IrriGreen 2 Manual de usuario
Quick Install Guide
v2 - 11/21
2
With our revolutionary all-digital
sprinkler system, you use fewer, more
efficient heads, that accurately water
to the exact shape of your landscape.
4
Included in Your Box:
Irrigreen 2 WiFi / Cloud Controller
Standard: 16 Digital Zones, 12 Valve Zones
Pro: 32 Digital Zones, 24 Valve Zones
24 VAC Transformer
with 10’ wire (40VA, indoor)
Digital Sprinkler(s)
1 per zone, ~2000 sq. ft.
Controller Cable
50’ with end plug
15” FlexPipe
1” MPT to mainline tee
50’ Sprinkler Cable
Cable Tee with end plug
CableLok
Quick Install Guide
45
Other Items You’ll Need:
1” Mainline PVC
or Poly Pipe
1” Elbows,
connectors, end caps
1” Tees with 1”
female pipe thread
Teflon Tape
Pressure Gauge
+Any other connectors and end caps needed for your yard
PVC Glue Pipe Cutter
Recommended: 6” Valve
Box (one per head)
6
Irrigreen System Requirements:
1 Constant pressure (between 40-80 psi)
2 Good flow (8+ gpm )
3 Clean water
Well Systems: Water Sources with Particulates:
Well Systems require a constant
pressure pump or regulated constant
pressure supply, e.g. with a pressure
regulating valve (PRV) set below the
lowest pump setting.
Any water source with particulates
such as sand and grit, require a 500
Micron water filter (similar to drip
systems).
Quick Install Guide
67
Step 1: Measure Pressure
Click or scan for Step
1 video
Measuring your water pressure will tell you the
maximum distance that your sprinkler head will be
able to spray, and help you determine where to place
your sprinkler head(s).
Step 2: Bucket Test (Flow)
Connect your pressure gauge
to your water spigot.
Pressure: 40-80 psi
Make sure you can fill a 5 gallon
bucket in less than 45 seconds
(8 gallons per minute).
Flow: 8+ gpm
Click or scan for
Step 2 video
8
Step 3: Sprinkler Head Placement
1. Mark where you want to place
your sprinkler heads.
(Exact placement not critical as you can
program the head to the shape of the zone.)
2. Using a tape measure, measure to the farthest corner of each zone to
make sure you have enough watering range to reach every part of the zone.
NOTE: Refer to the psi/distance chart before placing heads. The farthest corner is the
longest distance on the zone.
Click or scan for Step
3 video
• Don’t overlap sprays or zones.
• Place 1 Sprinkler Head per Zone
• Place heads so that they can reach your furthest corners.
Example of two Zones:
Irrigreen
Sprinkler Head
(Zone 2)
Irrigreen
Sprinkler
Head (Zone 1)
22 Ft.
19 Ft.
*Place sprinkler
heads in the
approximate
center of each
zone.
Quick Install Guide
89
For Narrow Zones:
*For narrow zones
(less than 10’ wide):
• Place head along the edge.
• Heads can be programmed
to water in a 180° pattern.
• The 5 ft. minimum throw
distance ensures head has
enough pressure to stay
popped up.
Check minimum throw distance (cannot be less than 5 feet).
NOTE: Heads cannot be programmed to distances less than 5 feet, to keep
the riser from retracting.
Otros manuales para 2
1
Tabla de contenidos
Otros manuales de Sistema de riego de IrriGreen
Manuales populares de Sistema de riego de otras marcas
Hunter
Hunter Institutional Series Manual de usuario
Cellfast
Cellfast 52-305 Manual de usuario
Tyco Fire Product
Tyco Fire Product Star Galaxy SGQR Manual de usuario
Tyco Fire Product
Tyco Fire Product CENTRAL A Manual de usuario
Oral Care Technologies
Oral Care Technologies Hydro Floss Manual de usuario
Reliable
Reliable F1-300 Manual de usuario
