IOGear GBU522 Manual de usuario
www.iogear.com
Quick Start Guide
Bluetooth 4.0 USB Mini Adapter
Guide de démarrage rapide
Mini adaptateur USB Bluetooth 4.0
Guía de inicio rápido
Mini Adaptador Bluetooth® 4.0 USB
GBU522
PART NO. Q1241
2
Package Contents
1 x GBU522
1 x Driver Mini DVD
1 x Warranty Card
• USB Port (USB 1.1, 2.0, 3.0 Type-A)
• Windows®7, Windows®8.1, and Windows®10
System Requirements
3
Connections & Ports
Install the IOGEAR Mini Bluetooth USB Adapter to the USB
Type-A port of the computer
4
Software Installation
1. Insert the IOGEAR Bluetooth v4.0 adapter into any
available USB port on your computer.
2. Insert the Mini-DVD into your computer’s DVD Drive
(* Not all DVD drive supports Mini-DVD disc, please check
your computer DVD drive specication for Mini-DVD
compatibility before inserting the disc)
3. If your Windows operating system is 64 bit based, browse
the contents of the CD to the X64 Folder.
4. Run Setup.exe from within the X64 folder (For 32bit
Windows system, run setup.exe instead)
5. The installation process will start; select and click OK
6. Install the CSR harmony Software and click Next
7. Follow the instruction on the screen and select “I accept
the terms in the license agreement” and click next. It is
recommended that you keep the default installation path.
5
8. Click Next, you will now be prompted to setup the Bluetooth
stack. The recommended settings are: Discovery Mode:
select “Discovery On” to allow other Bluetooth hosts to nd
your computer. SCMS-T: select “Enabled” to support music in
SCMS-T format.
6
CONNECTING BLUETOOTH DEVICES
1. Your computer is now Bluetooth 4.0 enabled and you are
ready to connect your Bluetooth devices. Before you are
able to use a Bluetooth device for the rst time you must
connect your device through a standard procedure of
discovery and pairing. Run the CSR Harmony Bluetooth
Stack by double clicking the Bluetooth icon on your system
tray or desktop.
2. Make sure your Bluetooth device is in pairing mode. Just go
to the blue Bluetooth icon on the notication area and right
click. Select ‘Add Bluetooth Device”.
7
3. When your Bluetooth device is found, double click the device
name to make the connection.
4. When the device is successfully connected to your host
system, a green check mark is shown next to the device.
Click Fish to exit and the device will now be working.
8
CONNECTING A KEYBOARD
1. When connecting a keyboard, the Add Bluetooth Device
Wizard will ask for a pairing code. Enter the code on
the Bluetooth keyboard you are pairing (not the built-in
notebook computer keyboard) and press “Enter” on the
keyboard to send the code.
2. To check the Bluetooth device status, click on the Bluetooth
icon on your system tray.
9
REMOVING BLUETOOTH DEVICES
To remove devices from your Bluetooth connection, select “File”
and from the pull down menu select “Remove Device”. Select
the device from the list to remove it.
OPERATING TIPS & TROUBLESHOOTING
Before connecting a new Bluetooth device, make sure the
device is turned on, has Bluetooth enabled and is discoverable.
10
Compliance Information
FCC STATEMENT
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential setting. This product generates, uses, and
can radiate radio frequency energy and, if not installed and used as
directed, it may cause harmful interference to radio communications.
Although this product complies with the limits for a Class B digital
device, there is no guarantee that interference will not occur in a
particular installation.
CE COMPLIANCE
This device has been tested and found to comply with the following
European Union directives: Electromagnetic Capability (2004/108/EC),
Low Voltage (2006/95/EC) and R&TTED (1999/5/EC).
ID# 8470A-GBU522
IC Statement
This device complies with Industry Canada licence-exempt RSS
standard. Operation is subject to the following two conditions:
(1) this device may not cause interference,
and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limit set
forth for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 0.5 cm between the radiator and
your body.
Tabla de contenidos
Idiomas:
Otros manuales de Adaptador de IOGear
IOGear
IOGear GBS301 Manual de usuario
IOGear
IOGear GUC232A Guía de inicio rápido
IOGear
IOGear GUV301 Manual de usuario
IOGear
IOGear GUWA100U M0425 Manual de usuario
IOGear
IOGear GBU521 Manual de usuario
IOGear
IOGear GBU201 Manual de usuario
IOGear
IOGear GWU735 Manual de usuario
IOGear
IOGear GBP301 Manual de usuario
IOGear
IOGear KeyMander 2 Guía de instalación
IOGear
IOGear GBC201 Manual de usuario
IOGear
IOGear Network Adapter GUW2015V Manual de usuario
IOGear
IOGear GWU637 Manual de usuario
IOGear
IOGear GVC311 Manual de usuario
IOGear
IOGear GWU513 Manual de usuario
IOGear
IOGear Cardbus Card GPU202 GPU202 GPU202 Manual de instrucciones
IOGear
IOGear GWU635 Manual de usuario
IOGear
IOGear GUC210T Manual de usuario
IOGear
IOGear M1063 Manual de usuario
IOGear
IOGear GBU301 Manual de usuario
IOGear
IOGear GBU241W6 Manual de usuario
