ipTime NAS 2 Manual de usuario
According to this document,
check the contents in the box. (This Guide)
Box Contents
Access shared folders of NAS using PCs or smart-phones
through internet or local network.
Using NAS
Login the web console management system and using it.
User’
Install the utility software package
and setup the NAS system using the system setup wizard.
Installation Guide
Box Contents
Thank you for buying ipTIME
Thank you for buying ipTIME
NAS
NASⅡ
!!!
!!!
All specifications and figures are subject to change without notice.
s Guide for Web console
< LAN cable, 2m >< NAS system >
※ The box contents below are only for reference.
< Software CD > < Manuals >
< USB cable > < Screw x 8 >
< DC Adapter >
Thank you for buying ipTIME NAS
Thank you for buying ipTIME NASⅡ
!!!
!!!
The utility software for NAS
The utility software for NASⅡ
can be run on
can be run on
Windows 2000, XP, Vista and Windows 7 OS environment.
Windows 2000, XP, Vista and Windows 7 OS environment.
In other OS like Mac OS or Linux, installation can be done using web browser manually.
In other OS like Mac OS or Linux, installation can be done using web browser manually.
According to this document,
check the contents in the box.
Box Contents
Access shared folders of NAS
using PCs or smart-phones
through internet or local network.
Using NAS
User’
Install the utility software package
and setup the NAS system
using the system setup wizard. (This Guide)
Installation Guide
Installation Guide
s Guide for Web console
Login the web console management system
and using it.
All specifications and figures are subject to change without notice.
Installing the HDD
One.
Install HDD as the pictures below.
- The other HDD can be installed as the same way.
1Open the front panel.
4Insert the HDD into the tray. Lock the HDD with screws.
2Unlock the screws from the tray. 3
6
5
Pull out the tray.
NAS
I
I
I
I
NAS
I
I
NAS
I
I
NAS
I
I
I
I
Plug the tray to the system.
NAS
I
I
II
Lock the screw to the tray.
7Close the front panel.
8 9 Done.
Connect cables as numbered as pictures below.
Use ipTIME IP router with firmware higher than 7.40 when connect NAS to network.
<ipTIME NASⅡ>
<ipTIME IP router>
NAS
I
I
I
I
Click Power button on the rear panel of NAS and check the LEDs as above.
Connecting cables
Two.
Installing Utility Software
Three.
3
Some Stages are omitted.
Start Installation
Click [Next]
to start the installation.
Click [Finish]
when the installation is finished.
12
Insert CD Install the Utility
4Finish Installation
Click [ipTIME NAS Utility Install] when
the CD launcher program is started.
The utility software for NASⅡ can
be run on Windows 2000, XP, Vista
and Windows 7 OS environment.
In other OS like Mac OS or Linux,
installation can be done using
web browser manually.
Configuring the NAS
Four. Some of the configuration stages are omitted.
1Run ipTIME NAS console
Double Click [ipTIME NAS console]
in the Desktop screen.
2Select NAS
Choose NAS from searching list.
Choose [Open NAS Web Console].
Click [Run] button.
4Run System Wizard
Check [Run System Wizard].
Click [Run] to start the wizard.
3Login
a
bc
a
b
Login to the selected NAS
as a
※ The default password for admin is
“admin” account.
‘admin’.
5Start System Wizard
Click [Next] button to begin the wizard.
6Enter the hostname
Enter the hostname wanted
and click [Next] button.
7Change the
default password for admin
Change the password for admin
and click [Next] button.
8Add a new administrator
9Initialize and Format Disk
Choose Yes or No for initialize & Format Hard Disk
and click [Next] button.
※ Formatting is not needed
if the disk is already formatted.
Creating default folders for service
Activate the shared folders
for Windows and FTP
Turn on the FTP and Window service
and click [Next] button.
11 Register ipDISK service
Select [New Registration] for ipDISK service
and click [Next] button.
12
13 Configure ipDISK service
Fill Service ID and E-mail.
Select ipDISK(FTP) port as an Auto.
※ To select ipDISK port as an Auto,
use ipTIME IP router with firmware higher than 7.40.
14 Finish the configuration
Review the configurations
and click [Next] button to finish.
Choose Yes or No for adding a new administrator account
and click [Next] button.
※ Adding a new administrator account can be done later,
Choose
“No”
and continue the wizard.
Be sure the default folders
for service will be created.
“Data”
and
“Media”
Management
with Web Console
Appendix.
The configuration done by system wizard can be reviewed by the web console.
※
Click [ipTIME NAS Console] icon to login to the web console.
※
Adding a user, creating a folder and other jobs can be done in the web console.
※
Refer
“User’
s Guide for Web Console Management”
for more detail information.
Thank you for buying ipTIME NAS
Thank you for buying ipTIME NASⅡ
!!!
!!!
The utility software for NAS
The utility software for NASⅡ
can be run on Windows 2000, XP, Vista
can be run on Windows 2000, XP, Vista
and windows 7 OS environment. In the smart-phone environment
and windows 7 OS environment. In the smart-phone environment
ipTIME NAS
ipTIME NASⅡ
can be easily accessed using smart-phone apps also available.
can be easily accessed using smart-phone apps also available.
According to this document,
check the contents in the box.
Box Contents
Access shared folders of NAS
using PCs or smart-phones
through internet or local network. (This Guide)
Using NAS
User’
Install the utility software package
and setup the NAS system
using the system setup wizard.
Installation Guide
Using NAS
s Guide for Web console
Login the web console management system
and using it.
All specifications and figures are subject to change without notice.
- This guide contains topics as below.
- Please choose the topic about the service wanted to be used.
Contents.
It explains how to use NAS in windows file sharing environment.
This is the most frequently used method of using NAS in local network.
Windows File Sharing with NAS
Two.
It explains how to use ipDISK service based on FTP and DDNS
to access NAS folders. ipDISK is used to access NAS folder outside
of local network through the internet.
ipDISK service
Three.
It explains how to use NAS browser within the local network.
The NAS browser is embedded in its web console and can access
all the files and folders in NAS. The functions of NAS brower are Copying,
removing, renaming and also PC transferring including open URL.
NAS Browser in Web Console (In local network)
Four.
It explains how to use NAS browser through the internet.
The NAS browser is embedded in its web console and can access
all the files and folders in NAS. The functions of NAS brower are Copying,
removing, renaming and also PC transferring including open URL.
NAS Browser in Web Console (Through the internet)
Five.
It explains how to access NAS folders with existing web browser
like the explorer or safari.
URL service
Six.
It explains how to getting the public URL string for the file stored in NAS.
Once a file is assigned through the public URL string,
it can be accessed from anywhere through internet.
Using Public URL
Seven.
It explains how to use NAS folders with smart-phone APP, ipDISK.
Smart-phone ipDISK service
Eight.
It explains how to use Power button, Reset/USB button & LEDs.
LEDs & Buttons
One.
LEDs & Buttons
This system has 2 buttons and 7 LEDs.
One.
Ready LED
Ready LED shows the status of NAS Services.
On - All NAS services are available.
Slow blinking - Booting or shutting down.(All NAS services are unavailable.)
Fast blinking - Running factory default.
Off - Booting or HDD Power Save Mode.
Gigabit LED
Gigabit LED shows the gigabit ability of LAN Port Link
On - The link of LAN port is Gigabit Speed.
Off - The link of LAN port is not Gigabit Speed.
HDD LED
HDD LED shows the status of internal HDD.
On - NAS recognized the internal HDD.
Blinking - Internal HDD is being accessed.
Off - NAS can't recognized the internal HDD or HDD Power Save Mode.
USB LED
USB LED shows the status of USB MEMORY port.
On - USB storage device is connected and ready to use.
Fast blinking
- Wait USB Copy event for 10 seconds.
- To run USB Copy, push the button.
Slow blinking - Now USB copy action is running.
Off - No USB device is connected.
LAN LED
LAN LED shows the link status of LAN port.
On - The link of LAN port is on.
Off - The link of LAN port is off.
Power button
It is for system power on/off.
Power LED
It show the status of NAS power.
On - Power On.
Off - Power Off.
Reset/USB Copy button
To make system with factory default configuration,
1. Keep this button pushed for more than 5 seconds.
2. Ready LED shows fast blinking.
3. After factory default is done, NAS will be restarted.
To run USB Copy operation,
1. Connect USB storage device.
2. USB LED will show fast blinking.
3. During fast blinking, push this button.
4. Predefined USB Copy operation will be started.
5. During USB Copy operation, USB LED shows slow blinking.
NAS
I
I
I
I
Tabla de contenidos
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario