InVid Tech PAR-P2TEMPTABLET Manual de usuario
PAR-P2TEMPTABLET
2Megapixel
Temperature Measurement&
Face Recognition Terminalx
User Manual
Temperature Measurement & Face Recognition Terminal User Manual
Please read this instruction carefully before operating the unit and keep it for further
reference
Notes on Safety
This product is intended to be supplied by a Listed Power Unit, marked with 'Limited
Power Source', 'LPS' on unit, output rated minimum 12V/1 A, no more than 2000m
altitude of operation and Tma=60 Deg.C.
Do not attempt to disassemble the camera; in order to prevent electric shock, do not
remove screws or covers.
There are no user-serviceable parts inside. Please contact the nearest service center as
soon as possible if there is any failure.
Avoid from incorrect operation, shock vibration, heavy pressing which can cause damage
to product.
Do not use corrosive detergent to clean main body of the camera. If necessary, please use
soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any cleanser for
high grade furniture is applicable.
Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this
may damage the image sensor.
In order to ensure the accuracy of the temperature measurement, please install the terminal
in a stable indoor environment.
Do not operate it in case temperature, humidity and power supply are beyond the limited
stipulations.
Keep away from heat sources such as radiators, heat registers, stove, etc.
Do not expose the product to the direct airflow from an air conditioner.
This manual is for using and managing the product. We may reserve the rights of
amending the typographical errors, inconsistencies with the latest version, software
upgrades and product improvements, interpretation and modification. These changes will
be published in the latest version without special notification.
In this manual, the trademarks, product names, service names, company names, products
that are not owned by our company are the properties of their respective owners.
This manual is suitable for face recognition & temperature measurement terminals.
Temperature Measurement & Face Recognition Terminal User Manual
Disclaimer
With regard to the product with internet access, the use of product shall be wholly at
your own risks. Our company shall be irresponsible for abnormal operation, privacy
leakage or other damages resulting from cyber attack, hacker attack, virus inspection, or
other internet security risks; however, our company will provide timely technical support
if necessary.
Surveillance laws vary from country to country. Check all laws in your local region
before using this product for surveillance purposes. We shall not take the responsibility
for any consequences resulting from illegal operations.
Cybersecurity Recommendations
Use a strong password. At least 8 characters or a combination of characters,
numbers, and upper and lower case letters should be used in your password.
It is recommended to change the service default ports (like HTTP-80, HTTPS-443,
etc.) to reduce the risk of outsiders being able to access.
It is recommended to set the firewall of your router. But note that some important
ports cannot be closed (like HTTP port, HTTPS port, Data Port).
It is not recommended to expose the device to the public network. When it is
necessary to be exposed to the public network, please set the external hardware firewall
and the corresponding firewall policy.
It is not recommended to use the v1 and v2 functions of SNMP.
In order to enhance the security of WEB client access, please create a TLS
certificate to enable HTTPS.
Use black and white list to filter the IP address. This will prevent everyone, except
those specified IP addresses from accessing the system.
If you add multiple users, please limit functions of guest accounts.
If you enable UPnP, it will automatically try to forward ports in your router or
modem. It is really very convenient for users, but this will increase the risk of data
leakage when the system automatically forwards ports. Disabling UPnP is recommended
when the function is not used in real applications.
Check the log. If you want to know whether your device has been accessed by
unauthorized users or not, you can check the log. The system log will show you which IP
addresses were used to log in your system and what was accessed.
Temperature Measurement & Face Recognition Terminal User Manual
Regulatory Information
FCC Information
1.FCC compliance
The products have been tested and found in compliance with the council FCC rules and
regulations part 15 subpart B. These limits are designed to provide reasonable protection
against harmful interference. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communication. However, there is no guarantee
that interference will not occur in a particular installation. The user will be required to
correct the interface at his own expense in case the harmful interference occurs.
2. FCC conditions:
Operation of this product is subject the following two conditions: (1) this device may not
cause harmful interface, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CE Information
The products have been manufactured to comply with the following directives.
EMC Directive 2014/30/EU
RoHS
The products have been designed and manufactured in accordance with Directive EU
RoHS Directive 2011/65/EU and its amendment Directive EU 2015/863 on the restriction
of the use of certain hazardous substances in electrical and electronic equipment.
2012/19/EU (WEEE directive): The Directive on waste electrical and electronic
equipment (WEEE Directive). To improve the environmental management of
WEEE, the improvement of collection, treatment and recycling of electronics at
the end of their life is essential. Therefore, the product marked with this symbol
must be disposed of in a responsible manner.
Directive 94/62/EC: The Directive aims at the management of packaging and packaging
waste and environmental protection. The packaging and packaging waste of the product
in this manual refers to must be disposed of at designatedcollection points for proper
recycling and environmental protection.
REACH(EC1907/2006): REACH concerns the Registration, Evaluation, Authorization
and Restriction of Chemicals, which aims to ensure a high level of protection of human
health and the environment through better and earlier identification of the intrinsic
properties of chemical substances. The product in this manual refers to conforms to the
Temperature Measurement & Face Recognition Terminal User Manual
rules and regulations of REACH. For more information of REACH, please refer to DG
GROWTH or ECHA websites.
Table of Contents
1Introduction ......................................................................................................................1
2Login &Network Connection ..........................................................................................2
1.1 Login ..........................................................................................................................2
1.2 Network Configuration...............................................................................................3
1.2.1 LAN....................................................................................................................3
1.2.2 WAN...................................................................................................................5
3Temp Reading & FR Config............................................................................................9
3.1 Temperature Measurement Settings ...............................................................................9
3.2 People Management.....................................................................................................10
3.3 Face Database Management via Web Client................................................................13
3.4 Face Match Settings .....................................................................................................15
3.5 Mask Detection ............................................................................................................17
4Live View.........................................................................................................................18
4.1 Temperature Measurement& Face Recognition View .................................................18
4.1.1 Temperature Measurement Requirements ...............................................................18
4.1.2 Temperature Measurement& Face Recognition View.............................................19
4.2 Live View via Web .......................................................................................................20
5Access Control Settings..................................................................................................23
5.1 Door Lock Settings ......................................................................................................23
5.2 Access Control System Settings...................................................................................24
5.3 Wiegand Settings..........................................................................................................25
5.4 Questionnaire ...............................................................................................................26
5.5 Tampering Alarm Settings............................................................................................27
6Other Configurations .....................................................................................................29
6.1 System Settings ............................................................................................................29
6.1.1 Basic Information....................................................................................................29
6.1.2 Date and Time.........................................................................................................29
6.1.3 Local Config............................................................................................................30
6.1.4 Storage.....................................................................................................................30
6.2 Image Configuration ....................................................................................................33
6.2.1 Display Configuration.............................................................................................33
6.2.2 Video / Audio Configuration...................................................................................35
6.2.3 OSD Configuration..................................................................................................36
6.2.4 White Light Control ................................................................................................37
6.2.5 Face Exposure .........................................................................................................38
Temperature Measurement & Face Recognition Terminal User Manual
6.3 Alarm Configuration ....................................................................................................38
6.3.1 Exception Detection ................................................................................................38
6.3.2 SD Card Full............................................................................................................39
6.3.3 SD Card Error..........................................................................................................39
6.3.4 IP Address Conflict..................................................................................................40
6.3.5 Cable Disconnection................................................................................................40
6.3.6 Alarm In...................................................................................................................41
6.3.7 Alarm Out................................................................................................................42
