Ironton 66717 Manual de usuario
READ & SAVE THESE INSTRUCTIONS
5-Ton Horizontal Electric Log Splitter
Owner’s Manual
WARNING: Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
precautions may result in serious personal injury.
Item #66717
Page 2 of 19
Thank you very much for choosing an Ironton®product!
For future reference, please complete the owner’s record below:
Serial Number/Lot Date Code: ________________________________
Purchase Date: ____________________________________________
Save the receipt, warranty, and this manual. It is important that you read
the entire manual to become familiar with this product before you begin
using it.
This electric log splitter is designed for certain applications only.
Northern Tool and Equipment is not responsible for issues arising from
modification or improper use of this product such as an application for
which it was not designed. We strongly recommend that this product not
be modified and/or used for any application other than that for which it
was designed.
For technical questions, please call 1-800-222-5381.
Page 3 of 19
Table of Contents
Intended Use..........................................................................................................................................4
Packaging Contents..............................................................................................................................4
Technical Specifications......................................................................................................................4
Important Safety Information...............................................................................................................4
Specific Operation Warnings...............................................................................................................6
Main Parts of Log Splitter.....................................................................................................................8
Before Each Use....................................................................................................................................9
Operating Instructions........................................................................................................................10
After Each Use.....................................................................................................................................13
Maintenance ........................................................................................................................................14
Troubleshooting..................................................................................................................................14
Parts Diagram......................................................................................................................................15
Parts List..............................................................................................................................................16
Replacement Parts..............................................................................................................................17
Limited Warranty.................................................................................................................................18
Page 4 of 19
Intended Use
The Ironton 5-Ton Horizontal Electric Log Splitter was designed for home use. It’s built to operate best
at temperatures between 41º F and 104º F. The surrounding humidity should less than 50% at 104℉
.It should be stored or transported at temperatures between -13º Fand 131º F.
Packaging Contents
•Log Splitter
•Owner’s Manual
•Extra Hardware Bag
Technical Specifications
Property
Specification
Force
5 Tons
Operation
Horizontal
Motor
120 Volt / 15 Amp
Oil Capacity
0.6 Gallon
Tire Size
5 3/4in. Diameter
Log Capacity
20 1/2in. L x 10in. Diameter
Cylinder
16 3/4in. L x 2 1/3in.W
Cycle Time
9 seconds forward/ 5 seconds return
Important Safety Information
⚠WARNING
•Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
•The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
•Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
•Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
•Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
•Industrial or commercial applications must follow OSHA requirements.
Page 5 of 19
⚠WARNING
WORK AREA SAFETY
•Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas
may put you dangerously close to cutting tools and rotating parts.
•Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence
of flammable liquids, gases, or dust. The product can create sparks, which may ignite the
flammable liquids, gases, or dust.
•Do not allow the product to come into contact with an electrical source. The tool is not insulated
and contact will cause electrical shock.
•Keep children and bystanders away from the work area while operating the tool. Do not allow
children to handle the product.
•Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your
work area. Some of these hazards may be hidden from your view and may cause personal injury
and/or property damage if contacted.
⚠WARNING
PERSONAL SAFETY
•Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use
the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of
inattention while operating the tool may result in serious personal injury.
•Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving
parts. Air vents on the tool often cover moving parts and should be avoided.
•Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant safety
goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in
dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems,
and hearing protection when appropriate. This applies to all persons in the work area.
•Do not overreach. Keep proper footing and balance at all times.
⚠CAUTION
LOG SPLITTER USE AND CARE
•Do not force the log splitter. Products are safer and do a better job when used in the manner for
which they are designed. Plan your work, and use the correct product for the job.
•Check for damaged parts before each use. Carefully check that the product will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
product with a damaged part.
•Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with
the power switch is dangerous and must be repaired by an authorized service representative
Page 6 of 19
before using.
•Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
•Store the product when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
•Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
•Keep guards in place and in working order. Never operate the product without the guards in place.
•Do not leave the tool running unattended.
Specific Operation Warnings
⚠WARNING
•Always wear the proper protective equipment including ANSI Z87.1 compliant eye protection, steel
toed boots, and snug fitting gloves without drawstrings or loose cuffs.
•Do not wear loose fitting or dangling clothing.
•Crush Hazard. Keep hands away from wedge, endplate/ram, and partly spit logs.
