IQAir Cleanroom H13 Manual de usuario

User’s Manual

Cleanroom H13

About This User’s Manual

Congratulations on your purchase of this IQAir® high-performance air cleaning system.Please study this user manual

carefully to familiarize yourself with the special features and functions of your IQAir® system and keep it in a safe

place for future reference.

Read these instructions before using the appliance:

•Do not use this appliance as sole protection against harmful pollutants.

•Do not immerse the appliance in water or other liquids.

•Always disconnect the power from your air cleaner by unplugging the power cable before adding or removing

parts and before cleaning.

•Do not operate this appliance if it has a damaged cord or plug, if the motor fan fails to rotate, if it is not working

properly, if it has been dropped or damaged, or dropped into water.

•If the power cord of this appliance should become damaged, it may be replaced with a similar two-pole cord set,

as is commonly used for computers and similar appliances.

•Only use this appliance for its intended purpose of air cleaning in non-industrial environments.

•Do not use this appliance in areas with very high concentrations of dusts or powder to prevent the danger of dust

explosions.

•Do not use this appliance in explosive areas.

•Do not use attachments or ﬁlters not recommended by IQAir®.

•Do not use outdoors.

•Do not obstruct the air inlet and air outlet of the air cleaner.

•Do not place the appliance on a soft surface such as a bed or other soft furnishings.

•Only use this appliance in an upright position.

•Do not place next to a humidiﬁer.

•Keep the power cord away from heated surfaces.

•Save these instructions for future reference.

Important Safety Instructions

The IQAir® Group reserves the right to change speciﬁcations contained in this document at any time and without prior notice.

and ﬁlters are protected under U.S. patents 6 001145 and 6159 260. Other U.S.,

European and Asian patents pending.

Page

Important Safety Instructions 2

Chapter 1 – Air Cleaning Systems and Indoor Air Quality 4

1. 1 Improving Indoor Air Quality 4

Chapter 2 – Setting Up 5

2. 1 Unpacking 5

2. 2 Choosing a Suitable Location 6

2. 3 Connecting to Power 6

Chapter 3 – The IQAir® System’s Components 7

3. 1 Description of Housing Components 7

3. 2 Description of Removable Components 8

3. 3 How the IQAir® System Works 8

Chapter 4 – Using the Control Panel 9

4. 1 Description of Control Panel 9

4. 1. 1 Description of Control Panel Keys 9

4. 2 Control Panel Locking Function 10

4. 3 Fan Speed and Air Delivery 10

4. 3. 1 Regulating Fan Speed 10

4. 3. 2 Air Exchange Rates in Differently Sized Rooms 11

4. 4 Using the Menu Functions 11

4. 4. 1 Menu Overview 11

4. 4. 2 Filter Life Monitor 12

4. 4. 3 Setting the Auto Timer 13

4. 4. 4 Day of the Week Timer 14

4. 4. 5 Timer ON/OFF Fan Speed Selection 14

4. 4. 6 Timer Information in the Control Panel 15

4. 4. 7 Time & Day Setting 16

4. 4. 8 Filter Life Reset 16

4. 4. 9 Changing Airﬂow Units 17

4. 4. 10 Language Setting 17

4. 4. 11 Current Model Setting 17

Chapter 5 – Using the Remote Control 18

5. 1 Remote Control Functions 18

5. 2 Getting the Best Transmission Results 18

5. 3 Placing Batteries in the Remote Control 19

Chapter 6 – Replacing Filters 19

6. 1 Location of the Filters 19

6. 2 Ordering Replacement Filters 20

6. 3 Opening and Closing the Housing 20

6. 3. 1 Troubleshooting when Closing the Housing 20

6. 4 Replacing the Pre-Filter (Filter 1) 20

6. 5 Replacing the Gas Phase Filter Cartridges

and Post-Filter Sleeves(Filter 2) 21

6. 6 Discarding Used Filters 22

Chapter 7 – Maintenance 22

7. 1 Cleaning the Housing 22

7. 2 Maintenance-Free Fan 22

Chapter 8 – Important Information 23

8. 1 Important Guidelines for the Use of IQAir Systems in

Critical Environments 23

Chapter 9 – IQAir® Accessories (Optional) 24

Tabel of Contents

Chapter 1 – Air Cleaning Systems and Indoor Air Quality

State-of-the-art ﬁltration technology

The IQAir® Cleanroom utilizes advanced HEPA air ﬁltration technologies to deal with particulate air pollutants

typically found in indoor environments.The IQAir® Cleanroom features the following air ﬁltration technologies:

• High-efﬁciency ﬁne dust ﬁltration

• Cleanroom grade HEPA (high-efﬁciency particulate air) ﬁltration for ultra-ﬁne particles

1.1 Improving Indoor Air Quality

Air cleaning can play an important role when it comes to improving indoor air quality. However, it should be noted

that air cleaning should be used in conjunction with pollution source control and ventilation, wherever possible.

