Japan CBM Corporation CMP-10 Manual de usuario
CMP-10 Service Manual
CMP-10 Rev. 1.00 P 1/41Date: 2002.07.25
CMP-10
SERVICE MANUAL
PRODUCT NAME: CMP-10
TERRITORY: TD
REVISION: 1.0
DATE: 2002.07.25
DESIGNED:
APPROVED:
APPROVALS:
R&D Department :
QC Department :
Manufacturing Department :
Marketing Department :
CMP-10 Service Manual
CMP-10 Rev. 1.00 P 2/41Date: 2002.07.25
REVISION
Rev. No. Date Comment
Rev. 1.0 July24,2002 Newly issued
CMP-10 Service Manual
CMP-10 Rev. 1.00 P 3/41Date: 2002.07.25
INTRODUCTION
This manual describes the disassembly, reassembly, and maintenance procedures of Citizen Mobile Printer
CMP-10. It is intended for field maintenance men.
1. FEATURES
This small, portable line thermal printer is designed for various types of Personal Data Assistance (PDAs)
devices, notebook computers, mobile phones etc. Its abundant built-in features allow you to widely use this
printer for different applications.
Prior to using it, read and understand this manual thoroughly.
(1) Small, lightweight, you can carry it everywhere
(2) High speed and low noise, owing to line thermal print
(3) Long-life printing head and high reliability, owing to the simple mechanism
(4) Easy paper-loading, owing to clamshell mechanism
(5) Built-in input buffer - 64 K
(6) Capable of printing a bar code (Special command)
(7) Capable of IrDA communication
(8) Capable of using magstripe reader
(9) Interfaces to Pocket PC and PALM OS devices
CMP-10 Service Manual
CMP-10 Rev. 1.00 P 4/41Date: 2002.07.25
2. GENERALSPECIFICATIONS
Feature Parameters
1. Printing system Direct thermal printing
2. Printing speed 50 mm/sec
3. Printing head Total dots: 384
Dot density: 8 dots/mm
Printingwidth:48mm
4. Emulation ESC/POS commands + Unique commands
(with some unique functions)
5. Characters ASCII Code, Alphanumeric characters,
International characters, Windows Code page
6. Characters per line FONT A: 32 characters/line, FONT B: 42 characters/line
7. Dotmatrix FONT A: 12H × 24V, FONT B: 19H × 16V
8. Bar code type UPC-A/E, JAN(EAN)13/8 columns, ITF, CODE39,
CODE128, CODABAR
9. Paper feed system Friction feed
10. Paper width 58 ±0.5 mm
11. Paper thickness 60 - 65 µm
12. Recommended paper TF50-KS-E2D (Nippon Paper)
13. Paper roll maximumdiameter 40 mm (CMP-10-40), 50 mm (CMP-10-50)
14. Minimum core diameter 8 mm
15. Interfaces IrDA version 1.0
Serial interface (by special cable - option)
16. IrDA Interface Mode: Infrared transceiver mode
Transport wave: Wave length - 850 to 900 nm
Communicationspeed:9600,19200,38400,57600,
115200 bps
Data length: 8 bits
Start bit: 1 bit
Stopbit:1 bit
Parity: none
Communication:Halfduplex
Flow control: IrDA standard
Communication distance: Max. 80 cm
17. Serial interface Speed:1200,2400,4800,9600,19200,57600,115200bps
Interface: Bidirectional serial communication
Signallevel:RS-232C
Data lenght: 8 bits
Start bit: 1 bit
Stopbit:1 bit
Parity: None
Flowcontrol:Xon/Xoffonly
Connector: Motorola Star Tac
18. Input buffer 64 KB
19. Mag stripe reader Track 1, 2, 3
20. LED color Power LED: GREEN and RED
Charge LED: GREEN and RED
CMP-10 Service Manual
CMP-10 Rev. 1.00 P 5/41Date: 2002.07.25
Feature Parameters
21. Operation switches Power switch 1, LF switch 1
22. Sensors and error monitoring Paper end sensor, Open cover sensor,
Head temperature, Low battery
23. Power consumption Idle - approximately 2W
When printing - approximately 15W
24. Battery Battery type: Li-ion battery pack
Cell Voltage: 3.7 V
Number of cells: 2
Battery pack voltage: 7.4 V
Battery pack capacity: 2000 mAh
25. Battery charging time Approximately 3 hours by main unit + AC adapter
26. Maximumlinesprinted with 40,000lines
fully charged battery (At temperature 20°C, standard setting, alphanumeric
slide pattern printing. The number of lines may be changed
by such condition as temperature, etc.)
27. Powersupplymonitoring Auto Power OFF (programmable - from 1 to 60 sec.)
Low battery monitoring included.
28. AC Adapter Model: 10AD-JU (for Japan, USA, and Canada)
10AD-E (Europe)
Input voltage 90 V - 264 V AC
Output voltage 9.0 V DC 1.0 A
29. OperatingEnvironment Temperature: 5 – 40°C
Humidity: 35 – 80% RH (No dew condensation)
30. Storage Environment Temperature: –20 – 60°C
Humidity: 10 – 90% RH (No dew condensation)
31. Reliability Print head: 50,000,000 pulses or 50km
(Normal temperature, 12.5% density, rated energy)
Mechanism:15,000,000lines
32. Safety standard and EMI UL, C-UL, TUV, GS, CE Marking
FCC Class B, VCCI Class B
33.Dimensions 116 (W) × 104 (D) × 63 (H) mm
(50 mm paper cover + Mag stripe reader)
34. Weight Approx. 370 g (with battery and belt clip without paper)
35. Options Serial Cable, Mag Stripe card reader (Factory option)
CMP-10 Service Manual
CMP-10 Rev. 1.00 P 6/41Date: 2002.07.25
3. DISASSEMBLY AND REASSEMBLY
In case of maintenance work, observe the following:
CAUTION
(1) If the printer functions properly, do not disassemble, reassemble, or adjust it. Particularly, do not loosen
each set screw unless required.
(2) After inspecting the printer, be sure to confirm that it is free from error.
(3) Never try to print without setting the printing paper in the printer. Confirm that it is properly set.
(4) In case of maintenance work, be careful not to leave the used parts or screws in the printer.
(5) When handling the thermal head or control board, do not wear the gloves which will easily cause static
electricity. Prior to handling it, discharge static electricity from your body. Also, never conduct
maintenance work in a place where the printer will be easily electrified.
(6) When disassembling and reassembling, check the cords and boards for any damage, and do not cable or
fix them in an inappropriate manner by force.
(7) Never carry out maintenance work with the power turned on.
3.1 Disassembly Procedure
1. Prior to Disassembly
(1) Disconnect all the cables from the the main body. For your safety, unplug a power cord from a
plug socket.
(2) Open the paper cover.
CMP-10 Service Manual
CMP-10 Rev. 1.00 P 7/41Date: 2002.07.25
Screw
(4) Unscrew the screw on the bottom of the paper magazine.
(5) Close the paper cover.
(3) Remove the paper roll from the paper magazine.
CMP-10 Service Manual
CMP-10 Rev. 1.00 P 8/41Date: 2002.07.25
2. Removing the battery cover
(1) Press the marked area on the battery cover and lift the cover.
3. Removing the battery
(1) Open the battery cover as shown above.
(2) Take out the battery pack.
(3) Disconnect the battery pack from the connector.
(4) Remove the battery pack from the battery compartment.
CMP-10 Service Manual
CMP-10 Rev. 1.00 P 9/41Date: 2002.07.25
(5) Remove two M3 ×10 (BT) screws.
4. Removing the back cover
(1) Turn the printer downward.
(2) Push the front cover at the places shown on the drawing and lift the back cover.
(3) Remove the back cover.
CMP-10 Service Manual
CMP-10 Rev. 1.00 P 10/41Date: 2002.07.25
5. Removing the paper cover
(1) Lift the printer.
(2) Take out the paper cover as shown on the drawing.
6. Removing the Main PCB and Operational Panel
(1) Unscrew the three screws with which the Main PCB is fixed to the plastic case as shown on the
drawing.
Tabla de contenidos