•Only one person should operate the log splitter. If an assistant is helping to load logs, the operator
should not actuate the controls until the assistant is at least 10 ft away.
•Stay in the designated OPERATOR POSITON while actuating the controls.
•Spit wood in direction of the grain only.
•Hold bark side of logs when loading.
•Operate log splitter on a hard, level surface.
•Never split the logs bigger than the specified log size capacity.
•Never split more than one log at the same time.
•Check logs for and remove nails or other debris before splitting.
•Remove all branches from the log before splitting
•Never put the log vertically onto the log splitter.
•Do not operate the log splitter in rain or wet areas.
Page 7 of 19
Safety and Product Labels
Reference
Description
Quantity
1
General Warning Decal
1
2
Pinch Point Warning Decal
1
3
Air Bleed Warning Decal
1
4
Electric Shock Hazard
1
5
Spec Decal
1
6
Operation Instructions Decal
1
7
Ironton Decal
1
1.
2.
3.
4.
5.
6.
7.
Page 8 of 19
Main Parts of Log Splitter
Part#
Description
Quantity
Part#
Description
Quantity
1
Oil tank
1
10
Pushbutton box
1
2
Log pusher
1
11
Moving wheel
1
3
Work table
1
12
Lift handle
1
4
Wedge
1
13
Hydraulic control
lever
1
5
Lift handle
1
14
Control lever guard
1
6
Support leg
1
15
Bleed screw
1
7
Work table extension with
remaining plate
1
16
Oil drain bolt with
dipstick
8
Switch
1
17
Max pressure
limiting screw
1
9
Motor
1
18
Rubber foot
1
Page 9 of 19
Wiring Diagram Plumbing Diagram
Before Each Use
⚠WARNING
•Always wear the proper protective equipment including ANSI Z87.1 compliant eye protection, steel
toed boots, and snug fitting gloves without drawstrings or loose cuffs.
•Do not wear loose fitting or dangling clothing.
•Check logs for and remove nails or other debris before splitting.
•Remove all branches from the log before splitting.
•Check for any damaged parts before use.
1. Before moving the log splitter, make sure the bleed screw is tightened to avoid oil leaks.
a. Failure to loosen the bleed screw will keep the air in the hydraulic system
compressed after being decompressed. Continuous compression and decompression
will blow out seals on the hydraulic system and cause permanent damage to the log
splitter.
b. Do not adjust the max pressure limiting screw! The maximum pressure limiting screw
is sealed with glue to ensure that the log splitter works under no more than 5 tons of
pressure. The setting was done by qualified mechanics with professional instruments.
Unauthorized resetting will cause the hydraulic pump to fail to output enough splitting
pressure and could result in serious injury as well as damage to the machine.
Page 10 of 19
Operating Instructions
⚠WARNING
•Always wear the proper protective equipment including ANSI Z87.1 compliant eye protection, steel
toed boots, and snug fitting gloves without drawstrings or loose cuffs.
•Do not wear loose fitting or dangling clothing.
•Crush Hazard. Keep hands away from wedge, endplate/ram, and partly spit logs.
•Only one person should operate the log splitter. If an assistant is helping to load logs, the operator
should not actuate the controls until the assistant is at least 10 ft away.
•Stay in the designated OPERATOR POSITON while actuating the controls.
•Spit wood in direction of the grain only.
•Hold bark side of logs when loading.
•Operate log splitter on a hard, level surface.
•Never split the logs bigger than the specified log size capacity.
•Never split more than one log at the same time.
•Never put the log vertically onto the log splitter.
•Do not operate the log splitter in rain or wet areas.
1. This log splitter is equipped with a ZHB Control System, requiring it to be operated with both
hands. The left hand controls the hydraulic control lever while the right hand controls the push
button switch. The log splitter will freeze when either hand is absent. Only after both hands
release the controls, will the log pusher return to the starting position.
Tabla de contenidos
Manuales populares de Partidor de troncos de otras marcas
Scheppach
Scheppach OX 3-1000 Instrucciones de montaje
Swisher
Swisher 21200 Manual de usuario
Elem Garden Technic
Elem Garden Technic FBHT65-22TCH Manual de usuario
Champion Power Equipment
Champion Power Equipment 90720 Manual
Boss Industrial
Boss Industrial ES5T20 Manual de usuario
Villager
Villager LSP 12 T Manual de usuario
