Contents
1. GENERAL INFORMATION............................................................................................... 3
1.1. Application................................................................................................................. 3
1.2. Technical data............................................................................................................ 3
1.3. Equipment included ................................................................................................... 4
1.4. Dimensions................................................................................................................ 5
1.5. Design ....................................................................................................................... 6
2. SAFETY PRECAUTIONS.................................................................................................. 7
3. STARTUP AND OPERATION........................................................................................... 9
3.1. Checking the oil level................................................................................................. 9
3.2. Checking the air filter ................................................................................................10
3.3. Filling the fuel tank....................................................................................................11
3.4. Installing, removing, and operating the annular cutter...............................................12
3.5. Installing and removing the rail profile templates.......................................................14
3.6. Installing and removing the hole center positioner.....................................................15
3.7. Clamping the machine onto the rail and unclamping.................................................16
3.8. Connecting and disconnecting the cooling system....................................................17
3.9. Drilling.......................................................................................................................18
4. ACCESSORIES...............................................................................................................22
4.1. Rail profile templates.................................................................................................22
4.2. Hole center positioners .............................................................................................23
4.3. Attachment for tram rails...........................................................................................24
4.3.1. General information.......................................................................................24
4.3.2. Installing the clamping unit ............................................................................25
4.3.3. Installing the annular cutter............................................................................26
4.3.4. Installing the rail profile templates..................................................................27
4.3.5. Installing the hole center positioner................................................................28
4.3.6. Clamping the machine onto the rail................................................................29
5. DECLARATION OF CONFORMITY.................................................................................31
6. QUALITY CONTROL .......................................................................................................31
7. WARRANTY CARD..........................................................................................................33
