SPEED CONTROL (ALWAYS-ON MODE): Change the speed of your
selected pattern. The status LED on your LED Module will blink
“yellow” twice when reaching maximum or minimum values.
TRIGGER SENSITIVITY (TRIGGERED MODE): Press QUICK to
decrease or SLOW to increase trigger sensitivity. The status LED on
your LED Module will blink “yellow” twice when reaching maximum or
minimum values.
NOTE*** Proper trigger sensitivity is imperative when utilizing multiple drum
lights. This prevents “Crosstalk” - LED Modules picking up the vibrations from
another drum adjacent to the drum the unit is attached to. This is caused from
failure to dial in the sensitivity of the unit, and improper placement of the LED
Module itself.
PRESETS FOR TRIGGERED MODE: Access 2 preset
patterns when utilizing TRIGGERED mode.
FLASH FOR TRIGGERED MODE: Display an always-on glow of your
selected color, which will flash brighter when tapping your drum.
FADE FOR TRIGGERED MODE: Fade-out at the end of the
light flash activated from tapping your drum. Press FADE3
to decrease and FADE7 to increase fade duration. The
status LED on your LED Module will blink “yellow” twice
when reaching maximum or minimum values.
SAVE CURRENT SETTINGS: Press AUTO to save your current
pattern and color settings. The status LED on your LED Module will
blink “yellow” twice verifying your settings being saved. the “save
settings” feature is not available when your Galaxy drum light is in “sleep
mode”.
Galaxy Drum Lights by Jered Systems - Est. 2007 Florida, USA
