moduleis
in line
with the
current
state of
the art.
This N-
PID 1
module
complies
with the
safety
regulatio
ns and
standard
s in
effect.
Special
emphasis
wasgiven
to the
safety of
the users.
1 Safety Instructions
The JX2-PROFI1 module is in line with the current state of the art. The JX2-PROFI1
module complies with the safety regulations and standards in effect. Special
emphasis was given to the safety of the users.
Of course, the following regulations apply to the user:
•relevant accident prevention regulations;
•accepted safety rules;
•EC guidelines and other country-specific regulations.
Usage as Agreed Upon
Usage as agreed upon includes operation in accordance with the operating
instructions.
The JX2-PROFI1 module is used to control machinery, such as conveyors,
production machines, and handling machines.
The supply voltage of the JX2-PROFI1 module is DC 24 V . This operating voltage
is classified as SELV (Safety Extra Low Voltage). The JX2-PROFI1 module is
therefore not subject to the EU Low Voltage Directive.
The JX2-PROFI1 module may only be operated within the limits of the stated data.
Usage Other Than Agreed Upon
The JX2-PROFI1 module must not be used in technical systems which to a high
degree have to be fail-save, e.g. ropeways and aeroplanes.l
If the JX2-PROFI1 module is to be run under surrounding conditions, which differ
from the conditions mentioned below, the manufacturer is to be contacted
beforehand.
Who is Permitted to Operate the JX2-PROFI1 Module?
Only instructed, trained and authorised persons are permitted to operate the JX2-
PROFI1 module.
Mounting and backfitting may only be carried out by specially trained personnel, as
specific know-how will be required.
Maintaining the JX2-PROFI1 Module
The JX2-PROFI1 module is maintenance-free. Therefore, for the operation of the
module no inspection or maintenance are required.
Decommissioning and Disposal of the JX2-PROFI1
Module
Decommissioning and disposal of the JX2-PROFI1 module are subject to the
environmental legislation of the respective country in effect for the operator's
premises.
