Jabra EHS30 Manual de usuario

Jabra Headset Installation

Overview

EHS30 Included Contents

EHS30

3.5MM DC Jack

RJ12 Cord

RJ45 Cord

EHS30 Ports

RJ-12 Port for IP Phone EXT/EHS or Expansion Module

Operation LED

3.5mm DC Power Jack (not applicable to Jabra Headsets)

RJ-45 Jack

Headset Base and Phone Ports

Jabra 92X and 93X series Jabra 94XX series

Back of Sangoma S700 Phone

Jabra 92X and 93X Series Installation with EHS30

Putting 92X and 93X Headset in to DHSG Mode

Before beginning, make sure the headset is charged and paired with its base. Then:

Put on headset to hear audio prompts.

Press and hold both volume buttons at the same time until you hear “Setup," then release the buttons.

Press the talk button repeatedly until you hear “Remote Call Control."

Press the volume down button until you hear “DHSG."

Press the talk button to select.

Press and hold both volume buttons at the same time until you hear “Goodbye," then release the buttons.

The headset base will reset and update settings, indicated by the white battery icon on the base.

You need to make sure your Jabra headset is set up for the DHSG remote call control mode and not another mode such as IQ or auto-

detect. If your headset is not in DHSG mode, the headset may lose audio shortly after going off-hook (approximately 5-10 seconds).

Connecting the Cables

The following figure shows the connections between the EHS30 Adapter, the bottom of the Sangoma Phone, and the Jabra Wireless Headset

base unit. See the detailed instructions below.

Connect the included RJ45 Ethernet cable between the Aux Port of the Jabra Wireless Headset base unit and the RJ45 port (Port 4) of

the EHS30 Adapter.

Aux Port on 92X/93X Headset Base

RJ45 Port on EHS30

Connect the included RJ-12 cord between the EHS30 Adapter RJ12 Port (Port 1, next to the green LED light) and the EXT/EHS Port of

the Sangoma Phone.

RJ12 Port on EHS30

EXT/EHS Port on Sangoma S700 Phone

Connect the included RJ-9 cord from the telephone port on the Jabra Wireless Headset base unit to the headset port of the Sangoma

phone.

Telephone Port on Headset Base (labeled in )92X/93X blue

Headset Port on Sangoma S700 Phone

Connect the headset base station's power cable between the DC port on the base station and a power outlet.

DC Port on 92X/93X Headset Base

Jabra 94XX Series Installation with EHS30

Putting 94XX Headset in to DHSG Mode

On the Jabra headset base LCD GUI:

Click setting icon Phone settings Desk phone Setup desk phone confirm Manual Select DHSG Press ">" several times Press "x." Then

Jabra will auto restart.

Connecting the Cables

The following figure shows the connections between the EHS30 Adapter, the bottom of the Sangoma Phone, and the Jabra Wireless Headset

base unit. See the detailed instructions below.

Connect the included RJ45 Ethernet cable between the Aux Port of the Jabra Wireless Headset base unit and the RJ45 port (Port 4) of

the EHS30 Adapter.

Aux Port on 94XX Headset Base

You need to make sure your Jabra headset is set up for the DHSG remote call control mode and not another mode such as IQ or auto-

detect. If your headset is not in DHSG mode, the headset may lose audio shortly after going off-hook (approximately 5-10 seconds).

RJ45 Port on EHS30

Connect the included RJ-12 cord between the EHS30 Adapter RJ12 Port (Port 1, next to the green LED light) and the EXT/EHS Port of

the Sangoma Phone.

RJ12 Port on EHS30

EXT/HHS Port on Sangoma Phone

Connect the included RJ-9 cord from the telephone port on the Jabra Wireless Headset base unit to the headset port of the Sangoma

phone.

Telephone Port on 94XX Headset Base (labeled in here)blue

Headset Port on Sangoma Phone

Connect the headset base station's power cable between the DC in port and a power outlet.

DC Port on 94XX Headset Base

Tabla de contenidos

Otros manuales de Adaptador de Jabra

Jabra

Jabra A320s Manual técnico

Jabra

Jabra GN Ellipse 2.4 Manual de usuario

Jabra

Jabra A210 Manual de usuario

Jabra

Jabra LINK 220 Manual de usuario

Jabra

Jabra 14201-36 Guía de instalación y uso

Jabra

Jabra A125s Manual de usuario

Jabra

Jabra A320s Manual técnico

Jabra

Jabra Link 14201-40 Manual de usuario

Jabra

Jabra A120s Manual de usuario

Jabra

Jabra Link 360 Manual de usuario

Jabra

Jabra GN 8110 USB-XP Manual de usuario

Jabra

Jabra LINK 400 Manual de usuario

Jabra

Jabra LINK 14201-17 - Manual de usuario

Jabra

Jabra LINK 14201-20 - DATASHEET FOR TOSHIBA PHONES Manual de usuario

Jabra

Jabra LINK 280 - Manual de usuario

Jabra

Jabra LINK 280 - Guía de inicio rápido

Jabra

Jabra LINK 350 Manual de usuario

Jabra

Jabra GN9330e - USB - Headset Guía de seguridad

Jabra

Jabra Link 360 Manual de usuario

Jabra

Jabra Link 950 USB-A Manual de usuario

Jabra

Jabra LINK 14201-36 Guía de instalación y uso

Jabra

Jabra A210 Manual de usuario

Jabra

Jabra A320s Manual de usuario

Jabra

Jabra HHC ADAPTER - DATASHEET CISCO Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario