iPollo V1 mini Classic Series Guía del usuario
V1 mini Classic Series
Server Setup Manual
iPollo
V1 mini series server instruction manual
- 2 -
V1 mini Classic Series have 4 models：
（1）iPollo V1 mini Classic；
（2）iPollo V1 mini Classic WiFi；
（3）iPollo V1 mini Classic Plus；
（4）iPollo V1 mini Classic Plus WiFi。
During use, only the network settings are different, and the versions are
divided into WiFi version and wired connection version.
V1 mini series server instruction manual
- 3 -
I. V1 mini Classic WiFi: Check Before Use
1. Sign For Inspection
(1) When signing for the new server, please check whether the appearance of the package is damaged.
If there is any damage, please take a picture and contact our after-sales service.
(2) After opening the package, please check whether the server case is deformed, whether the fan and
connecting cable are damaged, and whether the cable is damaged. If there is any damage, please
take a picture and contact our after-sales service.
(3) Please check whether there is any abnormal sound on the server. If there is any abnormal sound,
please contact our after-sales service.
2. After-sales contact information
(1) Official Website: www.ipollo.com
(2) Official Wechat Account：iPollo
(3) Facebook：@iPolloGlobal
(4) Twitter：@iPolloGlobal
(5) E-mail：su[email protected]
3. Notes
(1) Recommended ambient temperature range: 10℃-25℃.
(2) The hashrate is subject to the 24-hour hashrate of the Mining Pool.
V1 mini series server instruction manual
- 4 -
(3) Pay attention to dust and foreign matter, so as not to corrode the computing board or affect the heat
dissipation of the server.
(4) It is recommended to use Google browser or Firefox browser to browse the server background.
(5) It is strictly forbidden to plug and unplug the power cable and signal cable under power. The AC
side of the power supply of the server must be reliably grounded.
II. V1 mini Classic WiFi: Product Introduction
1. Main Components
(1) “1”: WiFi signal receiver
(2) “2”: power cable
(3) “3”: V1 mini Classic WiFi
(4) “4”: power adapter（the pictures are for reference only, please refer to actual products.）
2. Interface Introduction
V1 mini series server instruction manual
- 5 -
Fault
The fault warning light. In most cases, when this light flash, it indicates that a
fault has occurred
Normal
Running indicator light. In most cases, when this light is on, it indicates that the
machine is working normally
Reset
Server factory reset button
IP Report
Use the show IP software to feed back the IP of this server to the computer
TF card
SD card slot
Power
Power interface
ANT
WIFI antenna
V1 mini series server instruction manual
- 6 -
ETH
Network interface
3. Notes
(1) In the process of running the server, please place it as shown in the picture below, that is, keep it flat
to avoid any damage to the server.
(2) The socket shall be installed near the server and shall be easily accessible.
(3) The two 6PIN power ports must be connected at the same time before the supplying power.
(4) This product requires a power input of 100~240VAC to make the product work normally. When the
server is powered off, the power switch must be turned off first.
(5) For your safety, it is forbidden to remove any screws on the server.
(6) Do not press the metal buttons on the casing.
III.V1 mini Classic WiFi: Use and Configuration
1. Server Connection
(1) Power Connection
The V1 mini Classic WiFi dedicated power supply has two 6PIN DC outputs, and the input of the power
supply is 100~240VAC. The server can work normally after confirming that the connection is good.
V1 mini series server instruction manual
- 7 -
(2) Internet Connection
(2-1) Wired Connection
The interface marked “ETH” on the server interface panel is the network cable interface. Pay
attention to the direction when inserting the cable. Please insert the crystal head in place. After
inserting it in place, you will usually hear a light “click” sound.
(2-2) WiFi Connection
The red box in the picture is the WiFi antenna ,WiFi signal can be connected, For details, please visit
“ipollo.com/support”.
V1 mini series server instruction manual
- 8 -
2. Log in to the Server
2.1 Find the server IP
After the server is powered on and connected to the Internet, it starts to start. After the server’s normal
starts to light up, you can find the IP of the server. You can use the “show IP” software to find the server
IP as follows:
(1) Download software: http://www.nano.cn/download/ShowIP.exe
(2) Double-click “show IP” to open the software.
(3) Short press the “IP Report” button on the server for 1 second and release it.
(4) The server IP information is fed back on the PC, as shown below:
Note: The server and PC must be in the same network segment, otherwise the IP information
returned by the server cannot be received.
V1 mini series server instruction manual
- 9 -
2.2 Enter the Server Backstage Management System
(1) After finding the IP of the server, enter the obtained IP address in the browser (Google is
recommended), press Enter to enter the server login interface, and enter the default administrator
account and password: root
(2) press “Login” to enter the Server Backstage Management System as follows:
3. Server Settings
Click the "Miner Configuration" interface of "Configuration" to set the "Mining Pool" and
"Network"
V1 mini series server instruction manual
- 10 -
3.1Fill in the Mining Pool Information
Note: This manual takes the “antpool” as an example.
ETC mining address: stratum+tcp:// 47.108.153.82:8008
（1）Select "Pool Configuration" and fill in the Mining Pool Information
(1-1) The "Url" in "Mining Pool 1" is filled with the ETC AntPool mining link address: stratum+tcp://
47.108.153.82:8008
(1-2) "Worker" in "Pool 1" fill in "ipollomini.001"; "ipollomini" is a custom "sub-account" in the
corresponding Mining Pool account; the number suffixed with ".001" is the number used to distinguish
the server;).
Note: For customization such as numbers or letter combinations, use English periods to separate them,
only modify the corresponding characters, and do not increase or decrease spaces and punctuation)
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
