IRay Technology Mars1417XF Manual de usuario

iRay Technology Co. Ltd. 1

Digital Flat Panel Detector

Mars1417XF

User Manual

Before operating, please read this user manual and pay attention to all safety precautions. Please

ensure that user manual is properly maintained so that it can be accessed at any time. Please use

correctly on the basis of full understanding of content.

To Customers

iRay Technology Co. Ltd. 2

To Customers

Congratulations on your purchase of Mars1417XF wireless digital flat panel

(hereinafter referred to as Mars1417XF) which is manufactured by iRay Technology

Co. Ltd. (Hereinafter referred to as iRay).

At iRay, we strive to not only make the world-class product that delivers the best

value to our customers but also offer the highest quality of service and customer

care. Please take time to read user guide in order to utilize product effectively. We

hope you enjoy experience with Mars1417XF.

If you have any questions or suggestions, please feel free to contact us.

About FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference;

(2) This device must accept any interference received, including interference that may cause

undesired operation.

Attention that changes or modification not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Note: This product has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This product generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this product does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

Service Office

Tel: +86 21 50720560

Fax: +86 21 50720561

E-mail: service@iraychina.com

Location: 2F, Building 9, No.590, Ruiqing Rd, Pudong, Shanghai,

China PC: 201201

To Customers

iRay Technology Co. Ltd. 3

About SAR

After the laboratory measurement, the max SAR value is 0.058mW/g for 2.4GWLAN and max

SAR value is 0.277mW/g for 5G WLAN which satisfies the RF exposure requirement.

Notes on usage and management of equipment

1. Read all instruction in user guide before operation. Pay attention to all safety

precautions.

2. Only a physician or a legally certified operator should use this product.

3. The equipment should be maintained in safe and operable condition by

maintenance person.

4. Use only computers and image display monitors complying with IEC 60601-1 or

IEC 60950-1. For details, consult our sales representative or local iRay dealer.

5. Use dedicated cables. Do not use cables other than those supplied with product.

6. Do not open cover of product without authority.

7. Request your sales representative or local iRay dealer to install this product.

Caring for your environment

This symbol indicates that product cannot be disposed of with your residential or

commercial waste.

Recycling iRay Equipment

Please do not dispose of this product with your residential or commercial waste.

Improper handling of this type of waste would produce a negative impact on health

and environment. Some countries or regions, such as European Union, has set up

systems to collect and recycle electrical or electronic waste items. Contact your

local authorities for information about practices established in your region. If

collection systems are not available, call iRay Customer Service for assistance.

Disclaimer

•iRay shall not be liable to any damage, loss, or injury incurred to purchaser

and the third parties as a result of fire, earthquake, any accident, misuse or

abuse of product.

•iRay shall not be liable to any damage, loss, or injury arising from unauthorized

modifications, repairs, or alterations or failure to strictly comply with iRay’s

operation and maintenance instruction.

To Customers

iRay Technology Co. Ltd. 4

•iRay shall not be liable to any damage or loss arising from use of any option or

consumer goods other than those dedicated as Original iRay product.

•It is the responsibilities of users and physicians for maintaining the privacy of

image data and providing medical care service. iRay shall not be responsible

for legality of image processing, reading and storage nor shall it be responsible

for loss of image data for any reason.

•Information regarding specification, components, and appearance of product is

subject to change without prior notice.。

No part of this publication may be reproduced in any form or by any means without

the written permission of iRay. The information included is designed only for use

with Mars1417XF.

Trademarks

The iRay name and iRay logo are registered trademarks of iRay Technology Co.

Ltd.

Symbols and Conventions

The following symbols and conventions are used throughout user guide.

This symbol is used to identify condition under

which improper use of product may cause death or

serious human injury.

This notice is used to identify condition under

which improper use of product may cause minor

human injury.

This notice is used to identify condition under

which improper use of product may cause property

damage.

This is used to indicate a prohibited operation.

This is used to indicate an action that must be

performed.

