Jenile CBM14 Manual de usuario
PACK DOORBELL
INSTRUCTION MANUAL
Specially designed for deaf and hearing impaired people.
All your products are already
connected to each other.
2
The contents of your package
Flash cube CBM14
Vibrator pocket VP15
Doorbell SP14
Summary :
3
4 :
5-10 :
11-16 :
17-18 :
A- Doorbell
B- Vibrator Pocket
C- Flash Cube
E- 2 USB connection port
F- Manual instruction in english
D- Adaptaters for 3 USB port
A B C
D E F
The contents of your package
x2
4
BA C D E F G
A- Flashlight duration 30 / 60 / 90 second
B- Micro USB charger port
C- Vibrator connection port (optional)
E- Light / off / Light+Sound
F- USB connection port
G- Micro USBconnection port
D- Connection plug
Technical Specifications
Wireless
Rechargeable battery
Weight: 171,5g
Distance: 200 meter maximum in free fields
Quantity of connected products: 20 units max.
Power supply: 3,7V 2200mAh Lithium battery.
Charge voltage must be limited to 4,2V
Standby current: <4,5 mA
Operating current: <800 mA
Radio frequency: 433 Mhz
Decoding format: MCU
Dimensions (height x width x depth): 9,2 x 8,8 x 4,3 cm
Autonomy: 1 month (depending of the use)
2 years guarantee (battery 1 year)
Flash Cube CBM14
5
Red LED: low battery, you need
to recharge the cube
Green LED: battery is in charge
No LED lightened up:
the charge is complete
Warning: it is also possible that no LED is lightened up because
the battery is completely empty. Therefore, you need to charge it.
Use
Thanks to the cube, you receive the signal from the Jenile doorbell and also all the
other calls, safety signals and technology Jenile.The CBM14 Jenile Flash cube
includes a rechargeable battery. A LED at the bottom right of each device indicates
the charge status of the battery:
6
B
F
G
B
Test
The cube is easy to test. If the cube does not work in accordance with the
instruction below, we invite you to contact your seller. To test your cube press on
your Jenile doorbell.
If the cube does not light up, please check that the battery is not empty by putting
your cube in charge:
Insert the G port of your cable on a USB support
Insert the F port of your cable in the B plug of your device
If the green LED at the bottom right of your device does not light up, it means that
your device is fully charged.
7
1. Press the plug button (D) on the cube.
D
Settings
if you want to complete this pack with other Jenile transmitters (see products on
page 16), then make adjustments to connect your devices between each other.
To connect all your products, please follow the instructions carefully.
2. Release it as soon as the cube lights up in
red (WARNING: do not hold down the button
after the color lights up, you are at risk of
deleting all previous connections)
3. Immediately actuate one transmitter while
the red light is on (ring the bell, press on the
remote control, shout on the baby crying
detector, …) Or refer to the instruction manual
of your transmitter.
8
D
To stop the flashes, press on the D button.
3 possibilities:
Your cube flashes in all colors: congratulations! The connection il success
ful! You can use all your Jenile products.
Your cube does not flash: the connection has failed, please try again the
instructions above.
Your cube flashes 2 time in red, it doesn’t flash when you put the button.
The connection has failed because you pressed too long on the plug
button. You erased the memory and have to restart all the connections.
The (A) button allows you to choose how long your cube flashes: 30 secondes, 1
minute or 1 minute 30.
9
Signals and colors
The CBM14 Jenile cube can be used with all the transmitters from the Jenile range.
For all alerts, the top of the cube will flash in all colors. The color at the bottom of
the cube will indicate the alert type (more colors page…). For doorbell cube turns
green.
GREEN: Bells
-Door bells
-Video bells
-Video Gate
-Acoustic transmitter
-Call button, …
RED: Emergencies
-Smoke detector
-Gas detector,
-water flood detector, ..
BLUE: Calls
Text messages
Computer call (skype, oovoo, ..)
Phone, fax, …
WITHOUT COLOR: Presence alerts
Door/window opening detector
Motion detector
10
Este manual sirve para los siguientes modelos
2
Otros manuales de Accesorios de Jenile