6.4 Network Configuration ................................................................................................43
6.4.1 TCP/IP .....................................................................................................................43
6.4.2 Port ..........................................................................................................................44
6.4.3 Server Configuration ...............................................................................................44
6.4.4 DDNS ......................................................................................................................45
6.4.5 RTSP........................................................................................................................46
6.4.6 UPnP........................................................................................................................47
6.4.7 Email .......................................................................................................................48
6.4.8 FTP ..........................................................................................................................49
6.4.9 HTTPS.....................................................................................................................49
6.4.10 P2P (Optional).......................................................................................................51
6.5 Security Configuration.................................................................................................51
6.5.1 User Configuration..................................................................................................51
6.5.2 Online User..............................................................................................................53
6.5.3 Block and Allow Lists .............................................................................................53
6.5.4 Security Management..............................................................................................54
6.6 Maintenance Configuration..........................................................................................54
6.6.1 Backup and Restore.................................................................................................54
6.6.2 Reboot .....................................................................................................................55
6.6.3 Upgrade ...................................................................................................................55
6.6.4 Operation Log..........................................................................................................56
7Search ..............................................................................................................................56
7.1 Image Search................................................................................................................57
7.2 Video Search ................................................................................................................59
7.2.1 Local Video Search..................................................................................................59
7.2.2 SD Card Video Search.............................................................................................60
8Face Match Result Search .............................................................................................62
Appendix .................................................................................................................................63
Appendix 1Troubleshooting ..................................................................................................63
Appendix 2Specifications.......................................................................................................65
1
Temperature Measurement & Face Recognition Terminal User Manual
1Introduction
This series of product is specially designed and developed for face recognition and temperature
measurement applications, featuring non-contract temperature measurement, high performance
and reliability, faster recognition and higher accuracy rate. Based on deep-learning algorithm,
it combines temperature measurement, identity authorization and access control.
It can be widely used in the entrances and exits of community, schools, hospitals, scenic areas,
hotels, shopping malls, office buildings, public services and construction sites for body
temperature measurement, identity authorization and access control.
Main Features
8 inch LCD touch screen
High-accuracy IR body temperature measurement
Non-contact body temperature measurement
Human-sounding voice prompt
Real-time face mask detection
Face liveness detection technology distinguishing real faces from non-real face spoof
attacks
Highly accurate face recognition using deep learning algorithm
Stand-alone device, ready for networking
2
Temperature Measurement & Face Recognition Terminal User Manual
2Login &Network Connection
1.1 Login
After the device is powered on and connected to the LAN, you will see the following interface.
Tap the menu button to pop up a login box. Enter the username and password and tap “OK” to
enter the main menu page as shown below.
The default username: admin
The default password: 123456
3
Temperature Measurement & Face Recognition Terminal User Manual
1.2 Network Configuration
1.2.1 LAN
Network connection:
There are two ways to set the network configuration.
Configuring the network via the terminal
In the main menu page of the terminal, tap “Network Config” to go to the network config
interface.
Please set IPv4 or IPv6 as needed. Here taking IPv4 network settings for example.
You can enter IP address, subnet mask, gateway and DNS server manually or get these network
parameters by selecting obtaining IP address automatically.
After that, tap to save the settings.
Note: If you want to obtain IP address automatically, you shall enable DHCP function in the
router.
4
Temperature Measurement & Face Recognition Terminal User Manual
Configuring the network via the IP Tool
①Make sure the PC and the terminal are connected to the LAN and the IP-Tool is installed in
the PC from the CD.
② Double click the IP-Tool icon on the desktop to run this software as shown below:
③ Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the
information of the camera listed in the above table to show the network information on the right
hand. Modify the IP address and gateway of the camera and make sure its network address is
in the same local network segment as the computer’s. Please modify the IP address of your
device according to the practical situation.
For example, the IP address of your computer is 192.168.1.4. So the IP address of the camera
shall be changed to 192.168.1.X. After modification, please enter the password of the
administrator and click the “Modify” button to modify the setting.
④ Double click the IP address and then the system will pop up the IE browser to connect IP-
CAM. Follow directions to download, install and run the Active X control.
The default password of the administrator is “123456”.
Tabla de contenidos