To Customers

iRay Technology Co. Ltd. 5

This is used to indicate important operation and

restriction.

This is used to indicate operation for reference and

complementary information.

Labels and markings on the equipment

The labels and markings on Mars1417XF product are indicated below:

Marking Description

Caution: please refer to instruction in user manual.

This symbol is used to indicate that equipment has passed

CE testing and it is followed by CE number.

This symbol is used to identify manufacture series number

which is after, below or adjacent to symbol. The series

number of iRay product is usually made of thirteen digits as

shown below:

This symbol is used to indicate name and address of

manufacturer.

This symbol is used to indicate name and address of iRay

authorized representative in European region.

This symbol is used to indicate consultation of user guide for

general information.

Numerical Order

Year

Date

Month

Version

Product Code

A1A2A3A4 C1C2 M DD Y XXX

To Customers

iRay Technology Co. Ltd. 6

Safety Signs: please refer to user guide for safety

instructions.

Safety Signs：Dangerous Voltage.

Stand-by.

Handle with care.

FPD is allowed to withstand 100kg on surface

This symbol is used to indicate operation temperature range.

This symbol is used to indicate storage temperature range.

Non-ionizing radiation

FCC Federal Communications Commission certificate

Package symbol: fragile.

Package symbol: keep away from sunlight.

Package symbol: keep dry.

To Customers

iRay Technology Co. Ltd. 7

Package symbol: this symbol is used to indicate humidity

range.

Package symbol: keep equipment up right.

Package symbol: do not roll package.

Package symbol: this symbol is used to indicate stacking limit

number.

Detector symbol: the device passes IPX4 test

Contents

iRay Technology Co. Ltd. 8

Contents

1Safety Information ......................................................................................................................11

1.1 Safety precautions 11

1.2 Notes for Using 15

2General Description ....................................................................................................................17

2.1 Scope 17

2.2 Model 17

2.3 Characteristic 18

2.4 Intended use 18

2.5 Product Components 18

2.6 Components Description 20

2.6.1 Detector ...............................................................................20

2.6.2 Battery Pack ........................................................................21

2.6.3 Battery Charger ...................................................................22

2.7 Product Specification 23

2.7.1 Detector ...............................................................................23

2.7.2 Battery .................................................................................25

2.7.3 Battery Charger ...................................................................26

2.7.4 SDK Recommended Condition...........................................26

2.7.5 Environment ........................................................................27

3Installation ..................................................................................................................................28

3.1 Detector Install 28

3.1.1 Attach Battery Pack.............................................................28

3.1.2 Booting Up ..........................................................................28

3.1.3 Adapter ................................................................................31

3.2 Software Installation 31

3.3 Detector Installation 31

3.3.1 Configuration of External wireless AP................................32

3.3.2 Wireless configuration of detector (if necessary) ................36

Contents

iRay Technology Co. Ltd. 9

3.3.3 Wireless configuration reset ................................................37

4Operation ....................................................................................................................................40

