Ivoclar digital PrograPrint PR5 Manual
ivoclardigital.com
PrograPrint PR5
Short Instructions | Instruções de Uso Resumidas |
Guia breve
Table of Contents | Lista de Conteúdo | Índice
4
English
5
English
1 About this document
These Short Instructions are part of the overall documentation for the device. They are only
valid in combination with the Operating Instructions of the device (“Document of equal
applicability and required files”, page 7).
WARNING! Improper use of the device.
Risk to the patient and the user.
The Short Instructions contain important information on the safe handling of the device:
Operating Instructions and Short Instructions must be read thoroughly prior to
installation and operation.
These Short Instructions will help you to quickly familiarize yourself with the use of
PrograPrint PR5.
Should you lose these Short Instructions, you can download them from
www.ivoclarvivadent.com.
1.1 Signs and symbols
1.1.1 Warnings and additional information
Warnings
Warnings are used in these Operating Instructions to warn you of a risk of injury to persons
and/or damage to property.
1. Please always read and observe these warnings.
2. Follow all measures marked with the warning symbol and warning word.
Depending on the severity and probability of the danger, the following warning levels are
distinguished:
Warning
symbol Warning word Danger level
Consequences resulting
from non-observance
DANGER Immediate imminent
danger
Death, severe personal
injury
WARNING Potential danger Death, severe personal
injury
CAUTION Potential danger Slight personal injury
- NOTICE Potential danger Damage to property
English
6
Explanation of the structure of a warning:
WARNING WORD! Name of source of danger, cause of hazard or type of risk.
Consequences of non-compliance with instructions.
Action in order to avoid danger.
Example of a warning:
WARNING! Risk of injury due to heavy lifting.
Injuries to the back due to overloading.
Only lift the device with the aid of the pallet truck.
Unpack the device only after transportation.
Additional information
Symbol Meaning
Additional information, e. g. for better understanding, for simplifying work
flows or for further information.
English
7
1.2 Document of equal applicability and required files
For details on the documents of equal applicability, please contact your local trade partner or
go to the download section of Ivoclar Vivadent at http://www.ivoclarvivadent.com.
In the download area, you can find additional files, such as :
•Installation file for the software “PrograPrint Manager”
•Build styles for the software “CAMbridge”
•DME file for the software “Dental System”
Document Explanation
Operating Instructions
PrograPrint PR5
Comprehensive information on the use of
PrograPrint PR5
Instructions for Use for the
different materials
Information about the use of the materials to be
processed
Operating Instructions for the
cleaning unit PrograPrint Clean
Information about requirements that must be
observed for the transport, set-up and use of
PrograPrint Clean
Operating Instructions for the
post-curing unit PrograPrint Cure
Information about requirements that must be
observed for the transport, set-up and use of
PrograPrint Cure
CAMbridge flow chart Short Instructions for the CAM software
"CAMbridge"
Instructions for Use for
CAMbridge
Manual for the CAM software "CAMbridge"
Short Instructions for:
•PrograPrint PR5
•PrograPrint Clean
•PrograPrint Cure
Excerpt of operation-relevant topics from the
respective Operating Instructions
English
8
2Safety
WARNING! Improper use of the device.
Hazard to the user.
The safety chapter contains important information on the safety of the device: Please read
it thoroughly prior to installation and operation.
The device is built according to state-of-the-art technology and recognized safety regulations.
Nevertheless, operation bears the risk of injury for the user or third parties. Moreover,
impairments to the device and other property are possible.
2.1 Intended use
PrograPrint PR5 has been designed for 3D printing in dental technology using the following
materials:
•ProArt Print Wax (burn-out material for the press and casting technique)
•ProArt Print Model (material for the fabrication of the dental working models)
•ProArt Print Splint (material for the fabrication of dental drilling templates and splints)
Use PrograPrint PR5 exclusively for this purpose.
In the case of damage caused by improper use or failure to observe the Operating Instructions,
all liability and guarantee claims are void.
Please note that only the materials and cleaning agents approved by the manufacturer ensure
processing without damage to the machine.
