JDbug MS119Y Manual de usuario
Free Style Scooter
MS119Y
MS119TC
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer
Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
3
Safety Warnings
AN IMPORTANT MESSAGE TO PARENTS:
This manual contains important safety information. For your child’s safety, it is your
responsibility to review this information with your child and make sure that your child
understands all warnings, cautions, instructions and safety topics. JDBug recommends
that you periodically review and reinforce the information in this manual with younger
riders. You should also regularly inspect and maintain your child’s scooter to ensure
their safety.
GENERAL WARNING:
Scooter riding can be a hazardous activity. Scooter can, and are intended to move and it
is therefore possible to get into dangerous situations and/or lose control and/or fall. If
such things occur you can be seriously injured or die.
LIKE ANY OTHER MOVING PRODUCT, USING A SCOOTER CAN BE A DANGEROUS
ACTIVITY AND MAY RESULT IN INJURY OR DEATH EVEN WHEN USED WITH PROPER
SAFETY PRECAUTIONS. USE AT YOUR OWN RISK AND USE COMMON SENSE.
•Always wear proper protective equipment, such as an approved safety helmet,
elbow pads, knee pads and lace-up athletic shoes are recommended. Don’t ride
barefoot or in sandals. Keep shoelaces out of the way of wheels.
•Ride the scooter only on smooth, paved surfaces away from motor vehicles.
•Never ride the scooter at dusk or night or in wet or icy conditions.
•Avoid street and surfaces with water, sand gravel, dirt, leaves, sharp bumps,
drainage grates and other debris, because surface changes may cause the
scooter to suddenly stop, and wet weather impairs traction, braking and visibility.
•Remove all sharp edges caused during the use.
•Protective equipment should be worn.
•Do not exceed 100kgs (220LBS) total weight on the scooter.
•Adults must assist children in the initial adjustment procedures to unfold scooter,
adjust handlebar and steering to height, and finally to fold scooter.
•Do not allow children under age eight (8) to use the scooter. All children and
preteens should ride with adult guidance at all times.
•Brake will get hot from continuous use. Do not touch after braking. Do not
remove the braking system.
•Please do proper maintenance on bearings.
•After several times maintenance, bolts and nuts may be damaged and broken.
•Replace worn or broken parts immediately.
4
ACCEPTABLE RIDING PRACTICES AND CONDITIONS:
Direct parental supervision is required. Scooters are meant to be used only in controlled
environments free of potential traffic hazards and not on public streets. Do not allow
your child to ride a scooter in any areas where vehicle traffic is present. Rider must
maintain a hold on the handlebars at all times by using both hands. Never allow more
than one child at a time to ride a scooter. Never use near steps, sloped driveways, hills,
roadways, alleys or swimming pool areas. Keep fingers and other body parts away from
the product when folding or unfolding. Adults must not allow children to assist in folding
or unfolding the scooter.
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS FURTHER
INCREASES RISK OF SERIOUS INJURY. USE AT YOUR OWN RISK AND WITH APPROPRIATE
AND SERIOUS ATTENTION TO SAFE OPERATION.
WARNING:
DO NOT USE NON-JDBug PRODUCTS WITH YOUR JDBug SCOOTER. Your scooter has
been built to JDBug design specifications. All the original equipments supplied at the
time of sale were selected on the basis of their compatibility with the frame, fork and all
other parts. Certain after market products may or may not be compatible with your
JDBug Scooter. Unsuitable modification can be hazardous ! Consult your retailer or call
JDBug prior to modifying or replacing any component with a non-factory specified
product.
WARNING:
CHECK LOCAL LAWS REGARDING SCOOTER USE. Check local laws and regulations to see
where and how you may use your JDBug scooter legally.
Check local laws and regulations governing helmet use and scooter operation in your
area.
USE CAUTION
WARNING:
ALWAYS INSPECT SCOOTER PRIOR TO RIDING. Properly inspecting and maintaining your
scooter can reduce the risk of injury. Always inspect your scooter before riding and
regularly maintain it.
5
SCOOTER PARTS AND COMPONENTS
b. MS119T
(T style handlebar)
Grip
T-tube/ Steerring Column
Collar clamp
Front fork
Wheels
Oblique tube
Deck
Rear fender/ brake
Handlebar
6
c. MS119TC
ASSEMBLY INSTRUCTIONS
a. Assembling the handlebar
Loose the collar clamp and slide it upward. With a clock-wise twisting motion, push and
thread the T-tube onto the fork until it bottoms out on the fork headset lock nut.
Handlebar
Grip
Oblique tube
Deck
Rear fender/ brake
Wheels
Front fork
Collar clamp
T-tube/ Steerring Column
7
With the front wheel pointed straight ahead, the handlebars square to the front wheel
and the JDBug Logo facing the front, tighten the clamp securely.
b. Replacing the Wheels and Bearings
Front wheel sequence
Securely tighten the bolt as shown
Rear wheel sequence. Securely tighten the bolt as shown
Note: When self-locking nuts and other self-locking fixings may lose their effectiveness.
8
CLEANING YOUR SCOOTER
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or
solvents as they may damage the surfaces. Do not use the alcohol, alcohol-based or
ammonia-based cleaners as they may damage or dissolve the plastic components or
soften the decals or decal adhesive. Store the scooter in a dry, dust-free place.
WHEELS AND BEARINGS
Under normal circumstances and conditions, the wheels and the bearings are
maintenance free. Nonetheless, it is the responsibility of the owner or guardian to
periodically inspect the wheels for wear and tear, the axle for proper tightness and
bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops
play, this is an indication of excess wear and replacement is necessary. Replace
immediately with only JDBug wheels. Worn wheels/bearings are considered normal
wear-and-tear and are not covered by the JDBug Warranty. Wheels other than JDBug
wheels may not be compatible with your JDBug scooter. The use of anything other than
JDBug replacement parts may affect your safety and will void your warranty.
SAFETY REMINDERS
Loose Parts
Check and secure all fasteners before every ride. Make sure the steering bolts and foot
steppers are tight. There should not be any unusual rattles or sounds from loose parts
or broken components. If you are not sure, ask an experienced mechanic to check.
Brake
Check the brake for proper function. When you squeeze the lever, the brake should
provide positive braking action.
Frame, Fork and Handlebars
Check and secure all fasteners before every ride. Make sure the steering bolts and foot
steppers are tight. There should not be any unusual rattles or sounds from loose parts
or broken components. If you are not sure, ask an experienced mechanic to check.
Safety Gear
Always wear proper protective equipment such as an approved safety helmet, elbow
pads and kneepads. Always wear shoes (lace-up shoes with rubber soles), never ride
barefooted or in sandals, and keep shoelaces tied and out of the way of the wheels.
9
Be Careful !
You will see people you know on TV doing tricks and stunts. These are people who have
been practicing on scooters for a very long time. Don’t try something until you are ready.
Avoid steep inclines and don’t ride too fast-you might lose control and fall. Skateboard
parks are not designed for scooters. Never ride in traffic or on the street and watch your
surroundings for pedestrians, bikers, boarders and skaters.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the
claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g. during transport, cleaning
by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
10
Vážený zákazníku,
Děkujeme vám za zakoupení našeho produktu. Před prvním použitím si prosím pečlivě
přečtěte následující pokyny a uschovejte si tento návod k použití pro budoucí použití.
Zvláštní pozornost věnujte bezpečnostním pokynům. Pokud máte k přístroji jakékoli
dotazy nebo připomínky, obraťte se na zákaznickou linku.
✉www.alza.cz/kontakt
✆+420 255 340 111
Dovozce Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Idiomas:
Otros manuales de Scooter de JDbug
JDbug
JDbug Sky Bug MS101JD Manual de usuario
JDbug
JDbug MS138J Manual de usuario
JDbug
JDbug XF-136 Cool Carver Manual de usuario
JDbug
JDbug MS185F Manual de usuario
JDbug
JDbug MS-305 Manual de usuario
JDbug
JDbug MS108(T) Manual de usuario
JDbug
JDbug Pro 1 Manual de usuario
JDbug
JDbug Cool Carver-1 XF126 Manual de usuario
JDbug
JDbug GS300 Manual de usuario
