Involight BM300 Manual de usuario

Tabla de contenidos

Otros manuales de Equipo de DJ de involight

involight

involight SlimPAR644 Manual de usuario

involight

involight Paint BAR UV12 Manual de usuario

involight

involight SLIMPAR710PRO Manual de usuario

involight

involight VENTUS L Manual de usuario

involight

involight LED SPOT80 Manual de usuario

involight

involight TRINITY200LED V.2 Manual de usuario

involight

involight ALPINA 1200DMX Manual de usuario

involight

involight MATRIX4415 Manual de usuario

involight

involight TRINITY150LED Manual de usuario

involight

involight QUADBAR1631 Manual de usuario

involight

involight LED Mixmaster LEDSPOT433 Manual de usuario

involight

involight LEDBAR FX103 Manual de usuario

involight

involight LEDRX600 Manual de usuario

involight

involight LEDBAR500 Manual de usuario

involight

involight MATRIX559 Manual de usuario

involight

involight MH MATRIX25 Manual de usuario

involight

involight LEDMH50 DUAL Manual de usuario

involight

involight BL4650 Manual de usuario

involight

involight LED MH 1930 Manual de usuario

involight

involight LEDRING800 Manual de usuario

involight

involight LEDRX500HP Manual de usuario

involight

involight LEDSTROB18 Manual de usuario

involight

involight TWINBEAM2410 Manual de usuario

involight

involight LEDBAR508R Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario

BM300

POWER BUBBLE MACHINE

USER MANUAL

Please read over this manual before operation the machine

Introduction

Thank you for choosing this Bubble Machine. You now own a rugged and Setup

1. Remove all packing materials from the bubble machine.

powerful state-of-the-art machine. Prior to use, we suggest that you carefully read

all of the instructions. By following the suggestions found in this user manual, you

can look forward to exceptional performance from your Bubble Machine for years

to come.

Please follow these operation, safety and maintenance instructions to ensure

along and safe life for your Bubble Machine.

Specifications:

Model No.: BM300

Remote Control

Tank Capacity: 2.5L

Approx.Bubble Projection:5meters

Weight:: 14kg

Voltage: 220-250V 50/60Hz

Power: 300W

Size: 45*39*41cm

Unpacking & Inspection

◆Open the shipping carton and check that all equipment necessary to operate

the system has arrived intact. In addition to the Bubble Machine, you

should receive the following items:

1. This user manual.

2. A set of remote control.

◆Before beginning initial setup of your Bubble Machine, make sure that there is no

evident damage caused by transportation.

◆ In the event that the unit’s housing or cable is damaged, do not plug it in and do

not attempt to use it until after contacting your dealer for assistance.

2. Place bubble machine on a flat surface.

3. Loosen the side screws and lift the housing upwards. You will see a liquid tank.

4. Pour bubble liquid into the liquid tank, being careful not to exceed the

maximum fluid level. Do not overfill.

5. When the container is full, lower the housing and tighten the screws.

IMPORTAN SAFETY NOTICE:

◆Ensure your bubble machine is unplugged from the mains electrical supply

before attempting to open the housing.

◆To help avoid accidental exposure to dangerous live AC mains voltage, two

safety screws are fitted that require a screwdriver to remove. Once these are

removed, the finger screws can be undone by hand.

◆Once the screws are removed, the lid of the housing can be carefully swung

upwards, as shown above. Take care not to spill any of the bubble fluid inside

the unit.

◆The fluid tank is designed to fit only one way around. Make sure you insert it

correctly, as shown above, with the lower edge facing into the machine.

◆Never aim the output at open flames.

◆Position output of bubbles away from persons

OPERATION

Turn on the power switch located on the back of the bubble machine. You will

notice that the internal bubble drum and fan are activated. Bubbles are now

produced.