INVENTOR EU-OSK105 Manual de usuario

ENGLISH | ΕΛΛΗΝΙΚΑ | ROMANA |

DEUTSCH | FRANÇAIS | ITALIANO | ESPAÑOL

• USER’S MANUAL

• ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΗΣ

• MANUAL UTILIZATORULUI

• BENUTZERHANDBUCH

• MANUEL D’UTILISATION

• MANUALE DELL’ UTENTE

• MANUAL DE USUARIO

Wi-Fi FUNCTION

DEHUMIDIFIERS

Wi-Fi

CONTENTS

1 SPECIFICATION..................................................4

2 PRECAUTIONS ...................................................4

3 DOWNLOAD AND INSTALL APP......................5

4 USER REGISTRATION ........................................6

5 NETWORK CONFIGURATION...........................7

6 HOW TO USE THE APP ....................................19

7 SPECIAL FUNCTIONS ......................................21

DECLARATION OF CONFORMITY

Hereby, we declare that this unit is in compliance

with the essential requirements and other relevant

provisions of Directive 2014/53/EU.

A copy of the full DoC is attached.

Model: EU-OSK105

Standard: IEEE 802. 11b/g/n Antenna Type: Printed PCB

Antenna

Frequency: 2400~2483.5 MHz

Operation Temperature: 0ºC~45ºC/32ºF~113ºF

Operation Humidity: 10%~85%

Power Input: DC 5V/300mA

Maximum Transmitted Power: <20dBm

2PRECAUTIONS

• Applicable system: iOS, Android.

(Suggested: iOS 9.0 or above, Android 6.0 or above)

- Please keep you APP up to date with the latest version.

- Due to special situation may be occurred, we explicitly

claims below: Not all of the Android and i OS system are

compatible with APP. We will not be responsible for any

issue as a result of the incompatibility.

• Wireless safety encryption

Supported Wi-Fi band: 2.4GHz

Smart kit only support WPA-PSK/WPA2-PSK encryption

and none encryption .

WPA- PSK/WPA2-PSK encryption is recommended.

• Cautions

- Due to different network situation, control process may

return time-out sometimes. If this situation occurs, the

display between board and App may not be the same,

please do not feel confused.

1SPECIFICATION

- Smart Phone camera needs to be 5 million pixels or

above to make sure scan QR code well.

- Due to different network situation , sometimes , request

time-out could happen, thus, it is necessary to do

network configuration again.

- The APP system is subject to update without prior

notice for product function improvement. The actual

network configuration process may be slightly different

from the manual, the actual process shall prevail.

- Please Check The Service Website For More information.

3DOWNLOAD AND INSTALL APP

CAUTION: The following QR Code is only for downloading

the APP. This is different from the QR code the SMART

KIT has on it.

Android iOS

• Android Phone users: scan Android QR code or go to

google play, search «Invmate II» app and download it.

• iOS users: scan iOS QR code or go to APP Store, search

«Invmate II» app and download it.

USER REGISTRATION

• Please ensure your mobile device is connected to Wi-Fi

router. Also, the Wireless router has already connected

to Internet before doing user registration and network

configuration.

• You can log in with the third party accounts.

2.Enter your email address

and password, and then

click «Registration»

1.Click «Sign up»

VI 5

USER REGISTRATION

Please ensure your mobile device is connected to

Wireless router. Also, the Wireless router has already

connected to Internet before doing user registration and

network configuration.

It is better to log in your email box and active your

registration account by clicking link in case you forget

the password. You can log in with the third party accounts.

1Click "Create Account

Android iOS

2Enter your email address

an d password, and then

cl ick " "Register

NETWORK CONFIGURATION

Cautions

• It is necessary to forget any other local / nearby

networks and make sure the Android or i OS device

is connected to the Wireless network you want to

configure.

• Make sure during the configuration to keep your

mobile data connection turned off

• Make sure the Android or i OS device Wireless function

works well and can be connected back to your original

Wireless network automatically.

Kind reminder:

User must finish all the steps in 8 minutes after powering

on AC, otherwise you need to power on it again.

■Add New Device

1. Make sure your mobile device has already been

connected to the Wireless network which you

want to use. Also, you need to forget other local /

nearby Wireless networks in case it influences your

configuration process.

2. Disconnect the power supply of the dehumidifier for

5 minutes.

3. Connect the power supply of the dehumidifier and

press and hold the «FILTER» button for more than 3

seconds (the required button might be different, kindly

advise the User Manual of your unit).

4. When the dehumidifier displays “AP”, it means that

the dehumidifier wireless has already entered into “AP”

Mode.

6.Select the appliance you

are setting up

5.Press “ + Add Device ”

Network configuration by Bluetooth scan

Note: Make sure the bluetooth of your mobile device is

working.

