Jensen JE17FDTV Manual de usuario
JE17FDTV
Owner's Manual
Audiovox Specialized Applications, LLC
www.asaelectronics.com
2
Important Notice
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for
vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception,
video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when
the vehicle’s parking brake is applied.
An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking
brake is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor
vehicle.
Television Reception
This entertainment system is designed primarily for viewing prerecorded movies or playing video games. Television reception in a moving
vehicle will be limited and in some areas will not be possible due to weak and variable signal strength. Television viewing in a stationary vehicle
will result in an improvement, but may still be marginal due to signal strength. The quality of the picture will not be consistent with home TV
reception. Reception may be affected by weather and distance from TV station. Aweak signal may cause the picture to roll, be snowy, or cause
some color loss.
3
Congratulations on your purchase of the JENSEN JE17FDTV DVD
Player with Drop-Down Video Monitor. The JE17FDTV has been
designed to give you and your family many years of video
entertainment in the mobile environment. Please read the directions
that follow to familiarize yourself with the product to ensure that you
obtain the best results from your equipment.
Please note: Installation options vary, see the individual owner’s
manuals for each component in your system to obtain a full
understanding of each component’s operation.
Safety Precaution
For safety reasons, when changing video media it is recommended
that the vehicle is not in motion, and that you do not allow children
to unfasten seat-belts to change video media or make any
adjustments to the system. System adjustments can be
accomplished using the remote control, while seat-belts remain
fastened. Enjoy yourAudiovox entertainment system but remember
the safety of all passengers remains the number one priority.
FEATURES
»DVD Player with 17" LCD (Liquid Crystal Display) TV /
Monitor
»Built In DVD Player
»Built In TV Tuner Air/CATV
»Closed Captioning
»V-chip function
»2 Channel IR Transmitter for wireless headphones
»1 AV Output
»1 Audio input for Channel 2 IR transmitter
»2 Wired headphone outputs
»1 External Speaker output
»Wireless Remote control included
»Anti-Theft code lock
4
CONTROLS AND INDICATORS DIAGRAM
1
17
18
19
20
21
22
11
12
13
14
15
16
2
3
4
5
6
7
8 8
9
10
5
CONTROL FUNCTION DESCRIPTION
1. Disc Insertion Slot
For loading Disc.
2. POWER Button
Use to turn the system ON / OFF. Bright red when system is on, dim when off.
3. SOURCE Select
Use to select one of the four sources. (DVD, AUX / *GAME (Optional), AV1, TV)
4. SCREEN MODE Button
Use to change screen format (Aspect Ratio, 4:3 or 16:9)
5. CHANNEL DOWN (q) Button
Use this button to decrease the channel number.
6. CHANNEL UP () Button
Use this button to increase the channel number.
7. Infrared Transmitter and Sensor
Use to transmit audio to the 2 channel wireless headphones. Also allow the remote control to operate the system and to control other
accessories in the system.
8. Dome Light
Provide additional interior illumination.
9. Three position Dome Light Switch
• Auto – Automatically switches on the dome lights in conjunction with the vehicle's interior illumination.
• Off – The dome lights will not turn on in this position.
• On – Turns on the dome lights.
10. Screen Release
Move to front direction to release the drop down screen.
11. Auxiliary Video Input
12. Auxiliary Audio Right Input
13. Auxiliary Audio Left Input
14. Game Port
Connect the game controller (Optional) to this input to play a variety of video games.
15. Side Remote Sensor Eyes
Allow the remote control to operate the system and to control other accessories in the system.
16. Drop Down LCD Panel
17. Headphone Jack
Allow the use of wired headphones with a 1/8" plug for listening to the video program audio.
18. Volume (q) Button
Use this button to decrease the volume level of the headphone jacks or external speaker.
19. Volume (p) Button
Use this button to raise the volume level of the headphone jacks or external speaker.
20 Play (u) Button
This button is used to start playback of a disc.
21. Stop (<) Button
To stop playback.
22. Eject () Button
For ejecting discs from the disc compartment.
6
REMOTE CONTROL OPERATION
BATTERY COVER
Battery Installation
Before attempting to operate your Remote Control, install the
batteries as described below.
1) Turn the Remote Control face down. Using a fingernail, lift the
battery cover off.
2) Install two “AAA” batteries as shown. Make sure that proper
polarity (+ or -) is observed.
3) Align the cover tabs with the remote control and press down
until the cover clicks.
The remote control will operate the unit and most Audiovox VCP’s.
It is not a universal remote control and will not control equipment
from other manufacturers.
