ISA ZERO TOUCH T5 Manual de usuario
EN
USE AND MAINTENANCE MANUAL 428000729137
1
ZERO TOUCH
ISA S.r.l.
Via del Lavoro, 5
06083 Bastia Umbra - Perugia - Italy
Tel. +39 075 80171 - Fax +39 075 8000900
www.isaitaly.com
T5 T8 T8 OR T12 T16
ZERO TOUCH
2
EN
428000729137 USE AND MAINTENANCE MANUAL
ZERO TOUCH
1. NOTES / IMPORTANT NOTES 4
2. MANUFACTURER 10
3. WARRANTY TERMS AND CONDITIONS 10
4. EQUIPMENT IDENTIFICATION 11
5. USE 12
5.1 COMPOSITION 12
5.2 LOAD / UNLOADING OF PRODUCTS 13
5.3 LOAD OF PRODUCTS 13
5.4 USING THE SPIKE TEMPERATURE PROBE 15
5.5 USE OF THE LAMP UV (OPTIONAL) 16
6. SAFETY 17
6.1 SAFETY DEVICES PRESENT 17
6.2 FIXED PROTECTIONS 17
6.3 ISOLATING THE ELECTRIC POWER SUPPLY 17
6.4 RESIDUAL RISKS 17
6.5 RISKS OF CONTACT WITH LIVE PARTS 17
6.6 FIRE 18
6.7 EXPLOSIVE ATMOSPHERE 18
6.8 SLIPPING 18
6.9 TRIPPING 18
6.10 CIRCUIT FAULTS 18
6.11 WARNING SIGNS (IF ANY) 18
6.12 FALLING OBJECTS 18
6.13 COOLING 19
6.14 FOODSTUFFS SAFETY (PACKAGED PRODUCTS) 19
7. DISPOSAL OF WASTE MATERIAL 20
8. INSTALLATION 21
8.1 STORAGE AND UNPACKING 21
8.2 INSTALLATION - POSITIONING - ENVIRONMENTAL CONDITIONS 21
8.3 ELECTRIC CONNECTION 21
9. MAINTENANCE 22
10. FAULTS - TECHNICAL AFTER-SALES ASSISTANCE 23
10.1 ALARMS LIST (WHERE PRESENT) 24
11. TECHNICAL SPECIFICATIONS 25
11.1 CONTAINERS ARRANGEMENT 26
11.2 KIT SUPPORTS ICE CREAM 27
11.3 INSTALLATION 30
11.4 LOAD LIMITS 30
11.5 POSITIONING / LEVELLING 31
12. CONTROL PANEL 32
13. CLEANING 33
14. PROLONGED APPLIANCE SWITCH-OFF 36
EN
USE AND MAINTENANCE MANUAL 428000729137
3
ZERO TOUCH
The manual contains symbols to attract the reader’s attention and highlight particularly
important aspects. The table below illustrates the meaning of the various symbols used.
Read the instructions manual
Danger: Live electrical parts
Use of protective clothing
Requests for maintenance or operations must
be carried out by qualified staff or technical
after-sales centres.
Attention / Danger
Information
Important information
Operations that must be performed by two
persons.
Visual observation
Condensing unit on board
Notes / Important notes
Remote condensing unit
ATTACHMENT
1 WIRING DIAGRAM - 412100768000 37
2 WIRING DIAGRAM - 412100770100 38
4
EN
428000729137 USE AND MAINTENANCE MANUAL
ZERO TOUCH
The content of this manual is of technical nature and is owned by
ISA.It is forbidden to reproduce, circulate or modify all or part of
its content without written consent. Any infringement will be legally
pursued.
The manual and the conformity certificate are an integral part of the
equipment and should always accompany the product in the event of a
transfer to a new location or to a new owner. The user is responsible for
the integrity of these documents, for their consultation and during the
whole life cycle of the equipment itself. Keep this manual in a safe place.
It should be available for consultation near the equipment at all times.
If lost or destroyed, you can request a copy of the manual from ISA
by specifying the exact model, serial number and year of manufacture.
The manual reflects the manufacturing technology at the time of supply.
The manufacturer reserves the right to modify its products in any way it
deems necessary, with no obligation to update manuals and machines
relating to previous manufacturing batches.
This equipment is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities or by persons
lacking the necessary experience and knowledge, unless they are
supervised by a person responsible for their safety who has instructed
them on how to use the equipment. Children should be supervised to
ensure that they do not play with the equipment. Always refer to this
manual before going ahead with any operation. Before doing any type
of work, disconnect the equipment from the power supply. Any work on
electric and electronic parts or cooling system components should only
be carried out by trained personnel in compliance with current laws.