4.1 Main Operation 40

4.1.1 Software Mode ....................................................................40

4.1.2 AED Mode ..........................................................................42

4.2 Connection Build 44

4.3 Panel Configuration 45

4.4 Correction Template Generation 46

4.4.1 Pre-offset Template Generation...........................................47

4.4.2 Gain Template Generation...................................................48

4.4.3 Defect Template Generation................................................51

4.5 Image Check and upload 53

4.5.1 Local Image Check..............................................................54

4.5.2 Panel Image Upload ............................................................54

4.5.3 Defect Template Check and Modification...........................56

4.6 Correction Template Management 58

4.6.1 Template Synchronization...................................................58

4.6.2 Correction Activation ..........................................................62

4.7 Firmware Update 64

4.8 Short cut 67

4.9 Software 67

4.9.1 Main GUI ............................................................................67

4.9.2 Home Page ..........................................................................68

4.9.3 Acquire Page .......................................................................68

4.9.4 SDK Page............................................................................71

4.9.5 Detector Page ......................................................................72

4.9.6 Calibrate Page .....................................................................77

4.9.7 Local File Page....................................................................77

4.10 IT-network 78

Contents

iRay Technology Co. Ltd. 10

4.10.1 Purpose for IT-network........................................................78

4.10.2 Required characteristics ......................................................78

4.10.3 Required configuration........................................................78

4.10.4 Technical specifications ......................................................78

4.10.5 Intended information flow...................................................79

4.10.6 hazardous situations resulting from failure of the IT-network

4.10.7 Warning ...............................................................................79

4.10.8 Changes to IT-network include: ..........................................80

5Charger Installation.....................................................................................................................81

6Regulatory Information...............................................................................................................82

6.1 Information of Registration 82

6.2 Information of Manufactures 82

6.3 Medical equipment safety standards 82

6.4 Guidance and manufacture’s declaration for EMC 84

6.4.1 EMI Compliance Table........................................................84

6.4.2 EMS Compliance Table.......................................................84

6.5 Radio Frequency Compliance Information 87

6.6 Battery Safety Standards 87

6.7 Product Label 87

7Trouble shooting .........................................................................................................................92

8Product Maintenance ..................................................................................................................93

8.1 Regular inspection and Maintenance 93

8.2 Repairment 93

8.3 Replacement support 93

Tabla de contenidos

Otros manuales de Sensor de seguridad de iRay Technology

iRay Technology

iRay Technology NDT1013LA Manual de usuario

iRay Technology

iRay Technology Mars1717XU-VSI Manual de usuario

iRay Technology

iRay Technology Venu 1012X Manual de uso y cuidado

iRay Technology

iRay Technology Mars1717XF Series Manual de usuario

iRay Technology

iRay Technology Mars1417V Manual de usuario

iRay Technology

iRay Technology Mars1717VS Manual de usuario

iRay Technology

iRay Technology Mars1417X Manual de usuario

iRay Technology

iRay Technology Luna1012X Manual de usuario

iRay Technology

iRay Technology Mars1417VS Manual de usuario

iRay Technology

iRay Technology Mars1717V Manual de usuario

iRay Technology

iRay Technology Luna1012X Manual de usuario

iRay Technology

iRay Technology Mars1417V Manual de usuario

iRay Technology

iRay Technology Mars1717X Manual de usuario

iRay Technology

iRay Technology Mars1717XF Series Manual de usuario

iRay Technology

iRay Technology Mars1717V Manual de usuario

iRay Technology

iRay Technology VENU1012V Manual de usuario

iRay Technology

iRay Technology Mars1717X Manual de usuario

Manuales populares de Sensor de seguridad de otras marcas

THORLABS

THORLABS PDA10JT Manual de usuario

Waeco

Waeco UV-DETECT Manual de usuario

Intermatic

Intermatic IOS-DSIMF Manual de usuario

urmet domus

urmet domus 1083 Manual de usuario

Siemens

Siemens AZL66 Series Manual de usuario

BTI

BTI Profiline Multi Finder Manual de usuario

Challenger

Challenger SL01 Manual de usuario

DMP Electronics

DMP Electronics 1122INT Manual de usuario

Rielta

Rielta Ladoga MK-RK Manual de usuario

Mirion Technologies

Mirion Technologies ACCURAD PRD Manual de usuario

Bosch

Bosch DS835 Manual de usuario

DBI SALA

DBI SALA EZ Stop Manual del operador

Lamptime

Lamptime ST05C Manual de usuario

Ubiquiti

Ubiquiti MFI-MSC Manual de usuario

Subsite

Subsite 910R Instrucciones de instalación

Satel

Satel OPAL Pro Manual de usuario

Aleph

Aleph XC-1XTEU Manual de usuario

Pima

Pima LARIS QUAD Manual de usuario

iRay Technology Mars1417XF Manual de usuario

Manuales populares de Sensor de seguridad de otras marcas