iTrust UH11-0060 Manual de usuario
iTrust Online UPS
UH11 Series-6kVA/10kVA
User Manual
E1-20010916-C-1.0
Avansys Power Co., Ltd.
iTrust Intelligent High Frequency Online UPS
UH11 Series-6kVA/10kVA
User Manual
31010810BOM:
StandardPublication State:
E1-20010916-C-1.0Manual Ver.:
Avansys Power Co., Ltd.. provides customer with satisfactory
technical support. To obtain support, please contact the distributor in
the first instance. When failing to reach the distributor, please contact
your local technical support center or the company headquarters.
Avansys Power Co., Ltd..
Address: Huawei Manufacturing Center, Banxuegang Industrial Base,
Longgang District, Shenzhen 518129, PRC
Homepage http://www.avansys.com
E-mail [email protected]
Copyright Information
Copyright by Avansys Power Co., Ltd.
All rights reserved.
The information in this document is subject to change without notice.
No part of this document may in any form or by any means
(electronic, mechanical, micro-copying, photocopying, recording or
otherwise) be reproduced, stored in a retrieval system or transmitted
without prior written permission from Avansys Power Co., Ltd..
Copyright by Avansys Power Co.,Ltd..
All rights reserved.
The information in this document is subject to change without notice.
No part of this document may in any form or by any means
(electronic, mechanical, micro-copying, photocopying, recording or
otherwise) be reproduced, stored in a retrieval system or transmitted
without prior written permission from Avansys Power Co.,Ltd.
Publication Statement
Thank you for using iTrust series UPS by Avansys Power Co.,
Ltd. UH11 series is the latest single-phase input single-phase
output intelligent online UPS developed by Avansys incorporating
years of experience in power supply development. As a
world-leading standard UPS product, this series delivers
excellent electrical performance, is fully compliant with safety
regulations and EMC standards, features perfect intelligent
monitoring and network management, and is well-shaped with
beautiful appearance.
Please read this manual carefully prior to installation and
operation
Readers
This manual is intended for equipment operator and technical
support personnel.
Conventions
Symbol
Notice This symbol is used in this manual to alert you to
important information.
Safety Guidelines
. Prohibitions
1. As high voltage exists within UPS, no one but Avansys
technician and Avansys-authorized technician should open the
panel and the chassis cover. Otherwise, one may get electric
shock and such situation is not covered under warranty.
2 2. When the UPS is purchased to supply the equipment listed
below, please consult the distributor in advance on the UPS
application, setting, management and maintenance, which need
special consideration and design.
Life support medical apparatus;
Facilities such as lift which may endanger human life;
Mission-critical equipment like above.
3. Never dispose of battery in a fire, as battery may explode
when exposed to flame.
. Matters needing attention
1. The UPS contains its own energy source-battery, the UPS
output may carry live voltage even when the UPS is not
connected to an AC supply.
2. To move or re-wire the UPS, please disconnect the input and
make sure that the UPS is completely shut down. Otherwise, live
voltage still exists at the output terminal, which may cause
electric shock.
3. To ensure human safety, the UPS must be reliably grounded
before use.
4. The operating environment and storage method will affect the
lifetime and reliability of the UPS. Please don’t use the UPS long
in the following environments
Place with temperature and relative humidity outside
specifications (temperature: 0 to 40 , relative humidity: 5% to
95%);
Place with direct sunlight or near heat source;
Place with vibration or shock;
Place with dust, corrosive material, salt or flammable gas.
5. Please keep the air inlet and outlet unblocked. Poor ventilation
will increase the internal temperature, which will shorten the
lifetime of the UPS components, hence that of the UPS.
6. Liquid and other irrelevant substances are strictly prohibited
inside the UPS chassis.
7. In case of fire, please use dry-chemical fire extinguisher. Using
foam fire extinguisher may cause electric shock.
8. High ambient temperature shortens battery lifetime, so battery
should be replaced regularly to ensure normal UPS operation
and adequate backup time. Battery replacement must be
conducted by authorized technician.
9. If the UPS will not be used for long, it should be placed in dry
environment. Storage temperature of standard UPS (with battery):
–20 +55 , storage temperature of long backup time UPS
(without battery): –40 +70 .
10. During the period the UPS is left unused, it is recommended
to supply the UPS with AC mains for more than 12 hours every 3
months, so that the battery will not be damaged due to long time
of not-in-use.
11. Please don’t open or damage the battery, as the electrolyte is
harmful to skin and eye. If tainted with electrolyte, wash it off
immediately with plenty of water and go to hospital for a check.
Contents
243.1.2 Bypass Mode ---------------------------------
23
3.1.1 Normal Mode ----------------------------------
23
3.1 Operation Mode ------------------------------------
23
Chapter 3 Operation -------------------------------------
20
2.3 Wiring of Master/Slave Hot Standby System ---------------
15
2.2.2 Installing the UPS ------------------------------
13
2.2.1 Matters Needing Attention ------------------------
13
2.2 Installation ----------------------------------------
13
2.1 Unpacking Inspection --------------------------------
13
Chapter 2 Installation ------------------------------------
11
1.5.3 Rear Panel -----------------------------------
5
1.5.2 LCD Panel -------------------------------------
4
1.5.1 Appearance ------------------------------------
4
1.5 Appearance and Panels -------------------------------
3
1.4 Features -------------------------------------------
2
1.3 Schematic Diagram -----------------------------------
1
1.2 Model ---------------------------------------------
1
1.1 Application -----------------------------------------
1
Chapter 1 Product Introduction -----------------------------
39
II. Battery Maintenance ----------------------------------
39
I. Fan -----------------------------------------------
39
Chapter 4 Maintenance ----------------------------------
35
3.5 LCD Menu Operation --------------------------------
35
3.4 UPS Monitoring -------------------------------------
34
3.3.4 Output Short-circuit Protection ---------------------
34
3.3.3 Transfer to Bypass Mode in the Event of
Overtemperature ------------------------------------
34
3.3.2 Transfer to Battery Mode in the Event of Mains
Failure -------------------------------------------
33
3.3.1 Transfer to Bypass Mode in the Event of
Overload ------------------------------------------
33
3.3 Auto Transfer Between UPS Operation Modes -------------
33
3.2.6 System Power-off ------------------------------
32
3.2.5 Turn off Inverter --------------------------------
31
3.2.4 Manual Battery Test ----------------------------
28
3.2.3 Start Inverter Output ----------------------------
27
3.2.2 System Parameter Setting ------------------------
26
3.2.1 System Power-on ------------------------------
26
3.2 Operation -----------------------------------------
25
3.1.4 Fault Mode -----------------------------------
24
3.1.3 Battery Mode ----------------------------------
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Manuales populares de Unión Postal Universal de otras marcas
Pylontech
Pylontech Victron & Pylontech US5000 Manual de usuario
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario
Mecer
Mecer ME-1000-WTU Manual de usuario
Mustek
Mustek PowerMust 530(B) Plus Manual de instalación y operación
Emerson
Emerson Liebert NXL series Manual de usuario
MAKELSAN
MAKELSAN BOXER SERIES Manual de usuario
