TECHNICAL SPECIFICATION FOR RO SYSTEM
The RO water purifier units have 6 purifier stages in a CRCA steel skid frame
powder coated for corrosion protection.
Stage 1: Particulate Filter
Size : 2.5” Dia 20” Height
MOC of Cartridge : PP Yarn
Nominal rating of Cartridge : 10 microns
Qty : : 1 No
Stage 2: Membrane Life Enhancer Filter
Size : 2.5” Dia 10” Height
Weight of Content : 250Gms of Membrane Anti-scalent
Qty : 1 No
Stage 3: Sediment Filter
Size : 2.5” Dia 20” Height
Cartridge : PP Yarn
Nominal rating : 10 microns
Qty : 1 No
Stage 4: Pre Carbon filter
Size : 2.5” Dia 20” Height
Type : Carbon Block
Qty : 1 No
Stage 5: RO Membrane Filter
Type : Membranes 80 GPD X 4 in concealed housing.
Salt rejection% : 90% or more, which effectively removes input
TDS, Chemical Impurities, bacteria and Virus.
Qty : 4 Nos
Stage 6: Post Carbon Filter
Type : Carbon Block
Size : 2.5: Dia 20” Height
Qty : 1 No