Always refer to this manual before taking any action. Before attempting
any intervention disconnect the equipment from the power supply. Work
on parts, electronic components or the refrigeration system must be
carried out by qualified personnel, in full compliance with the regulations.
The Manufacturer cannot be held liable for any injury to persons or
animals, or damage to the product itself in the event of:
• Improper use of the equipment or use of the appliance by
unqualified or unauthorised personnel.
• Failure to comply with current legislation.
• Incorrect installation and/or power supply faults.
• Failure to observe the instructions contained in this manual.
• Failure to follow the maintenance programme.
• Unauthorised modifications.
• Installation of non-original spare parts in the equipment.
1. NOTES / IMPORTANT NOTES
EN
USE AND MAINTENANCE MANUAL 428000729137
5
ZERO TOUCH
• Installation and use of the equipment for purposes other than those
for which the appliance was designed and sold.
• Tampering with or damage to the power supply cable.
Liability for applying the safety instructions contained in this manual is
held by the technical personnel responsible for the intended use of the
equipment, who should ensure that authorised personnel:
• Are qualified to carry out the requested activity.
• Are aware of, and carefully comply with, the instructions contained in
this document.
• Are aware of, and apply, the general safety standards applicable to
the equipment.
The buyer is responsible for training personnel using the appliance on
the risks, safety devices and general health and safety rules required
by the laws of the country where the appliance is installed.
Users/operators should be aware of the position of all the controls and
how they work, as well as of the features of the appliance.
They should also read this manual in its entirely.
Maintenance work should be conducted by qualified personnel after the
appliance has been prepared adequately.
Danger
Unauthorised tampering or replacement of one or more parts of the
appliance, use of accessories that modify the use of the same and
use of spare parts different to those recommended, can become the
cause of injury.
Danger
Any work conducted on the on the appliance must involve
disconnection from the power socket and in any case, none of the
protective elements (grid, casing) should be removed by non-
qualified staff. The appliance should not be operated when these
protective elements have been removed.
Note
In order not to compromise functionality and safety of the appliance,
the particularly complex installation and maintenance activities are
not documented in this manual and are performed by specialised ISA
technicians.
1. NOTES / IMPORTANT NOTES
6
EN
428000729137 USE AND MAINTENANCE MANUAL
ZERO TOUCH
Never use electric devices inside this appliance. Do not use mechanical or other
means to accelerate the defrosting process, other than recommended by the
manufacturer. Keep the air vents in the casing of the appliance or in the structure
built into the wall free of obstructions. Do not damage the refrigerant circuit.
RISK OF EXPLOSION
Do not store in the equipment products which contain flammable propellants
and explosives.
R744 - REFRIGERANT (WHERE APPLICABLE)
The refrigerant R744 is a gas that is compatible with the
environment. Pay close attention during transport, installation and
that the destruction not to damage the refrigerant pipelines.
IN THE EVENT OF DAMAGE:
Keep away from the flame or ignition sources. Properly ventilate
the premises for a few minutes. Turn the unit off, pull the plug.
Inform customer support service.
WARNING
The refrigerant system is High Pressure.
Do not tamper with the system, but call a specialised and qualified
technician before disassembly.
ATTENTION
Maintenance must be performed exclusively by qualified staff.
1. NOTES / IMPORTANT NOTES
EN
USE AND MAINTENANCE MANUAL 428000729137
7
ZERO TOUCH
R600a - REFRIGERANT (WHERE APPLICABLE)
The refrigerant R600a is a gas that is compatible with the
environment, but highly flammable.
Pay close attention during transport, installation and that the
destruction not to damage the refrigerant pipelines.
IN THE EVENT OF DAMAGE:
Keep flames or sources of ignition away from the appliance.
Properly ventilate the premises for a few minutes. Turn the unit
off, pull the plug. Inform customer support service. The more
refrigerant containing an appliance, the greater must be the
environment in which there is the unit. In areas too small, in the
event of leakage can form a flammable mixture of air and gas. The
volume of the room where the appliance is installed must
be at least 17 m³ for each cooling system present in the
room.
ATTENTION
Maintenance must be performed by qualified personnel that has
been to work with flammable refrigerants.
R290 - REFRIGERANT (WHERE APPLICABLE)
The refrigerant R290 is a gas that is compatible with the
environment, but highly flammable.
Pay close attention during transport, installation and that the
destruction not to damage the refrigerant pipelines.
