Involight TRINITY150LED Manual de usuario

User manual

TRINITY150LED

Hybrid moving head 3 in1 Spot / Wash / Beam

Ver. 1.0

Table content

INVGROUP Germany GmbH

Senefelder-Ring 91

21465 Reinbek

Congratulation for choosing INVOLIGHT TRINITY150LED. With this device you become

an owner of a professional hybrid moving head with our latest technology. In order to

make your TRINITY150LED long lasting, please read these instructions carefully before

operation. If you have any questions, please contact your local INVOLIGHT dealer.

Part 1: Warnings: .........................................................................................................................................................3

1.1 Meaning of the safety symbols and signal words..............................................................................................3

1.2 Safety instructions:............................................................................................................................................4

Part 4. Functions and operations.................................................................................................................................7

4.1 QVGA display:...................................................................................................................................................7

4.2 Menu structure: .................................................................................................................................................7

4.3 Connections:....................................................................................................................................................11

4.4 Connections in DMX mode „DMX“: .................................................................................................................12

4.5 MASTER-SLAVE mode:..................................................................................................................................13

4.6 STAND-ALONE mode: ....................................................................................................................................13

5. Part DMX-Assignment. ..........................................................................................................................................13

Part 8. Technical specifications..................................................................................................................................19

Part 9. Environmental protection. ..............................................................................................................................21

Part 10. WARRANTY:................................................................................................................................................21

Part 1: Warnings:

1.1 Meaning of the safety symbols and signal words

DANGER!

A combination of this signal word and a symbol indicates an imminently hazardous situation that leads to death or serious injury

if not avoided.

WARNING!

A combination of this signal word and a symbol indicates an imminently hazardous situation that can lead to death or serious

injury if not avoided.

CAUTION!

A combination of this signal word and a symbol indicates an imminently hazardous situation, which can lead to minor injuries if

not avoided.

NOTE!

A combination of this signal word and a symbol indicates a directly dangerous situation, which can lead to material and environ-

mental damage if not avoided.

Warning of a hazard.

Warning of dangerous voltage.

Earth before use.

General prohibition sign.

Disconnect the mains plug before opening.

1.2 Safety instructions:

This information sheet contains important information of safety operation of the device. Ensure that this information

is available to all persons using this device.

The rating plate is located on the bottom of the product.

Please read all warnings and operating instructions carefully before using this unit. Keep this manual for future ref-

erence. Please follow all instructions in this manual.

Electric shock due to improper mains connection.

This product corresponds to the protection class I in its design and may only be operated at a socket with pro-

tective contact. Use only the supplied power cord to connect. Do not modify the power cord or plug, and check

the insulation of the cable regularly for damage. Failure to do so may result in electric shock, fire or life. In case

of uncertainties, contact an authorized electrician.

DANGER!

Electric shock due to high voltages inside the device.

The device contains components that are subject to a high electrical voltage. Do not modify or disassemble the

unit. There are no user-serviceable components inside the device. Failure to do so may result in electric shock,

fire or life.

NOTE!

Disconnection from the mains.

The mains plug is the main disconnect element. Unplug the power cord from the power source. Make sure that

the power outlet is close to the unit and is easily accessible.

DANGER!

WARNING!

Operating conditions.

To avoid damage, do not expose the unit to liquids or moisture. If there is a suspicion that liquid may have pe-

netrated into the device, the device must be immediately disconnected from the mains. This also applies if the

unit is exposed to high humidity. Even if the device still seems to work, it must be checked by an expert whether

the liquid penetration may have been impaired. Reduced insulation can cause fatal electric shocks. Avoid direct

sunlight, strong dirt and strong vibrations.

WARNING!

Eye injuries due to high light intensity.

Never look directly into the light source. A direct view into the beam can lead to retinal burns and must be avo-

ided at all circumstances.

WARNING!

Risk of epileptic seizure

1.3 Intended use.

The INVOLIGHT "TRINITY150LED" is a light unit with colored light effects. It was developed and designed for pro-

fessional use in the field of event technology - exclusively indoors. The device may only be used by persons with

sufficient physical, sensory and mental abilities as well as the appropriate knowledge and experience. Other per-

sons may only use the device if they are supervised or instructed by a person responsible for their safety.

The device is only approved for AC power, 100-240Volt and 50 / 60Hz power supply.

Light effect devices such as "TRINITY150LED" are sensitive and technically advanced devices that must be han-

dled with care. Therefore, avoid shocks and violence during assembly / disassembly and the use of the device.

Install "TRINITY150LED" only in places that are protected from dust, moisture and excessive heat. The approved

operating temperature must be in the range -5 ° to + 45 ° Celsius and the relative humidity must not exceed 50%

(at + 45 °)! Direct sunlight should be avoided during use and during transport. In the interests of your own safety

and those of others, make sure that there are no cables around.

During thunderstorms, the device must be disconnected from the power supply!

Moving heads are generally to be secured with an approved safety rope when suspended!

"TRINITY150LED" is designed only for professional use, if you are familiar with the functions and are familiar with

the operation. Only allow other people to work with the device if you are sure they are familiar with the features as

well. In most cases, malfunctions are a consequence of a previous maloperation.

Damage resulting from failure to comply with the intended use and instructions given in this manual will void the

warranty and may result in consequences such as short-circuit, fire, electric shock, or dropping the device (s).

Unauthorized changes to the device are prohibited for security reasons.

The manufacturer is not liable for damage caused by improper installation and insufficient security!

Part 2: Installation.!

Unpack the device and carefully check for damages before using it. Place the unit in a suitable place or hang it on

a suitable crossbar. For suspended installation, the device must be secured with an approved safety rope. In addi-

tion, the mounting bracket must be screwed with the enclosed screws and tightened! Then connect the device to

the mains and, if necessary, connect a DMX cable and connect it to other devices or a DMX controller. More about

DMX or Master / Slave operation also in part 3 and 4.

During installation, provisions of the BGV C1 (formerly VBG 70) and DIN 15560 must be observed! Autho-

rized specialists may only carry out the installation!

Avoid long periods of continuous flashing and, in particular, flash frequencies between 10 and 20 flashes / se-

cond, as epileptic seizures can be triggered in susceptible individuals (especially for epileptics)

NOTE!

Risk of fire.

Never cover the unit or the ventilation slots. Do not mount the unit directly next to a heat source. Keep the devi-

ce away from the fire and heat.

WARNING!

Do not leave the packaging material careless. Plastic films, Styrofoam parts etc. could be a dangerous toy for

children!

IMPORTANT! Overhead mounting requires a lot of experience. This includes knowledge of the load bearing capac-

ity, the installation material used and the safety inspections of the material and the projector used, but the required

experience is not limited to this. If you do not have the appropriate qualification. Instead, commission a professional

installer. Incorrect installation may result in personal injury and / or damage to property.

NOTE!

Possible damage due to movement of the device.

Make sure there is enough room around the device for the movement of the head (pan,

tilt).

Omega kampó és tartó-

szerkezete

Biztonsági drótkötél (safety)

C-kampó / bilincs

Part 4. Functions and operations.

4.1 QVGA display:

Connect the "TRINITY150LED to the mains. The device performs the usual reset procedure. Wait until it's done.

The LCD display with 4-button operation is the heart of the "TRINITY150LED". This can be used to set all functions

and modes. Below, the individual functions and modes are listed in tabular form.

1. Switch DMX channel mode

2. Product information

3. Invert display

4. Menu

5. Instructions

6. DMX start address

7. DMX start address for subsequent device

4.2 Menu structure:

Mode

Description

Return

Down

Enter

Address

Address Setting

DMX addressing.

a) Press the (Enter) key until “DMX Address” is displa-

yed.

b) Press the ▲(Up) or ▼(Down) button to select the

desired address.

c) As soon as the correct address is shown on the dis-

play, confirm with the (OK) key

d) Press the (Return) key to exit the selection without

saving.

Fixture

Channel Mode

Standard

Mode

This allows you to select your desired DMX channel

mode.

a) Press the (Enter) key until “Channel Mode” is displa-

yed.

b) To select the desired DMX mode, press the ▲(Up)

or ▼(Down) button.

c) To confirm and exit the menu, press the (OK) key

d) Press the (Return) key to exit the selection without

saving.

Extend Mode

Pan/Tilt Setting

Invert Pan

Pan-tilt inversion.

a) Press the (Enter) key until "Pan Invert" or "Tilt Invert"

is displayed.

b) Press the ▲(Up) or ▼(Down) button until "Yes" or

"No" is displayed.

c) To confirm and exit the menu, press the (OK) key

d) Press the (Return) key to exit the selection without

saving.

Invert Tilt

Swap Pan-

Tilt

The PAN and Tilt channels can be swapped under PAN

/ TILT SWAP.

a) Press the (Enter) key until "Swap Pan-Tilt" is displa-

yed.

b) Press the ▲(Up) or ▼(Down) button until "On" or

"Off" is displayed.

c) To confirm and exit the menu, press the (OK) key

d) Press the (Return) key to exit the selection without

saving.

