iPECS LIP-8012D Manual de usuario
STG
2
LIP Keyset User Operation
The following is provided as quick reference for commonly used features/functions. Complete instructions
are included in the User Guide.
Placing a Call:
ICM Line –
•Lift handset or press SPEAKER button.
•Dial the extension number from the keypad.
CO Line –
•Lift handset or press SPEAKER button.
•Press CO/IP line, or dial access number.
•Dial desired phone number.
Using Camp-On:
•When calling a busy Station, press *.
•Wait for party to answer.
To retry a busy external number until answered:
•When placing an outgoing call to a busy party, use the Navigation button to display the next menu, and
press the ACNR Soft button.
•Hang-up handset; the call will be completed when busy party returns to idle state.
Delete ACNR:
•Press the STOP Soft button.
Answering a Call while idle:
ICM Line –
•Lift handset, or if in HF mode, just speak.
CO Line –
•Lift handset, and press flashing Flex button (as needed).
•MUTE - (toggle) press to stop sound on a call.
•VOL ST– press to adjust sound on a call.
Answering a Call while busy:
•Press the Hold/Save button.
•Press the flashing CO button.
STG
3
Using Do Not Disturb (DND):
•Press the DND button (toggles ON and OFF).
Pickup a Call to another Station:
•Lift handset.
•Dial 7 (Directed Call Pick-up Code).
•Dial the intercom number of the ringing station.
Pickup a Call from another Station in your Group:
•Lift the handset.
•Dial 566 (Group Call Pickup code)
Conference:
•Place first call.
•Press Conf. Soft button.
•Place second call.
•Press Conf. Soft button twice.
Call Hold:
•Press the HOLD/SAVE button while on a call or conference.
•Press the flashing CO button or Loop button to rejoin call, or Conf. Soft button to rejoin Conf.
Call Forward:
•Lift handset.
•Press FWD soft button.
•Dial the type of forward code (0-5).
1=Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer, 5=Incoming CO Offnet (Attendant only),
0=remote
•For Forward code 1-4, dial destination number.
•For Forward code 5, press CO/CO-Group button, and dial Speed number.
•For Forward code 0, dial password of forwarded station and enter the Forward code (1-4).
1=Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer.
- Dial the destination number.
STG
4
Delete Call Forward:
•Lift handset.
•Press the FWD soft button.
•Dial #.
Call Transfer:
•While on an active call, press the TRANS/PGM button.
•Place call to the transfer destination.
•Remain on the line to announce the call and/or hang-up to complete the transfer.
Using Call Log:
•Press LOG soft button to access Call History.
•Press Navigation STbutton to select a listing.
•Press Send to place a call to that party.
Save Caller information to Directory:
•Press LOG soft button to access Call History.
•Press Navigation STbutton to select a listing.
•Press Select Soft button, and Save Soft button to add that party’s information to the directory.
Change Phone Profile:
•Press MENU button.
•Dial 4, and enter password.
•Dial # (toggles between Profile #1 and #2).
Adjust LCD Contrast:
•While idle, press the VOL STbuttons to change the screen contrast (brightness level).
Change LCD Font:
•Press MENU button.
•Dial 18 (Dual Font Code).
•Press the Navigation STbuttons to select.
•Press the OK Soft button.
STG
5
Bluetooth:
Refer to User Guide for full instructions on registering and pairing Bluetooth devices (for use with LIP-
8024D, and LIP-8040L)
•Press PGM button.
•Dial * 9 (Bluetooth Enable/Disable Code).
•Dial 1 (ON) or 0 (OFF).
•Press HOLD/SAVE.
Menu Program Codes
Code Function
11 Station Name Program
12 ICM Ring
13 CO Ring
14 Password Program
15 Language Program
16 STA Ring Download
17 Back Light
18 Font Program
21 Create Conference Room
22 Delete Conference Room
31 Send Message
32 Inbox
4 Network Configuration
0 Attendant
STG
6
Flex Button Program
•Press the TRANS/PGM button.