Strategy to improve indoor air quality

To tackle any indoor air quality problem, keep the following three-step strategy in mind:

1. Eliminate or reduce the air pollution source as much as possible. Source control is by far the most effective way to

improve indoor air quality, since it sets out to deal with air pollution at the point of origin.

2. Ensure that sufﬁcient fresh air is entering the room from outside. Air cleaners are not a substitution for sufﬁcient

ventilation. They are not able to reverse the conversion of oxygen (O2) into carbon dioxide (CO2), caused by

breathing and combustion processes.

3. Ensure the IQAir® system can clean enough air to cope with your room size.The actual hourly air volume cleaned

by the system should be at least double the air volume of your room.If the rate at which pollutants enter the room

air is high or the indoor air quality requirements are stringent, the hourly air delivery of the system needs to

exceed the room air volume several times.To achieve that level of air turnover, it may be necessary to employ more

than one system.

Air Cleaning Results

Although air cleaners may be advertised and sold to be suitable for use in speciﬁc indoor environments and to deal

with speciﬁc indoor air quality problems, the manufacturer and distributors make no claim as to the speciﬁc air

cleaning results that are achieved under the user’s individual operating conditions.The air quality improvements that

can be realized with the IQAir® system (as with any air cleaner) in indoor environments depends to a signiﬁcant

degree on circumstantial factors, which are out of the control of the manufacturer or distributors. Important factors

which will inﬂuence the air quality improvements that can be achieved in an indoor environment with an air cleaner

include:

•Type of air pollutants present

•Intensity of the pollutant source(s)

•Pollutant concentration

•Size of the indoor environment (room size)

•Operating speed of the unit

•Number of air cleaners placed in the indoor environment

•Saturation state of the ﬁlters in the air cleaner

Consult a qualiﬁed specialist to determine an effective and comprehensive indoor air quality strategy.

IQAir ®

High-Performance

Air Cleaning System

User Manual

Chapter 2 – Setting Up

2.1 Unpacking

To unpack the IQAir® system, open the top of the box and remove the square styrofoam pad which contains all

accessories and product literature. Lay the box on its side, hold the system by the handle and pull it out of the box.

Remove the plastic bag and foam belt. Keep the packaging for future transport and service needs.

Power cord

Certificate of

Performance

IQAir®

Advanced Air Cleaning System

QuickStart Guide

Quick-Start Guide: IQAir HealthPro®Series

Thank you for choosing an IQAir advancedair cleaning system. This quick-start guide will assist

youin getting started with your IQAir in a matter of minutes. Toaccess some of the more advanced

features of your IQAir system,such as the timer programming, please refer to the user manual.

(Werecommend that you familiarize yourself with the safety instructions in the user manual before first use).

YourIQAir HealthPro system is supplied with the following items:

• User Manual

• Certificate of Performance (individually numbered and hand-signed)

•Warranty/Product Registration Card

• IQAirR eferralProgram Card

• PowerCord, Remote Control (incl.batteries), set of 4 casters

1Setting Up YourIQAir System

A) Unpacking

Tounpack your IQAir system, open the top of the box and remove the user manual,cer tificateof

performanceand the styrofoam pad. Lay the box on its side an pull the IQAir out by its top handle.

Place the system in its upright position and remove all packaging materials.The power cable,

remotecontrol, batteries and set of casters are supplied in a seperate carton contained in the box.

B) Installing the casters

Installing the optional casters is not necessary,however, it may facilitate moving the air cleaner

from room to room. Please refer to the leaflet supplied with the casters for installation

instructions.

C) Choosing a suitable location

The IQAir systemshould be positioned as centrally as possible in the room where the clean air is

desired.

D) Connecting the IQAir system to the power supply

Plug the connector-end of the power cable into the base of the IQAir system.Locate a suitable

wall socket and connect the power cable.The IQAir system is now in standby mode ready to be

switched on.

2Using the Electronic Control Panel

A) Switching the IQAir system on and off

To switch the system on or off,simply press the “power” button, locatedon the far lef t of the

controlpanel.

B) Regulatingthe fan speed

Toselec t the desired fan speed,simply press the “arrow”button on the control panel. When the

top speed has been reached,the display will start again at the lowest fan speed.

C) Determiningthe appropriate fan speed

To achievea significant air quality improvement, the IQAir system should be allowed to filter the

room’sair volume at least twice per hour at the selected fan speed. Please referto the Air Exchange

RateChart on this guide to determine how many air changes per hour can be achieved in differently

sizedrooms at the various fan speed settings.

Remote control

including battery

User manual

Chapter 2 – Setting Up

2.2 Choosing a Suitable Location

When choosing a suitable location for the IQAir® system, keep the following considerations in mind:

•Choosing the most suitable room for the system will depend on where you would like the focus of the air cleaning

efforts. Two main considerations are the time you spend in a particular room and the location of the main air

pollution sources. As a general rule, the closer the system is located to the air pollution source, the better the air

cleaning performance in the room.

Although an air cleaning result may be achieved in adjacent rooms, the main air cleaning will take place in the

room where the system is located. For the best air cleaning results in adjacent rooms, make sure that doors to

these rooms are left wide open.

•For best performance, the system should be positioned at least 12 inches (1 foot) away from the nearest vertical

surface, such as a wall or a cupboard. In general, the more centrally the system is positioned, the better the

performance.

•Position the system close to a power outlet and make sure that the power cable is positioned in a way that it does

not present an obstacle that could be tripped over.

•Make sure that the system is positioned in such a way that the control panel is easily accessible.

2.3 Connecting to Power

1. Plug the connector end of the power cord into the recessed power inlet socket on the back of the system.

2. Plug the other end of the power cord into a power outlet or power strip.

Important: The only way to disconnect power completely is to unplug the power cord.

Do not use the IQAir® system when the power cord becomes damaged.The power cord may be replaced with an

approved cord with a two-pole plug.These power cords are commonly used for computers and similar appliances.

min. distance

12”(1 foot)

Control panel should

be easily accessible

Keep power cable

clear of walkways

Power outlet

Power cord plug

(plug type can vary)

Power cord

connector

Power inlet socket

Chapter 3 – The IQAir® System’s Components

3.1 Description of Housing Components

The IQAir® system features a modular tower design in which all important ﬁltration and air moving components are

positioned vertically in-line, i.e. stacked on top of another. Air is drawn into the system at the base, and passes

through several ﬁlter stages to be returned to the room via the diffuser on top of the system.The housing modules

are held together by two locking arms.

•The base, with its arched design, features air intake openings on two sides.

•The Pre-Filter module 1 consists of frame 1 and the particulate Pre-Filter which is ﬁxed inside the frame by four

ﬁlter clamps.

•The fan assembly comprises two housing modules with the centrifugal fan inside.

•The HEPA ﬁlter module consists of frame 2 and the HEPA ﬁlter,which is ﬁxed inside the frame by four ﬁlter clamps.

•The EvenFlow™ diffuser contains omni-directional air outlet openings.

•The handle on top of the diffuser is designed for carrying the IQAir® system.

•The locking arms hold the housing elements together. When opened, the locking arms allow easy access to all

ﬁlters.

Front view Side view

EvenFlow™ diffuser

Pre-Filter

module (1)

Fan assembly

HyperHEPA®

module (3)

Locking arms

Base

Handle

Air intake opening

Air outlet openings

Chapter 3 – The IQAir® System’s Components

Room air is drawn into the

system via two arched open-

ings at the base.

The air is drawn in through a

two-stage high-efﬁciency

pre-ﬁlter that already re-

moves most pollution

particles.

At the heart of the system,

sandwiched between the ﬁl-

ters,is a powerful centrifugal

fan which generates the

airﬂow.

3.2 Description of Removable Components

The IQAir® system features a modular housing design which enables the easy replacement of all ﬁlter elements in a

matter of seconds.The illustration below shows all the removable components. For more details on how to replace

ﬁlters, please refer to Chapter 6 – Replacing Filters.

3.3 How the IQAir® System Works

The air is pushed through

the tightly pleated high-

efﬁciency particulate

HyperHEPA®ﬁlter.

Low turbulence, low velocity

air is returned to the room via

the EvenFlow™ diffuser.

HyperHEPA® ﬁlter

Frame 2

Frame 1

Filter clamps

Front view Side view

Pre-ﬁlter

Chapter 4 – Using the Control Panel

4.1.1 Description of Control Panel Keys

Power Key

The Power key switches the IQAir® system on and off. When the system is switched off, the fan stops to run, but the

system will remain connected to the power supply (standby mode). The standby mode allows for automatic timer

start-up. In the standby mode, the different menu functions can be accessed.

