iOptron SMARTSTAR CUBEPROTM 8200 Hoja de especificaciones
iOptronCorp.|6FGillStreet|Woburn,MA01801USA|(781)935‐2800|TollFree(866)399‐4587|www.iOptron.com
SmartStar®CubePro™GOTOAltAzMountwithGPS
#8200
FEATURES
•Alt‐AzimuthMount–TheCube™‐‐Theonlymountofitskindforultimaterotation
•IncludestheGoToNovaTMController.Themostintuitivecontrolleronthemarket.
•130,000objectdatabasewith256user‐definedobjects
•ThelargestLCDscreenonthemarketwith8linesand21‐characterHandControlwithbacklit
LEDbuttons.
•USBPortforPCLaptopcontrolandfirmwareupgrades(ASCOMprotocol)
•Metalworm&gearforincreasedstability&performance
•Drivemotorwith9‐speedsettingforprecisetracking
•Dual‐axisServomotor
•Standard‐equipmentACadaptor(OptionalDCadaptoravailable)
•1‐inchfullheighttripodwithmetalhinges
•Built‐in32‐ChannelGPS
•12lb.payload
PACKAGECONTENTS
•TelescopeMount(withbuilt‐inGPS)
•ACAdaptorwithcord
•#8401HandController
•ControllerCable
•Tripod
•Tripodbolt(withblackshaft)andTrayLock
•TripodTray
•1.5kgCounterweight
ONLINECONTENTS(clickunder“Support”menu)www.iOptron.com
•Manuals(youwillneedtorefertothemanualfordetailsonset‐upandoperation).
•Tipsforsetup
•Handcontrollerfirmwareupgrades(checkonlineforlatestversion)
•Reviewsandfeedbackfromothercustomers
iOptronCorp.|6FGillStreet|Woburn,MA01801USA|(781)935‐2800|TollFree(866)399‐4587|www.iOptron.com
QuickSet‐up
Note:Thisisabriefoutlineforgettingstarted.Pleaserefertothefullmanualatwww.iOptron.comfor
details.
Step 1.
Extend tripod legs to full extension.
Step 2.
Attach mount to tripod using the long bolt (#7). Slide
tray on bottom of shaft. Then screw on round black
knob (#9).
Step 3.
Attach telescope to mount using dovetail lock (#2).
Step 4.
Set telescope to PARK POSITION. (1) Position the
mount so that the “S” is facing south. (2) The telescope
tube should be pointed directly up at the zenith. If it is
not perfectly straight then loosen the altitude lock (#4)
to adjust telescope.
Step 5.
Level the mount using the bubble on side of mount by
adjusting tripod legs. It is also suggested to use
additional levels to assure very precise level.
1)South
2)Up
iOptronCorp.|6FGillStreet|Woburn,MA01801USA|(781)935‐2800|TollFree(866)399‐4587|www.iOptron.com
Step 6.
Plug in power plug and hand controller.
Step 7.
Turn on and wait for controller lights to come on. (For
GPS signal wait for controller to say “G_OK”—not
“G_ON”).
GPS provides Latitude, Longitude, and current time
only.
Step 8.
Go to:
Set up controller. Press ENTER.
Step 9.
Go to:
Set up Local Time. Press ENTER.
Enter date and day-light savings (Y-yes. N-no).
Then press ENTER
(Note: use numbered keypad to change numbers)
Step 10.
Go to:
Set Up Site. Press ENTER.
Enter time zone: (add or subtract 60 minutes per time zone)
Enter minutes “behind” UT or “ahead” of UT
•New York City is 300 minutes “behind” UT
•Los Angeles is 480 minutes “behind” UT
•Rome is 60 minutes “ahead” of UT
•Sydney is 600 minutes “ahead” of UT
iOptronCorp.|6FGillStreet|Woburn,MA01801USA|(781)935‐2800|TollFree(866)399‐4587|www.iOptron.com
Step 11. Select and Slew to an object
The mount is now ready to GOTO and track objects.
Go to: Menu>Select and Slew
Press ENTER.
Step 12.
Select a category (ex. “planets, sun, moon”). Then
select an object (ex. “moon”). Then press ENTER.
The telescope will automatically slew to the object and
lock on. It will automatically begin to track once it locks
on to the object.
Step 13. Sync to Target (Use this to center and
synchronize the object from Step 12 into the memory).
Go to: MENU>Sync. To Target. Press ENTER. Next
use the arrow keys to slew to the object until it is
centered in your eyepiece. Then press ENTER again
on the hand controller.
To slew to other objects repeat steps 11 and 12. You
do not need to repeat step 13 except for adjustments.
(Refer to the online manual for 1-star and 2-star alignments. Sync to
Target is the same as 1-star Alignment except that you choose the
object to align to.)
AssemblyTerms
*ToinstallcounterweightremoveAltitudeLock(#4).Screwbarontothreads.Thenplacecounterweightontoendofbar.Secure
thecounterweightbytighteningdownwithscrew.
1. Telescope tube
2. Dovetail lock
3. Hand held controller
4. Altitude lock
5. Mount
6. Tripod
7. Inner support /Tripod bolt.
8. Tray
9. Tray lock
10. Counterweight (not shown)*
Este manual sirve para los siguientes modelos
1
Otros manuales de Telescopio de iOptron
iOptron
iOptron SmartStar-E 8500 Manual de usuario
iOptron
iOptron 8600 Manual de usuario
iOptron
iOptron SmartStar N114 Manual de usuario
iOptron
iOptron 6001 Manual de usuario
iOptron
iOptron iExplore 70AZ Manual de usuario
iOptron
iOptron #9102 Manual de usuario
iOptron
iOptron SmartStar 9503 Manual de usuario
iOptron
iOptron Solar 60 Manual de usuario
iOptron
iOptron Solar 60 GOTO Manual de usuario
iOptron
iOptron VERSA 6102 Manual de usuario
iOptron
iOptron Maksutov-Cassegrain Manual de usuario
iOptron
iOptron SmartEQ 3100 Manual de usuario
iOptron
iOptron SmartStar Cube 8800G Manual de usuario
iOptron
iOptron iExplorer Manual de usuario
iOptron
iOptron AstroBoy 9401 Manual de usuario
iOptron
iOptron SmartStar 8405 Manual de usuario
iOptron
iOptron 9501-W Manual de usuario
iOptron
iOptron SmartStar R-80 Manual de usuario
iOptron
iOptron AstroBoy-70e Manual de usuario
iOptron
iOptron SmartStar A-MC90 Manual de usuario