SETUP
REPEAT
SUBTITLE
SOURCE
AUTO
MEMORY
SKIP/
SEARCH
ERASE/
WRITE
RETURN
A-B
MENU
1
4
7
ENTER
+
PIXMUTE
9
2
5
8
6
3
POWERPOWER
IRTA
ON/OFFON/OFF ON/OFFON/OFF
ANGLE
EJECT
IRTB
CH
CH
VCPTV DVD
CHANNEL
SELECT
FMM
ON/OFF
DISPLAY
ZOOMAUDIO
PLAY
STOP
II PAUSE
--
SOURCE
SELECT
SCREEN
MODE
1
2
3
4
5
7
6
8
9
10
11
12
13
14
15
16
17
18
19
20
21
23
22
24
25
26
27
28
29
30
31
32
34
33
35
36
37
38
0
39
40
41
42
VOL
7
* Function control is available on the unit and the remote control.
** Not used in this model
*** Function control only available in TV mode.
1. POWER Button*
Press this button to turn the unit on. Press the button again to turn the unit off.
2. SOURCE Button*
Each time the button is pressed, the audio / video source will change: DVD, AUX / GAME (Optional), AV1 and TV.
3. AUTO MEMORY Button (AUTO PROGRAM Button)***
When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of sufficient levels
are automatically stored.
4. SKIP / SEARCH Button**
This button selects between SKIP and SEARCH mode. In “SKIP mode” the TV tuner will tune and stop on channels that are programmed
into memory when the CHANNEL UP/DOWN buttons are used. When the SKIP mode is disabled, the TV will stop on all active channels.
5. ERASE / WRITE Button***
While tuned to a channel, pressing this button will store or erase the channel from memory. The stored channel numbers are displayed
in “GREEN” and the erased channel numbers are displayed in “RED”.
6. Channel Up () Button
Use this button to increase the channel number*** to the desired channel and to scroll upward in menu options.
7. MUTE Button
Press this button to mute the audio.
Pressing the button again restores the sound to the previously set level.
REMOTE CONTROL FUNCTION DESCRIPTIONS
8
8. ENTER Button
Used to implement a selected setting or menu option.
9. LEFT ( t) Button
Allows the user to shift left in the menu options.
10. MENU Button
Allows the user to access the DVD (DVD MODE) main menu and monitor menu (TV MODE).
11. RETURN Button**
Only available in VCP mode.
12. TV Mode Select Button***
Switches certain function keys on the remote control for TV functions.
13. DVD Mode Select button
Switches certain function keys on the remote control for DVD functions.
14. DISPLAY Button
Press to display DVD Disc current information.
Press DISPLAY button DVD Player Perform
Once Display current TITLE , CHAPTER & elapsed time
Twice Display current SUBTITLE
3 times Display current AUDIO language & channel
4 times Display current surround mode
5 times Display current ANGLE
6 times Display A-B repeat status
7 times Display REPEAT status
8 times Display off
For Subtitle, Audio, Surround, Angle, A - B & Repeat, press Enter key repeatedly to change the options. These options may vary
from disc to disc.
9
15. FM TRANSMITTER ON/OFF Button**
Turns the wireless FM Modulator power on/off.
16. AUDIO Button
Press this button to display and select the desired AUDIO language. Each time the button is pressed, the language or track changes.
NOTE: The languages & tracks you can select are vary from disc to disc.
17. ZOOM Button
Press this button to zoom the picture
Press ZOOM button OSD DVD Player Perform
Once 2X ZOOM picture 2 times
Twice 3X ZOOM picture 3 times
3 times 4X ZOOM picture 4 times
4 times 1/2 Reduces picture to 1/2 normal size
5 times 1/3 Reduces picture to 1/3 normal size
6 times 1/4 Reduces picture to 1/4 normal size
7 times OFF Returns to normal size
18. PAUSE () Button
Allows the user to pause the playback. Pressing the Pause button again or the Play button will resume playback.
19. STOP () Button*
Disc playback will be stopped.
20. PREVIOUS (9) Button
Allows the user to return to the previous chapter or track.
21. NEXT (:) Button
Allows the user to skip to the next chapter or track.
10
Tabla de contenidos
Otros manuales de Reproductor de DVD de Jensen
Jensen
Jensen MEDIA LINK 7100 Twin Manual de usuario
Jensen
Jensen Media Link 10200 Manual de usuario
Jensen
Jensen Mobile Multimedia DVD/MP3/WMA Receiver... Manual de usuario
Jensen
Jensen AWM950 Manual de usuario
Jensen
Jensen JN102 - 10.2" LCD Overhead Monitor System Manual de usuario
Jensen
Jensen Link 8500 Manual de usuario
Jensen
Jensen Media Link 7500 Manual de usuario