Tip: In a menu window, the Power key also serves as a quick exit key to return to the main display window.

Arrow (▲) Key

When the system is switched on, the ▲key allows the adjustment of the fan speed. In the enter mode, indicated by

the appearance of a black ﬂashing cursor (see“Enter Key” below), the ▲key is used to modify the selected setting in

the display window. Conﬁrmed with the Enter key, the enter mode is automatically terminated. The LCD will then

display the current menu settings for another 15 seconds before reverting to the main window display.

Chapter 4 – Using the Control Panel

The IQAir® system is operated and controlled via the electronic control panel which is located at the top of the front

locking arm.

Several operations can be completed via the electronic control panel:

•Switching the system on and off

•Controlling the fan speed and corresponding air delivery rate

•Checking the remaining ﬁlter life of the individual ﬁlters

•Setting the automatic timer

•Resetting the Filter Life Monitor after replacing a ﬁlter

•Locking the control panel to avoid tampering with the system’s settings

•Choosing the desired display language

4.1 Description of Control Panels

LCD = Liquid

Crystal Display

Power

Key Enter

Key

Arrow

Key

HyperHEPA® Filter Life LED

Pre-Filter Life LED

Timer LED

Fan Speed LEDs

LCD Display

The 2-line LCD displays important information about the system’s settings.

In standby mode, the ﬁrst line shows the current day and time. If the timer is

activated,the programmed start and stop times will be displayed on the second

line.

If the IQAir® system is on,the ﬁrst line displays the current speed setting and the

second line displays the corresponding air delivery rate of the system.

By pressing the Menu key, ten active menu functions may be accessed. These

functions are explained in detail in this chapter.

LED = Light Emitting Diode

Main window: Standby mode

Main window: On mode

Menu window: Filter Life Monitor

▲

Pre-Filter

HyperHEPA

Tabla de contenidos

Otros manuales de Purificador de aire de IQAir

IQAir

IQAir Atem Manual de usuario

IQAir

IQAir HealthPro Compact Manual de usuario

IQAir

IQAir GC series Manual de usuario

IQAir

IQAir GCX series Manual de usuario

IQAir

IQAir Cleanroom H 13 Manual de usuario

IQAir

IQAir CleanZone 3020 series Manual de usuario

IQAir

IQAir CleanZone 3030 series Manual de usuario

IQAir

IQAir Perfect 16 Manual de usuario

IQAir

IQAir Atem Manual de usuario

IQAir

IQAir HyperHEPA Allergen 100 Manual de usuario

IQAir

IQAir Klaus Series Manual de usuario

IQAir

IQAir HealthPro Compact Manual de usuario

IQAir

IQAir GC series Manual de usuario

IQAir

IQAir HealthPro Compact Plus Manual de usuario

IQAir

IQAir Perfect 16 ID-Series Manual de usuario

IQAir

IQAir Atem Manual de usuario

IQAir

IQAir Dental series Manual de usuario

IQAir

IQAir HealthPro Compact Manual de usuario

IQAir

IQAir Perfect 16 ID-Series Manual de usuario

IQAir

IQAir HealthPro Plus Manual de usuario

IQAir

IQAir HealthPro series Manual de usuario

IQAir

IQAir HealthPro series Manual de usuario

IQAir

IQAir HealthPro 150 Manual de usuario

IQAir

IQAir Atem X Manual de usuario

Manuales populares de Purificador de aire de otras marcas

IKEA

IKEA UPPÅTVIND Manual de usuario

Nash

Nash AP-1 PureSmart Manual de usuario

LG PH-U450 Series Manual de usuario

DeLonghi

DeLonghi DDSX 220WFA Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manual de usuario

Sharp

Sharp FU-40SE Manual de usuario

Philips

Philips AC2721 Manual de usuario

Hitachi

Hitachi EP-A3000 Manual de usuario

TruSens

TruSens Z-2000 Manual de usuario

Motorola

Motorola MBP87SN Manual de usuario

Beko

Beko ATP 7100I Manual de usuario

Carrier

Carrier INFINITY 1620 Manual de usuario

AtmosAir

AtmosAir P2002 Manual de usuario

Winix

Winix NK300 Manual de usuario

Friedrich

Friedrich C-90A Instrucciones de funcionamiento e instalación

Surgically Clean Air

Surgically Clean Air JADE2.0 Manual de usuario

Base aire

Base aire 555 Pro Manual de usuario

Champion

Champion CP25 Manual de usuario