W-DMX

Activate W-DMX mode.

a) Press the (Enter) key until “W-DMX” is displayed.

b) Press the ▲(Up) or ▼(Down) button until "On" or

"Off" is displayed.

c) To confirm and exit the menu, press the (OK) key

d) Press the (Return) key to exit the selection without

saving.

Manual

Reset

Head Reset

With this function you can reset the device.

a) Press the (Enter) key until "Reset" is displayed.

b) To select the desired reset functions, press the ▲

(Up) or ▼(Down) button.

c) To confirm and exit the menu, press the (OK) key

d) Press the (Return) key to exit the selection without

saving.

Pan/Tilt Re-

set

All reset

Scene

Mode

This allows you to select the scene mode.

a) Press the (Enter) key until “Mode” is displayed.

b) To select the desired mode function, press the ▲

(Up) or ▼(Down) button.

c) To confirm and exit the menu, press the (OK) key

d) Press the (Return) key to exit the selection without

saving.

Index

Index selection.

a) Press the (Enter) key until “Index” is displayed.

b) Press the ▲(Up) or ▼(Down) button to select the

desired index.

c) To confirm and exit the menu, press the (OK) key

d) Press the (Return) key to exit the selection without

saving.

Enable

With this function you can activate the device.

a) Press the (Enter) key until “Enable” is displayed.

b) Press the ▲(Up) or ▼(Down) button until "On" or

"Off" is displayed.

c) To confirm and exit the menu, press the (OK) key

d) Press the (Return) key to exit the selection without

saving.

Time

With this function you can set the time.

a) Press the (Enter) key until “Time” is displayed.

b) Press the ▲(Up) or ▼(Down) button to select the

desired time.

c) To confirm and exit the menu, press the (OK) key

d) Press the (Return) key to exit the selection without

saving.

Save DMX

With this function you can save the DMX values.

a) Press the (Enter) key until “Save DMX” is displayed.

b) Press the ▲(Up) or ▼(Down) buttons to confirm or

cancel the DMX storage.

c) To confirm and exit the menu, press the (OK) key

d) Press the (Return) key to exit the selection without

saving.

Channel

Pan

0-255

"Channel control" operating mode

The "Manual control" mode can only be activated if the

device is working alone or is the master in a master-

slave combination. This setting is only relevant if the

device is not controlled by DMX.

a) Press the (Enter) key until “chanel control” is displa-

yed.

b) To select the desired parameter, press the ▲(Up) or

▼(Down) button.

c) Press (OK) to edit the values.

d) Press the ▲(Up) or ▼(Down) buttons to select the

value between "0" and "255".

e) Press the (OK) button to confirm and exit the menu.

f) Press the (Return) key to exit the selection without

saving.

Tilt

0-255

Dimmer

0-255

Strobe

0-255

Color wheel

0-255

Fixed-Gobo

0-255

Rot-Gobo

0-255

Rot-Gobo

Rot

0-255

Prism

0-255

Prism Rot

0-255

Frost

0-255

Focus

0-255

Zoom

0-255

System

control

0-255

System

Language

Language selection

Display

Normal

Invert display (for example in flight operations).

a) Press the (Enter) key until "Display" appears.

b) To select the desired mode, press the ▲(Up) or ▼

(Down) button.

c) To confirm and exit the menu, press the (OK) key

d) Press the (Return) key to exit the selection without

saving.

Invert

Tabla de contenidos

Otros manuales de Equipo de DJ de involight

involight

involight MATRIX4415 Manual de usuario

involight

involight Paint BAR UV12 Manual de usuario

involight

involight Trinity Plus Manual de usuario

involight

involight LED RX200 Manual de usuario

involight

involight SBL1000HP Manual de usuario

involight

involight TRINITY200LED Manual de usuario

involight

involight LEDMH100 Manual de usuario

involight

involight QUADBAR1631 Manual de usuario

involight

involight LEDBAR508R Manual de usuario

involight

involight LEDRX500 Manual de usuario

involight

involight LED MH368ZW Manual de usuario

involight

involight TWINBEAM2410 Manual de usuario

involight

involight LEDBAR FX103 Manual de usuario

involight

involight LEDMH50 DUAL Manual de usuario

involight

involight ZoomSpot415 Manual de usuario

involight

involight AX470 Manual de usuario

involight

involight LED MH 1930 Manual de usuario

involight

involight MH MATRIX25 Manual de usuario

involight

involight Paint BAR HEX6P Manual de usuario

involight

involight LED RX350 Manual de usuario

involight

involight BM100 Manual de usuario

involight

involight NL400 Manual de usuario

involight

involight TRINITY200LED V.2 Manual de usuario

involight

involight SLIMPAR1210PRO Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario

involight TRINITY150LED Manual de usuario

Manuales populares de Equipo de DJ de otras marcas