Installation
570mm
80mm
570mm
80mm
RGB Control
- PSU (out): Use the provided 4-pin (12V) header to connect
the PSU RGB Control port if your motherboard doesn't
support the RGB function or if you don't need to sync
RGB motherboard together. Please turn o the M/B
RGB override button (switch to "O" status).
- M/B(in): Use the provided 4-pin (12V) header to connect
the Motherboard RGB Control port to sync RGB omponents
together using the motherboard's software. Please turn
on the M/B RGB override button (switch to "I" status),
If you opt to use the Motherboard RGB Control port, the
PSU RGB Control port will be disabled.
4. RGB Mode: This mode provides eight options: Red,
green, dark blue, yellow, purple, light blue, white and
a breathing eect. Completely match the theme of
your rig! The power supply also features a built-in memory
function to save the applied color, insuring the same
selected color appears every time you boot your PC.
Please turn o the M/B RGB override button (switch to
"O" status) to manually switch the colors or activate
the breathing eect.
Compatible with other RGB sync-ready components. Please do not connect
with any motherboard or power in by SATA connector to avoid any damages.
Compatible with other RGB sync-ready components.
