Jensen jsbw-650 Manual de usuario
MODEL: JSBW-650
Please read this instruction manual carefully and keep it for future reference.
BLUETOOTH SOUNDBAR SYSTEM
INSTRUCTION MANUAL
3
AC/DC adapter
to the wall outlet having AC 100-240V~, 50/60 Hz.
Insert the small plug from supplied AC/DC adaptor to DC IN jack
on the rear of the unit and insert the AC/DC adaptor
NOTE:This AC/DC adapter is intended to be
correctly operated in a vented indoor wall outlet.
Ventilation
When placing the Sound Bar on an entertainment center, bookshelf, or any type of
enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar
for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat
generated from the Sound Bar could produce a potential heat hazard.
2. Placing on floor in vertical
1. Placing the device on table
Fixing the base with the unit body by supplied screw.
Put the unit on flat surface floor.
AUX-IN 2
VOLUME
TUNE
+
VOLU ME
SOURCE
To the DC IN jack on the rear of unit.
MOUNTING
We recommend having this speaker professionally mounted. By using the included
wall mounting accessories, the sound bar can be mounted onto a wall.
1. Mark the position of the mounting screws on the wall using a pencil.
2. Drill the supplied screws directly into the marks that you have made on the wall
3. Put the sound bar onto the mounting brackets. Make sure they are firm and stable.
1. Mark the position of the mounting screws on the wall using a pencil.
3. Insert the supplied plastic inserts into the holes by hammer.
5. Put the sound bar onto the mounting brackets. Make sure they are firm and stable.
(1) (2)
2.2Mountingonthewoodenwall:
Holes distance:26.9 inches
supplied Metallic Bracket
in same horizontal level
supplied Screws
Holes distance:26.9 inches
supplied Screws
in same horizontal level
supplied Screws
supplied Metallic Bracket
supplied Plastic Inserts
Drill holes by powerful electrical drill. supplied Metallic Bracket
supplied Plastic Inserts
supplied Screws
supplied Metallic Bracket
2. Drill holes by a powerful electric drill( Not supplied )( Drill head diameter:6.0 mm ).
4. Secure the supplied screws into the plastic inserts with the Metallic Bracket.
with the Metallic Bracket as the figure above.
2. Mounting the device on wall
1. Mounting the device on wooden wall
in same horizontal level
4
26.9 inches
5
105.6
Front View
Back View
PRODUCT OVERVIEW
MODE INDICATOR
FM ANT (Antenna) AUX-IN 1 jacks DC IN jack
Side View
AUX-IN 2 Jack POWER/SOURCE
VOLUME UP
VOLUME DOWN
TUNE UP
DC 22V 2.5 A
AUX-IN 1
FM ANT
DC 22V 2.5A
AUX-IN 1
FM ANT
AUX-IN 2
VOLUME
TUNE
+
VOLUME
SOURCE
STANDBY
PAIR
6
BATTERY INSTALLATION
STALLATION
- Before installation
Remove and discard the insulation tab. Out of the box the Remote Control
has a battery and will be usable after the tab is removed.
-Replace battery for the remote control
1. Push and slide out the battery holder as Figure 1 below.
2. Replace the battery with a new CR2025 button cell with the polarity (+)
side upward.
3. Slide into the battery holder.
BATTERY PRECAUSIONS
• Never recharge the batteries, apply heat to them or take them apart.
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
• Do not throw the batteries in fire!
• Attention should be drawn to the environmental aspects of battery disposal.
• If the remote control is not going to be used for a long time, remove the battery
to avoid damage caused by battery leakage corrosion.
POWER CONTROL
- To turn the unit on
• Connect the supplied AC/DC adapter.
• Press STANDBY button to turn on the unit.
- To turn the unit off
• Press STANDBY button on the remote control or hold STANDBY button in
NOTE:
If the unit is not used for a long period of time, disconnect the power adapter.
