J5 create JUA370 Manual de usuario

JUA370

USB 3.0 MULTI-ADAPTER

VGA & Gigabit Ethernet

JUA370

User Manual

Table of Contents

INTRODUCTIONS ............................................................................................................................. 3

System Requirements ................................................................................................................ 3

Specifications.............................................................................................................................. 4

Package Contents..................................................................................................................... 5

GETTING STARTED............................................................................................................................ 6

INSTALLATION FOR WINDOWS....................................................................................................... 6

Device Driver Installation.......................................................................................................... 6

Verify Device Driver Installation............................................................................................... 9

Uninstalling the Device Driver .................................................................................................. 9

INSTALLATION FOR MAC.............................................................................................................. 10

Device Driver Installation........................................................................................................ 10

Verify Device Driver Installation............................................................................................. 13

Network Setting on MAC......................................................................................................... 13

Uninstalling the Device Driver ................................................................................................ 14

FUNCTIONS INSTRUCTIONS: WINDOWS 7................................................................................... 15

FUNCTIONS: WINDOWS XP .......................................................................................................... 18

FUNCTIONS: MAC......................................................................................................................... 23

TECHNICAL SUPPORT........................................................................................................................ 27

LIMITED WARRANTY......................................................................................................................... 27

USB 3.0 MULTI-ADAPTER USER MANUAL

INTRODUCTIONS

The j5create USB 3.0 Multi-Adapter series provides extra connectivity for your computer with 5

Gb/s faster transfer speed. These pocket-sized multi-adapters allow you to add an additional

USB computer peripheral, VGA monitor or gigabit LAN through USB port.

With j5create multi-adapters, there is no need to open up your computer to add an

expensive graphics card, you simply load the drivers, plug in the adapter to the USB port, then

plug in the VGA monitor cable into the adapter and you are ready. It supports three viewing

modes: primary, extended, mirror modes. With “plug & play” functionality between your

computer and 2nd monitor or projector, you will be able to create a new visual environment

in seconds.

The gigabit multi-adapter allows you to add networking capabilities to a computer without

them through a Wi-Fi connection. It has an RJ-45 connector that supports 10/100/1000 Mbps

Ethernet performance – perfect for your Ultrabook or MacBook.

j5create’s elegant multi-adapter series provides you with a fast and portable alternative

solution.

System Requirements

Microsoft Windows 8, 7, XP (32-bit or 63-bit)

Mac OS X 10.8 / 10.7 / 10.6

CPU: Intel 2 core Quad 2.33 GHz

RAM: 2 GB DDR2

Available USB port (USB 3.0 is recommended)

Note for Video Player:

*Windows XP users: “Windows Media Player” is recommended for video playback

*Windows XP users & MAC users: Some Windows XP & MAC products are not supported

by USB 3.0 at this time, therefore we suggest USB 2.0 for ‘office applications’ only; Video

Playback is not recommend due to USB 2.0 bandwidth limitations causing limited video

performance.

Specifications

Interface

Host Interface

USB 3.0 Male Type-A connector

Video Interface

VGA-DB 15 pin Female connector

Ethernet Port

RJ-45 Female connector (Gigabit Ethernet)

USB Port

USB 3.0 Female connector

Power

Power Mode

Bus-powered

Functions

Display

Video Playback: 1080P

Display resolution: 2048 x 1152 @ 32bit

Display Modes: Primary, Extended, Mirror

Display Rotation: 0°, 90°, 180°, 270°

Ethernet

Transfer Rate:

1000 Mbps (Half Duplex) / 1000 Mbps (Full Duplex)

IEEE:

IEEE 802.3az, IEEE 802.3, 802.3u, and 802.3ab, IEEE

802.3x

Modes:

- Supports Wake on LAN function, suspend mode and

remote wakeup via link-change, magic packet, or

Microsoft wakeup frame

Supports IEEE 802.1Q VLAN tagging and 2 VLAN ID

filtering

- Supports Jumbo Frame

- Supports Checksum Offload (IPv4, IPv6, TCP, UDP)

and TCP Large Send Offload

Physical Specifications

Dimensions

Main body: 43.75(W)x 90.6(H)x18.6(D) mm

Cable length: 14.5 cm

USB 3.0 MULTI-ADAPTER USER MANUAL

Weight

Approximately 58.5 g (including cable)

Video Resolutions and Color Depth Support

Aspect Ratio

Resolution

Color Depth

Wide Screen Display

16:9 2048 x 1152 16,32 bits

16:10 1920 x 1200 16,32 bits

16:9 1920 x 1080 16,32 bits

16:10 1680 x 1050 16,32 bits

16:9 1600 x 900 16,32 bits

16:10 1440 x 900 16,32 bits

16:9 1360 x 768 16,32 bits

16:10 1280 x 800 16,32 bits

15:9 1280 x 768 16,32 bits

16:9 1280 x 720 16,32 bits

Standard Display

4:3 1600 x 1200 16,32 bits

4:3 1400 x 1050 16,32 bits

5:4 1280 x 1024 16,32 bits

4:3 1280 x 960 16,32 bits

4:3 1152 x 864 16,32 bits

4:3 1024 x 768 16,32 bits

4:3

800 x 600

16,32 bits

Package Contents

USB 3.0 Multi-Adapter JUA370

Quick Installation Guide

Driver CD

GETTING STARTED

Notes Before Installation

Install the driver completely before inserting the USB cable into your computer

Run the setup program as an administrator to avoid errors in installation

Connect the VGA Cable for the display to the VGA port on the JUA370 first before

connecting the USB cable to the computer

Un-install the previous driver first before installing the latest driver

1. Start the device driver installation (please refer to your PC system OS installation in the next

section) *Note: install driver completely before following steps 2 through 5.

2. Connect the USB 3.0 cable connector to the host laptop

3. Connect the VGA cable for the display device

4. Connect the Ethernet cable

5. Your USB HUB port is now ready to use

INSTALLATION FOR WINDOWS

Device Driver Installation

This section illustrates the simple device driver installation guide for Windows 7 operating system.

When your computer is ready to use, insert the Driver CD into the CD-ROM drive. The setup

program should be launched automatically; if it doesn’t, go to Computer, click on your CD

USB 3.0 MULTI-ADAPTER USER MANUAL

drive, and manually run the setup CD. Double Click on Setup.exe to start.

※Make sure the USB cable is unplugged from your PC or Notebook before executing the

installation program.

1. The installation page will be launched. To

start click on Install the Latest Driver. Please

make sure you are connected to the internet

or press Install Driver to start the installation.

2. After pressing the installation option, the

InstallShield Wizard will launch, click Next

to continue.

3. Read the license agreement, check I

accept the terms of the license agreement,

click Next >

4. When the Install Shield Wizard is complete,

select Yes, I want to restart my computer

now. Click Finish to restart.

5. After restarting your computer connect the

USB 3.0 MULTI-ADAPTER USB cable to your

PC or Notebook. The Installing device

driver software message will pop-up.

6. Windows 7:

When the driver software has been

installed successfully the message to the

right will appear on your computer.

Windows XP: An icon ( ) will be seen

on the lower right toolbar. Your driver

software was installed successfully when

the message to the right is shown.

The display functions of the USB3.0 Multi-Adapter will be activated after the computer has

been restarted. You might see the mirror display shown on the display device.

Windows 7:

You can modify the corresponding

position of each extend display via

display settings. Go to START →

Control Panel →Appearance and

Personalization →Adjust screen

resolution

※or Right click on the desktop and go

to Screen Resolution

When the Screen Resolution window

pops up, you can identify each

monitor’s number by clicking Identify.

You can drag the monitor to your

preferred location.

Windows XP:

You can modify the corresponding

position of each extended display via

display settings.

Go to Start →Control Panel →Display

Properties →Settings

When the Display Properties window

appears, each monitor’s number can

be identified by clicking Identify.

You can drag the monitor to your

preferred location.

Note:

If your internal graphics card has Dual Display Ports…..

When using one USB 3.0 MULTI-ADAPTER:

The display device that is connected to the 2nd VGA port will be numbered as the 3rd monitor

and the display device that is connected to the USB 3.0 MULTI-ADAPTER will be numbered as

the 2nd monitor.

USB 3.0 MULTI-ADAPTER USER MANUAL

Verify Device Driver Installation

Follow the steps below to verify the driver installation status of the USB 3.0 Multi-Adapter

Windows 7:

Right Click My Computer Manager



Device Manager



click +sign of

Network adapter & Sound, video and

game control & Universal Serial Bus

controllers

Windows XP:

Right Click My Computer, Manager →Device Manager click + sign of Display Adapter &

Network adapter & Sound, video and game controllers & Universal Serial Bus controllers

Uninstalling the Device Driver

*Unplug the USB Cable of the USB 3.0 MULTI-ADAPTER before uninstalling the driver

1. Click Start→Control Panel →Programs

and Features→Uninstall or change a

program Select j5 USB 3.0 MULTI-

ADAPTER... Click Uninstall

2. A message will appear confirming that you

want to un-

install the application. Click ‘ok’ to

continue.

3. When the driver is completely

uninstalled, select “Yes, I want to restart

my computer now.” Click Finishto

restart.

INSTALLATION FOR MAC

Device Driver Installation

Installing the device driver enables your computer’s operating system to recognize the USB3.0

Multi-Adapter. Be sure that you are referring to the appropriate installation procedure before

you begin installing.

※Make sure the USB cable is unplugged from your Mac Desktop or Mac Notebook before

executing the setup program.

This section illustrates the device driver installation procedure for a computer running Snow

Leopard.

1. Insert the Driver CD into the CD-ROM drive;

and run the .dmg file to load drivers in the

mac install folder

2. The installation page will be launched;

To begin installation click on start Get Last

Driver online, please make sure you are

connected to the internet or press Install Lan

to start the installation.

Tabla de contenidos

Otros manuales de Adaptador de j5 create

j5 create

j5 create JUA350 Manual de usuario

j5 create

j5 create JCH471 Manual de usuario

j5 create

j5 create JDA213 Manual de usuario

j5 create

j5 create JUA350 Manual de usuario

j5 create

j5 create Display Adapter Manual de usuario

j5 create

j5 create JUA375 Manual de usuario

j5 create

j5 create JUH410 Manual de usuario

j5 create

j5 create JLA160 Manual de usuario

j5 create

j5 create JUH450 Manual de usuario

j5 create

j5 create JUE303 Manual de usuario

j5 create

j5 create JUA310 Manual de usuario

j5 create

j5 create USB VGA/DVI Display Adapter Manual de usuario

j5 create

j5 create ScreanCast JVAW56 Manual de usuario

j5 create

j5 create JUA 310 Manual de usuario

j5 create

j5 create JUA210 Manual de usuario

j5 create

j5 create JUH450 Manual de usuario

j5 create

j5 create JCC111 Manual de usuario

j5 create

j5 create JUH470 Manual de usuario

j5 create

j5 create JUA210 Manual de usuario

j5 create

j5 create JUA330 Manual de usuario

j5 create

j5 create JUA210 Manual de usuario

j5 create

j5 create JUD480 Manual de usuario

j5 create

j5 create JUE220 Manual de usuario

j5 create

j5 create USB VGA Display Adapter Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario

j5 create JUA370 Manual de usuario

Manuales populares de Adaptador de otras marcas