Only approved materials can be identified by the PrograPrint PR5 by means of the
corresponding RFID code on the material bottle and on the cartridge and used accordingly so
that misapplication is virtually impossible.
All information regarding material and indication extensions corresponds to the state of
knowledge at the time of going to print. For additional details, go to http://
www.ivoclarvivadent.com.
The use of materials from other manufacturers is not recommended due to the lack of
coordination with the printing/fabrication process.
English
9
2.1.1 Potential improper use
The device is not suitable for 3D printing procedures outside of the dental field.
The following is considered as misuse of the system:
•Non-compliance with the specified intended use, intended operator specifications or
intended environment
•Modifications, maintenance and repairs without prior authorization by Ivoclar Vivadent
•Operation with inappropriate parameters
Improper use of the devices can lead to the following:
•Danger for patients and operating personnel
•Impairment of the operability of the devices
Ivoclar Vivadent assumes no liability for damage resulting from improper use.
Typical misapplications of the device to be avoided:
2.1.2 Intended user
The device may only be operated by dental technicians and qualified dental staff for the
fabrication of dental objects for dental applications.
The user is responsible for selecting the correct device settings.
Improper use Consequences
Use of non-approved materials The device cannot execute any printing
orders
Incorrect cleaning and disposal (build
platform, build chamber, hood etc.)
•Skin irritations
•Environmental damage
•Damage to the device
Operation without cartridge or build
platform
Damage to the device
Operation with incorrectly inserted
cartridge or build platform
•Damage to the device
•Deficient printed object
Shut-down of the device by the user during
printing
Deficient printed object
Mixing of different materials •Damage to the patient's health
•Cross-contamination of materials
•Deficient printed object
•Damage to the material, cartridge and
material bottle
English
10
2.1.3 Intended environment
The device is only permitted for use in closed rooms within the specified ambient conditions
(see technical data in the Operating Instructions, “Document of equal applicability and
required files”, page 7) and in compliance with the requirements for safe installation (see
requirements regarding the location site, “Document of equal applicability and required
files”, page 7).
2.2 Operator's obligations
The operator is responsible for the safe operation of the device.
Ensure compliance and control:
a. Intended use
b. Statutory or other safety and accident prevention regulations
Only operate the device in a technically perfect condition, in a proper, safety-conscious
and risk-conscious manner and while observing the Operating Instructions (“Document of
equal applicability and required files”, page 7).
Keep these instructions and all documents of equal applicability complete, legible and
accessible to the personnel at all times.
2.3 Personnel qualifications
Ensure that the personnel assigned to work with the device have read and understood
these instructions and all documents of equal applicability, in particular safety,
maintenance and repair information, before starting to work.
Ensure that personnel is aware of hazards and safety equipment (“Working areas,
potential hazards and safety measures on the device”, page 12).
Manage the responsibilities, competence and monitoring of staff.
All work must only be carried out by qualified technical staff.
Personnel to be trained should only be working with the device under the supervision of
qualified technical staff.
2.4 Staff obligations
Only operate the device in a technically perfect condition, in a proper, safety-conscious
and risk-conscious manner and while observing the Operating Instructions (“Document of
equal applicability and required files”, page 7).
Refrain from any process that could endanger staff or third parties.
In the case of safety-related malfunctions, switch off the device immediately and allow the
fault to be rectified by the person responsible.
In all cases of doubt regarding the safety of the appliance, switch off the appliance and
prevent further use.
In addition to the overall documentation, legal or other safety and accident prevention
regulations including applicable standards and guidelines of the country in which the
device is operated must be complied with.
Do not wear jewellery such as rings, bracelets or watches when working on the appliance,
especially when cleaning the build chamber, to prevent cutting injuries or bruising.
Otros manuales para PrograPrint PR5
1
Tabla de contenidos
Idiomas:
Otros manuales de Equipo de laboratorio de Ivoclar digital
Manuales populares de Equipo de laboratorio de otras marcas
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manual de usuario
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manual de usuario
NI
NI PXI-5422 Manual
Collomix
Collomix Aqix Manual de usuario
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario
Ocean Insight
Ocean Insight FLAME-NIR+ Manual de usuario