1
2
3
4
5
6
7
8
10
1. STANDBY
6. /TUNE -
7. ( play/pause )
10. BASS +
4. BASS -
8. (mute)
14. /TUNE +
13. EQ ( Equalizer )
2. VOL- ( volume down )
5. TREBLE -
9. VOL+ ( volume up )
3. SOURCE
12. TREBLE +
REMOTE CONTROL
11. PAIR
9
11
12
13
14
the right side of the unit.
FM RADIO
Power on the unit and press the SOURCE
. Press and hold TUNE+ button at control plate
7
2
-During playback
•Press MUTE button to turn off the sound. Press again to resume the sound.
•Press VOLUME+/- buttons to adjust the volume level.
•Press BASS+/- buttons to adjust bass level.
•Press TREBLE+/-buttons to adjust treble level.
•Press EQ button to switch between POP/JAZZ/CLAS /ROCK/NORM.
button on remote control or the SOURCE
button on control plate until the indicator light turns purple.
NOTE:When power is off,or unplugging the adapter,station need to be re-searched.
1. Press TUNE+ button on control plate to search manually to play the searched station.
. Press and hold
4or
to search station automatically until a
station is found.
3. Press button on control plate to search manually to play the searched
or station.
on remote control to search station automatically until a
station is found.
- RCA AUX IN sources may include
•TV/DVD/VCR
- RCA AUX IN connection
1. Connect the RCA audio cable (supplied) to the audio output jack on DVD
player and AUX 1 or AUX 2 jack on the rear of DVD.
2. Press SOURCE button repeatedly until the indictaor turns green.
-During playback
•Press MUTE button to turn off the sound. Press again to resume the sound.
•Press VOLUME+/- buttons to adjust the volume level.
•Press BASS+/- buttons to adjust bass level.
•Press TREBLE+/-buttons to adjust treble level.
•Press EQ button to switch between POP/JAZZ/CLASSIC/ROCK/NORMAL.
White
Red
8
AUX-IN 1 CONNECTION
DC 22V 2.5A
AUX-IN 1
FM ANT
- AUX IN source may include:
•Personal audio players
•Personal computers or laptops
- AUX IN connection:
1. Connect a stereo 3.5mm jack cable (supplied) between the headphone or
L
2. Power on the unit and press SOURCE button repeatedly un
Set your personal audio player/computer to play.
NOTE: If there is no sound or if the volume is not loud enough, you may
increase the setting on the source.
-During playback
•Press MUTE button to turn off the sound. Press again to resume the sound.
•Press VOLUME+/- buttons to adjust the volume level.
•Press BASS+/- buttons to adjust bass level.
•Press TREBLE+/-buttons to adjust treble level.
•Press EQ button to switch between POP/JAZZ/CLAS/ROCK/NORM.
Connect to the output
socket of external
audio devices (Mp3,
Computer, ext.)
To AUX IN Jac
on the unit
9
AUX-IN 2 CONNECTION
til the indicator
turns orange.
AUX- IN 2
VOLUM E
TUNE
+
VOL UME
SOURCE
INE/Audio output of the personal audio player and the AUX-IN 2 jack on the
side of the unit.
Otros manuales para jsbw-650
1
Tabla de contenidos
Otros manuales de Sistema de altavoces de Jensen
Jensen
Jensen Groove 310 Manual de usuario
Jensen
Jensen SMPS-125 Manual de usuario
Jensen
Jensen EHT-2 Manual de usuario
Jensen
Jensen smps-182 Manual de usuario
Jensen
Jensen 400 Manual de usuario
Jensen
Jensen smps-550 Manual de usuario
Jensen
Jensen Sonix JW250 Manual de usuario
Jensen
Jensen POWERSTATION POWERSTATION Manual de usuario
Manuales populares de Sistema de altavoces de otras marcas
Sondpex
Sondpex Active Speaker System and Digital Music... Manual de usuario
JVC
JVC NX-PN7 Manual de usuario
Marshall Amplification
Marshall Amplification AR-DM61-BT Manual de usuario
Yamaha
Yamaha NX-A01 - Speaker Sys Manual de usuario
SE Audiotechnik
SE Audiotechnik I-LINE Manual de usuario
Gemini
Gemini WRX-843 Series Manual de usuario