inveo MM-04 Manual de usuario
User manual Media monitor
Version 1.01 Page 2 of 21 Go to table of contents
Dear Customer
Thank you very much for choosing our product. At the same time, please read this manual
carefully before using it, as it indicates the most appropriate ways to handle this appliance,
taking into account basic safety and maintenance principles. Please also retain the manual for
future reference.
Remember!
The manufacturer will not be held liable for any damage caused by improper use of the device or improper
handling, nor for any malfunctions of the controller resulting from improper operation.
User manual Media monitor
Version 1.01 Page 3 of 21 Go to table of contents
Spis treści:
Spis treści: .............................................................................................................. 3
1Preliminary information ........................................................................................ 4
2Warranty and liability of the manufacturer ............................................................... 4
3Safety of use ...................................................................................................... 5
3.1 Storage, operating conditions ...........................................................................5
3.2 Installation and use of the modulemodułu ..........................................................5
3.3 Disposal and decommissioning .........................................................................5
4Purpose of the device ........................................................................................... 5
5Construction of the device..................................................................................... 6
5.1 Technical data: ..............................................................................................6
5.2 Dimensions ...................................................................................................7
5.3 General view .................................................................................................7
6Configuring the unit ............................................................................................. 9
6.1 Entering the module page via the Discoverer programme......................................9
6.2 Changing the subnet of the configuration computer .............................................9
7Web page of the device....................................................................................... 11
8Home tab ......................................................................................................... 12
9Counter tab ...................................................................................................... 13
10 Log tab ............................................................................................................ 14
11 Network tab...................................................................................................... 14
12 Zakładka SNMP ................................................................................................. 15
13 Administration tab ............................................................................................. 15
14 Windows command line control program................................................................ 16
15 Linux control program ........................................................................................ 18
16 Communication with the module via the modbus TCP protocol .................................. 19
17 Communication with the module from an external network....................................... 20
18 Restoring the factory settings .............................................................................. 20
19 Software update ................................................................................................ 20
User manual Media monitor
Version 1.01 Page 4 of 21 Go to table of contents
1Preliminary information
Before using the controller, please read the User Manual carefully and strictly follow the
instructions contained therein.
Description of symbols used in this manual:
Warning
This symbol indicates that it is necessary to read a specific section of the
User Manual that contains important information and warnings. Ignoring
these warnings may lead to injury or damage to the equipment.
Directions
Important instructions and information.
Observing the texts marked with this symbol facilitates operation.
The screenshots presented in this manual may not reflect the exact appearance of the actual
interface. Due to constant software updates, certain features may differ from those shown in
this document. The manufacturer is not responsible for any consequences resulting from
software discrepancies.
2Warranty and liability of the manufacturer
Warning
The manufacturer provides a one-year warranty for the device and a
post-warranty service for a period of 10 years from the date the device
was placed on the market. The warranty covers all material and manu-
facturing defects.
The manufacturer undertakes to comply with the warranty agreement if the following
conditions are met:
•all repairs, modifications, extensions and calibrations of the appliance are carried out by the
manufacturer or an authorised service centre,
•the mains power supply system complies with the applicable standards in this respect,
•the appliance is operated in accordance with the instructions given in
in this manual,
•the appliance is used in accordance with its intended use.
The manufacturer shall not be held liable for any consequences resulting
consequences of incorrect installation, improper use of the appliance, non-compliance with
the operating instructions and repairs carried out by unqualified persons.
Warning
There are no parts in the appliance that the user is allowed to replace
himself.
User manual Media monitor
Version 1.01 Page 5 of 21 Go to table of contents
3Safety of use
The module was designed with the latest electronic components, reflecting contemporary
trends in global electronic technology. Particular emphasis has been placed on guaranteeing
safety during use and the operational reliability of the control. The housing of the unit is
made of plastic of a high quality standard.
3.1 Storage, operating conditions
The device should be stored indoors where the atmosphere is free of vapours and corrosive
agents and:
•an ambient temperature of -30°C to +60°C,
•humidity between 25% and 90% (no condensation allowed)
•an atmospheric pressure of 700 to 1060hPa.
The unit is designed to operate under the following conditions:
•ambient temperature of -10°C to +55°C,
•humidity between 30% and 75%,
•atmospheric pressure of 700 to 1060hPa.
Recommended transport conditions:
•ambient temperature from -40°C to +85°C,
•humidity 5% to 95%,
•atmospheric pressure 700 to 1060hPa.
3.2 Installation and use of the modulemodułu
The module should be operated as recommended later in this manual.
3.3 Disposal and decommissioning
In the event that it becomes necessary to dispose of the unit (e.g. at the end of its useful
life), contact the manufacturer or the manufacturer's representative, who is obliged to
respond appropriately, i.e. to collect the unit from the user. The user may also contact
companies dealing with the disposal and/or decommissioning of electrical or computer
equipment. Under no circumstances should the appliance be placed with other waste.
4Purpose of the device
The Media Monitor module is used for monitoring and counting electrical impulses, resulting in
the monitoring of, for example: current consumption. It is equipped with four opto-isolated
inputs, allowing the connection of devices such as electricity meters, water meters or infrared
barriers. It allows remote access and control via LAN, using the built-in website or available
communication protocols.
User manual Media monitor
Version 1.01 Page 6 of 21 Go to table of contents
5Construction of the device
5.1 Technical data:
Power supply:
10-24 VDC (3.5mm screw connector) or passive PoE 10-24VDC
Power consumption: 1,5 W
Inputs:
4 opto-isolated binary inputs
Input type: optocoupler
Maximum input voltage 24V
LAN:
Ethernet 1x10Mbps, RJ45
The diagram of the binary input is shown in the figure below.
The input is designed for a DC input voltage of 10-24V.
Each input is protected by a reverse polarity protection diode
polarity.
User manual Media monitor
Version 1.01 Page 8 of 21 Go to table of contents
*Input connectors
1-2 - counter channel 1
3-4 - counter channel 2
5-6 - counter channel 3
7-8 - counter channel 4
Indicator lights:
Name
Description
POWER
supply of the module
LINK
active LAN connection indication
ACK
signalling active LAN connection
Dioda Power
Dioda Ack
Dioda Link
RESET button
Power input
AC/DC 10-24V
Input
connectors
*
User manual Media monitor
Version 1.01 Page 9 of 21 Go to table of contents
6Configuring the unit
On first start-up, it is necessary to configure the device. This can be done in 2 ways. The
simplest method is to use the Discoverer programme from Inveo.
6.1 Entering the module page via the Discoverer programme
Once you have enabled Discoverer and found the appropriate device, simply double-click to
open the device page in your browser.
6.2 Changing the subnet of the configuration computer
When configuring the device bypassing the Discoverer application, you must first change the
subnet address of the computer connected to the same network.
To do this, go to the network configuration of the computer:
•Press Win + R, type ncpa.cpl and press Enter,
OR
•Start → Control panel → Network and Internet → Network centre
and Sharing → Change network adapter settings.
Select your network connection, press the right mouse button and click Properties.
User manual Media monitor
Version 1.01 Page 10 of 21 Go to table of contents
Once selected, the configuration screen will appear:
Then select the "Internet Protocol (TCP/IP)" setting and enter the following parameters:
After accepting the settings with the OK button, start your web browser and enter the
address: 192.168.111.15. (Default user and password: admin/admin00).
In the Network tab it is possible to change the LAN parameters.
Changing the network configuration in WINDOWS
Examples of TCP/IP protocol settings
Tabla de contenidos