Press “ + Add Device ” Press “Scan for nearby

devices”

Choose the network

configuration method.

Choose the “ Scan the

QR code ” method. Sacn

the QR code on the unit.

NOTE: Steps 3 and 4 are applicable to Android system only. iOS system does not need

these two steps.

Please follow the above steps to enter “AP” mode.

Choose Method

Back

Scan QR code on the unit

Manual Setup

Note:Wait5-10 seconds while your device is in

AP mode before scanning the QR code.

Network configuration by select appliance type :

If the bluetooth network

cofiguration is failure, please

select the appliance type.

When choose the “Manual

Setup” method(Android).

Connect to the wireless

network(iOS)

Manually Add New Device:

7.Follow the above steps to enter “AP” mode.

please follow the above steps to enter “AP” mode.

Choose the network

configuration method.

Choose the “ Scan the

QR code ” method. Sacn

the QR code on the unit.

NOTE: Steps 3 and 4 are applicable to Android system only. iOS system does not need

these two steps.

Please follow the above steps to enter “AP” mode.

Choose Method

Back

Scan QR code on the unit

Manual Setup

Note:Wait5-10 seconds while your device is in

AP mode before scanning the QR code.

Network configuration by select appliance type :

If the bluetooth network

cofiguration is failure, please

select the appliance type.

When choose the “Manual

Setup” method(Android).

Connect to the wireless

network(iOS)

9a. Scan the QR code8.Choose the network

configuration method.

horizontal

Choose Method

9:4 1

Note:Wait5-10 seconds while your device is in

AP mode before scanning the QR code.

Manual Setup

Scan QR code on the unit

Choose the network

configuration method.

Choose the “Scan the

QR code” method.

NOTE: Steps and are applicable to Android

system only. iOS system does not need

these two steps.

Otros manuales para EU-OSK105

Tabla de contenidos

Otros manuales de Deshumidificador de INVENTOR

INVENTOR

INVENTOR K1-10L Manual de usuario

INVENTOR

INVENTOR DEI 10LT Manual de usuario

INVENTOR

INVENTOR DE-MDT10 Manual de usuario

INVENTOR

INVENTOR C2-10L Manual de usuario

INVENTOR

INVENTOR PR1-ION10L Manual de usuario

INVENTOR

INVENTOR C2-12L Manual de usuario

INVENTOR

INVENTOR EVP-WF20L Manual de usuario

INVENTOR

INVENTOR EP3-ION-10L Manual de usuario

INVENTOR

INVENTOR EP3-ION16L Manual de usuario

INVENTOR

INVENTOR E2-ION16L Manual de usuario

INVENTOR

INVENTOR K2-10LBS Manual de usuario

INVENTOR

INVENTOR DE-MDDT08 Manual de usuario

INVENTOR

INVENTOR C2-10L Manual de usuario

INVENTOR

INVENTOR PR1-30XL Manual de usuario

INVENTOR

INVENTOR P2 - WiFi25L Manual de usuario

INVENTOR

INVENTOR EVP-WF16L Manual de usuario

INVENTOR

INVENTOR PWR-50L Manual de usuario

INVENTOR

INVENTOR R2-ION8L Manual de usuario

INVENTOR

INVENTOR PRM-20L Manual de usuario

INVENTOR

INVENTOR RS-WUI-08L Manual de usuario

INVENTOR

INVENTOR PR-ION-20L Manual de usuario

INVENTOR

INVENTOR EV-IONF-16L Manual de usuario

INVENTOR

INVENTOR CF-ION-10L Manual de usuario

INVENTOR

INVENTOR DE-GDNM16 Manual de usuario

Manuales populares de Deshumidificador de otras marcas

Daitsu

Daitsu CD031IU-DFA Manual de usuario

Fehom

Fehom PDGT701BE Manual de usuario

Hitachi

Hitachi RD-190GX Manual de usuario

Westpoint

Westpoint MDF1-30AE Manual de usuario

SOLIS

SOLIS easy dry compact Manual de usuario

ENVIROBOSS

ENVIROBOSS EB240 Manual de usuario

Sinclair

Sinclair R-9112 Manual de usuario

Kenmore

Kenmore 580.54701 Manual de usuario

Demargo

Demargo DM828NF Manual de usuario

Altrad Lescha

Altrad Lescha LDH 600 Manual de usuario

BOMANN

BOMANN LE 1150 CB Manual de usuario

SPT

SPT SD-46 Manual de usuario

REMKO

REMKO SLN 40 Manual de usuario

Haier

Haier HD458 Manual de usuario

Logik

Logik L20DHW12 Manual de usuario

Frigidaire

Frigidaire FDR30S1 - 30 Pint Capacity Dehumidifier Guía de inicio rápido

Blitz

Blitz HHD Series Manual de usuario

Prem-I-Air

Prem-I-Air PD14DEN Manual de usuario