•Press the flexible button to be programmed.
•Press TRANS/PGM button and User Program Code (refer to table).
•Press the HOLD/SAVE button.
User Program Codes
Code Function Remark
10 Enblock Mode Dialing
11 Intercom Ring Select Ring Tone 1-8
12 CO/IP Ring Select Ring Tone 1-8
13 Intercom Answer Mode Select ICM Signal mode, 1:HF, 2:Tone, 3:Privacy
14 Call Coverage Attribute Setting 1:ON/OFF, 2:Ring Delay (0-9)
15 Station Ring Download Ring Tone 0-9
19 Ear & Mic Headset
21 Knock Down STA COS SLT
22 Restore Station COS Requires Auth Code
23 Walking COS May require Auth Code
30 VM Mobile Notify
31 Station Wait Retrieve SLT
32 CLI/IP Message Wait Retrieve SLT
33 Authorization Code (Password) Entry Input up to 12 digits
34 DID Call Wait Button
35 Message Wait in Exec/Sec Pair
36 Send SMS Message
37 Register Mobile Ext.
38 Activate Mobile Ext.
39 Register Mobile Ext. CLI
41 Set Wake Up Time SLT; Input time, 24-hr clock
42 Erase Wake-Up Time SLT
- continued on back panel -
STG
7
User Program Codes (cont.)
Code Function Remark
51 Custom/Pre-defined Message Display SLT; Select Message 00-20
52 Register Custom Message (Message 00) Input up to 24 characters
53 Create Conf. Room
54 Delete Conf. Room
55 Monitor Conf-Group
61 Headset/Speakerphone
62 Headset Ring Mode 1:Speakerphone, 2:Headset, 3:Both
71 LCD Display Mode
72 Version Display
73 Background Music
74 Station Name Reg. SLT; Input up to 7 characters
75 Display Phone IP Address
76 Change Phone IP Address
77 Display Phone MAC IP Address
78 Change Mode
79 Display Phone Version
80 RECORD Button Requires VSF/External SMDI VM
84 Account Code Button
85 LOOP Button
86 ATD Intrusion Button
87 ICM Button
88 Camp-On Button
89 Keypad Facility Button
91 CONF Button
94 FLASH Button
95 MUTE Button
96 MONITOR Button
97 REDIAL Button
98 FWD Button
99 PTT Button
9* xx In-Room Indication Button (xx : 01~10)
*0 Hot Desk Login Code
** Hot Desk Logout Code
*7 Force Fwd to Dest.
*8 Register Bluetooth
*9 Bluetooth Usage
Otros manuales para LIP-8012D
2
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Idiomas:
Otros manuales de Teléfono de iPECS
iPECS
iPECS LDP-7000 Series Manual de usuario
iPECS
iPECS LIP-7004N Manual de usuario
iPECS
iPECS LIP-7016D Manual de usuario
iPECS
iPECS LDP-9200 series Manual de usuario
iPECS
iPECS WIT-400HE Manual de usuario
iPECS
iPECS LDP-9030D Manual de usuario
iPECS
iPECS LIP-8004D Manual de servicio
iPECS
iPECS LIP-7004N Manual de usuario
iPECS
iPECS LIP-8012D Manual de usuario
iPECS
iPECS LIP-8004D Manual de usuario
iPECS
iPECS LIP-8012E Manual de usuario
iPECS
iPECS LDP-9030D Manual de usuario
iPECS
iPECS iPECS 7016D Manual de usuario
iPECS
iPECS LIP-8004D Manual de usuario
iPECS
iPECS 9010 Manual de usuario
iPECS
iPECS LIP-8008E Manual de usuario
iPECS
iPECS LIP-9071 Manual de usuario
iPECS
iPECS LDP-9240D Hoja de especificaciones
iPECS
iPECS LIP-9010 Manual de usuario
iPECS
iPECS LDP-9008D Manual de usuario
