Jabra Elite 3 Instrucciones de funcionamiento

Troubleshooting Steps for Jabra Elite 3

How do I pair my Jabra Elite 3 with my mobile device?

To pair your headset with your mobile device or tablet, follow these steps.

1. Turn on the Bluetooth setting on your mobile device.

2. Turn on your earbuds by removing them from the charging case.

Alternatively, simultaneously press the Left and Right buttons.

The LEDs on both earbuds will turn green.

3. To enter pairing mode, simultaneously press and hold (3 seconds)

the Left and Right buttons on the earbuds, until the LEDs on the earbuds

flash blue.

The earbuds are now ready to pair with your mobile device.

Note

If you want to use just one earbud, you must still pair both earbuds with

your mobile device. After the pairing, you can place one of the earbuds in

the charging case.

4. To pair, go to the Bluetooth menu on your mobile device and select the

Jabra Elite earbuds from the list. If the Jabra device is listed more than once,

select the entry showing the headphone icon. Enter “0000” (four zeros) if

you are asked for a PIN.

In daily use, when you turn on the earbuds, they will automatically reconnect with the

last previously paired device, if it is turned on and within range.

How do I access the voice assistant using my Jabra device?

To access the voice assistant on your mobile device using your Jabra device, double-

press the Left button when not on a call.

How do I access the voice assistant using my Jabra device?

To access the voice assistant on your mobile device using your Jabra device, double-

press the Left button when not on a call.

How do I manually turn on/off HearThrough on my Jabra Elite 3

 Jabra Sound+ - iOS

 Jabra Sound+ - Android

HearThrough is enabled by default on your Jabra device. When you are not on a call, you

can turn on and off HearThrough by pressing the button on the Left earbud.

Note

HearThrough will turn off automatically during a call, and then resume when the call is

finished.

How do I update the firmware on my Jabra Elite earbuds using Jabra Sound+

 Jabra Sound+ - Android

 Jabra Sound+ - iOS

If your earbuds are paired with your mobile device, when you open Jabra Sound+, a

notification will appear when a new firmware is available. The Discover icon will also

pulse with a red glow.

To install new firmware, follow these steps.

1. Remove both earbuds from the charging case and make sure they are paired

with and within range of your mobile device.

2. In Jabra Sound+, tap the Discover icon.

3. Tap Update now to start the update process.

4. Follow the onscreen instructions to update your earbuds. This may take up

to 15 minutes and is indicated by the earbud LEDs flashing pink.

Note: Do not use the earbuds while the LEDs are flashing pink.

5. A notification appears on the screen when the firmware update is complete.

How do I manually reset my Jabra earbuds to the default settings?

When you reset your Jabra earbuds, previously paired devices and settings will be

cleared.

Follow these steps to reset.

1. Place both earbuds in the charging case with the lid open. Ensure your

earbuds are sufficiently charged.

2. Press and hold (10 sec) the Left and Right buttons on the earbuds

simultaneously until the earbud LEDs flash pink.

3. When the earbud LEDs stop flashing pink, the earbuds have been reset.

Note

You cannot reset only one of the earbuds. If you attempt to reset just one

earbud, it keeps flashing pink until you reset the other.

The earbuds will need to be re-paired to your mobile device. Remember to

delete/forget the pairing in the Bluetooth menu on your mobile device.

Otros manuales para Elite 3

Tabla de contenidos

Otros manuales de Auriculares de Jabra

Jabra

Jabra Connect 5t Titanium Black Manual de usuario

Jabra

Jabra Pro 9450 Mono Manual de usuario

Jabra

Jabra BIZ 620 Manual de usuario

Jabra

Jabra OTE20 Hoja de especificaciones

Jabra

Jabra JX20 - Pura - Headset Manual de usuario

Jabra

Jabra PRO 9460 - REV G Manual de usuario

Jabra

Jabra BT2010 - ANNEXE 746 Manual de usuario

Jabra

Jabra GO 6430 Manual de usuario

Jabra

Jabra GN 2000 - ANNEXE 736 Manual de usuario

Jabra

Jabra Talk 55 Guía de instalación

Jabra

Jabra GO 6470 Manual de usuario

Jabra

Jabra GN9350e Guía de instalación

Jabra

Jabra BT3010 - Headset - In-ear ear-bud Manual de usuario

Jabra

Jabra Pro 9460 Mono Manual de usuario

Jabra

Jabra 405-Flex-SF Manual de usuario

Jabra

Jabra PRO 9450 Manual de usuario

Jabra

Jabra MINI Hoja de especificaciones

Jabra

Jabra Jabra BH870 Manual de usuario

Jabra

Jabra BT2070 - Headset - In-ear ear-bud Manual de usuario

Jabra

Jabra BT2010 - ANNEXE 746 Manual de usuario

Jabra

Jabra PRO 9460 Duo Manual de usuario

Jabra

Jabra STEALTH Silver Manual de usuario

Jabra

Jabra Pro 920 Duo Manual de usuario

Jabra

Jabra ACTIVE Manual de usuario

Manuales populares de Auriculares de otras marcas

Sena

Sena SMH10 Manual de usuario

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manual de usuario

Sennheiser

Sennheiser EPOS ADAPT 230 Manual de usuario

Doro

Doro Flexus HS2005 Manual de usuario

GE 98971 Manual de usuario

Hama

Hama 00184070 Manual de usuario

Plantronics

Plantronics Blackwire 3200 Series Manual de usuario

Blue Tiger

Blue Tiger Advantage PLUS Manual de usuario

Jawbone

Jawbone Icon Manual de usuario

Roxcore

Roxcore Flow A+ Manual de usuario

Turtle Beach

Turtle Beach XP 510 Manual de usuario

Philips

Philips SHB6101 Manual de usuario

HyperX

HyperX HyperX Cloud Flight Manual de usuario

Bose

Bose MIE2 Mobile Manual de usuario

HyperX

HyperX cloud ii Manual de usuario

Southwing

Southwing SA505 Manual de usuario

Plantronics

Plantronics VOYAGER 520 Manual de usuario

Blueant

Blueant X5i Manual de usuario