IN THE EVENT OF DAMAGE:
Keep flames or sources of ignition away from the appliance.
Properly ventilate the premises for a few minutes. Turn the unit
off, pull the plug. Inform customer support service. The more
refrigerant containing an appliance, the greater must be the
environment in which there is the unit. In areas too small, in the
event of leakage can form a flammable mixture of air and gas. The
volume of the room where the appliance is installed must
be at least 19 m³ for each cooling system present in the
room.
ATTENTION
Maintenance must be performed by qualified personnel that has
been to work with flammable refrigerants.
1. NOTES / IMPORTANT NOTES
8
EN
428000729137 USE AND MAINTENANCE MANUAL
ZERO TOUCH
STAFF TRAINING
The buyer is responsible for ensuring personnel who will use the
appliance and maintenance technical staff are instructed and trained
adequately. The manufacturer is available for advice, clarifications, etc.
so that the operator and technical staff can use the appliance correctly.
To ensure the operator’s safety, appliance devices should be kept in
constant working order. This manual is intended to illustrate the use
and maintenance of the appliance. The operator has a responsibility and
duty to carefully observe the instructions contained within it.
Failure to comply with safety standards may result in injury to personnel
and damage to the equipment components and control unit. The user
can contact the dealer to request additional information not contained
in this document, or suggest improvements, at any time.
Before the product is delivered to the customer, it is essential that
a trained technical member of staff checks that the appliance is
operating correctly in order to achieve maximum performance.
INTRODUCTION
ISA employs materials of the best quality and as they enter the
company, we constantly monitor their storage and the use as part of the
manufacturing process to prevent damage, deterioration and failure.
All manufacturing elements are designed and manufactured in order
to guarantee reliability and high safety standards. All appliances are
subjected to a strict testing procedure before delivery. However, please
bear in mind that product performance over time depends on correct
use and adequate maintenance. This manual contains the necessary
instructions to maintain the appliance’s initial appearance and functions
over time.
The Use and Maintenance manual contains the necessary information
for understanding how the appliance works and how to use it properly,
namely: the technical description of the various operational units,
equipment and safety systems, operations, how to use the instruments
and the interpretation of any diagnostics reports, main procedures and
information relating to routine maintenance. For correct use of the
appliance, the working environment should comply with current health
and safety standards.
1. NOTES / IMPORTANT NOTES
EN
USE AND MAINTENANCE MANUAL 428000729137
9
ZERO TOUCH
The safety requirements, indications, standards and notes illustrated
in the various chapters of the manual are aimed at establishing a
code of conduct and a series of obligations to be observed when
performing the various activities, in order to create safe conditions
for personnel, the equipment and the surrounding environment. The
safety standards reported in this document are intended for trained,
authorised personnel responsible for:
• Transport
• Installation
• Operation
• Management
• Maintenance
• Cleaning
• Putting out of order
• Disposal
Attention
Reading this manual, albeit in full, is no substitute for adequate
user experience. therefore it should only be considered a useful
reminder of the technical features and the main operations to
perform.
Note
The installers and users must read and understand
the instructions contained herein before any
operation on the appliance.
1. NOTES / IMPORTANT NOTES
10
EN
428000729137 USE AND MAINTENANCE MANUAL
ZERO TOUCH
2. MANUFACTURER
ISA S.r.l.
Via del Lavoro, 5
06083 - Bastia Umbra - Perugia - Italy
Tel. +39 075 80171
Fax +39 075 8000900
www.isaitaly.com
3. WARRANTY TERMS AND CONDITIONS
The seller's warranty on the equipment is valid for 12 (TWELVE) months from the date of delivery.
The warranty includes repairs or replacements of any faulty parts due to manufacturing processes or
installation after written communication has been received, stating the appliance serial number and date
of installation.
Not included in the warranty:
• all defects caused by incorrect use of the appliance
• all defects caused by incorrect electrical connection
• all defects caused by normal wear (for instance compressor failure and fluorescent lamp malfunctioning
that is not due to manufacturing defects)
• calls for installation, technical instructions, adjustments and cleaning the condenser
If the seller's technical staff detect any tampering, unauthorised repairs or inappropriate use of appliance
the warranty will be invalidated.
Shipment of components covered by the warranty is freight collect only.
Any damage to the appliance detected at the time of delivery due to transport must be reported on the
same shipping note to claim compensation from the carrier.
The seller cannot be held liable in the event of damage to the preserved product due to appliance failure
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Congelador de ISA
