Invacare Rea Bellis Manual de usuario

Rea® Bellis

Manual

English

2REA® BELLIS

REA® BELLIS

Read the back cover of this user’s manual, which features

a number of points affecting your personal safety. Read it

carefully!

Invacare is only responsible for product changes carried

out by personnel who we authorise. We reserve the right

to make any changes to equipment and specications wit-

hout prior notice.

Rea® Bellis is a wheelchair with many adjustment options

and accessories. To ensure that you benet as much as

possible from Rea® Bellis, and in order to do its options

justice, the chair must be tested and adjusted by com-

petent personnel. We hope that you have also received

instructions for using your Rea Bellis in everyday life.

This manual includes a description of the parts of the

chair, simple adjustment options, how to use the Rea®

Bellis safely and how to transport it. The manual must be

read thoroughly before the chair is used.

Also included in this manual is a description of how all

accessories are tted and slightly more advanced settings.

As the Rea® Bellis has many different components and

accessories, the appearance of the accessories you have

for your chair may differ from those shown.

Check that all components match the delivery note. Any

transport damage must be reported immediately to the

transport company. Remember to keep the packaging until

the transport company has checked the goods and a sett-

lement has been reached.

Rea® Bellis

Delivery check

NB!

2REA® BELLIS

REA® BELLIS

Contents

Parts of the wheelchair 4

Standard equipment 5

Upholstery and frame colours 5

Accessories 5

Technical data – Rea Bellis 6

Assembly 7

Adjustments 9–20

Seat 9

Legrests/footrests 10

Footplates/calf pads 10

Central footplate 11

Backrest 13

Armrests 13

Seat unit 14

Manual chair with gas piston 14

Electrically operated chair 15

Rear wheels 16

Wheelchair heights 17

Frame extension 18

Brake 18

Carer-operated brake 19

Push handles/push bar 19

Anti-tip device 20

Transport 21–24

Transport of wheelchairs in vehicles 23

Observations 24

Restraint methods 25

Safety instructions/propelling techniques 26

Product description 28

Application 28

Guarantee 29

REA® BELLIS

Parts of the wheelchair

1. Backrest

2. Push bar

3. Armrest

4. Rear wheel

5. Rear wheel plate

6. Anti-tip device

7. Brake

8. Castor

9. Seat

10. Legrest/Footrest

11. Foot plate

Lifting the wheelchair

Only lift by the frame of the chair (as shown in the

diagram). This applies at all times, irrespective of whether

when the user is or is not seated in the chair. Never lift

the chair by the removable armrests or by the footrests.

Ensure that the backrest and push bar are properly

secured.

REA® BELLIS

Accessories

Standard equipment

Seat width: 39*– 41–43*cm

44*– 46–48*cm

49*– 51–53*cm

Seat depth: 40–52 cm

* with ip-up armrests (Nice)

Upholstery:

Green plush, "Strix"

Bordeaux plush

Grey dartex

Frame colours:

Dark blue RAL5013

Bordeaux CRED 2

Upholstery and frame colours

The Rea® Bellis has a wide range of accessories and options. Some of the accesso-

ries may not be available in certain countries.

Backrest Standard

Adjustable backrest

Seat Standard

Seat cushions Mistral

Seat and Carer-operated

backrest angle Electrical operated by carer/user

adjustment

Legrests Legrests (angle-adjustable)

Amputee legrests

Footrests

Fixed footplate

Angle-adjustable and depth-adjustable

Foot plate extender

Heel strap

Castors 120–200 mm, pneumatic or solid, wide or narrow

Rear wheels 16", 20", 22", 24", pneumatic or puncture-proof

Vortex operating unit

Brakes Carer-operated

User brake

One-arm brake

Foot brake

6REA® BELLIS REA® BELLIS 7

Others Several types of hand rim

Several types of spoke guard

Reectors Kit

Table Tray

Pump

Cane holder

Bag

Headrest

Neckrest

Push bar

Push handles brace

Pelvic Belt

Abduction cushion

Incontinence cover

41, 46, 51 cm 40 –52 cm 36 – 48,5 cm 52+7 cm 23–33 cm

29–51 cm -1°–+15° SW + 20,5 cm 110 cm 92–104 cm

32 kg max 125 kg*transport weight 20 kg

* Maximum user weight is 100 kg if the chair is tted with 100–120 mm castors.

**Our wheelchairs comply over and above ISO normal standards plus ISO 10542, which have additional features pro-

viding increased levels of occupant security and safety whilst travelling in a motor vehicle. Wheelchair users should

however transfer to the vehicle seat and use the vehicle installed restraint system whenever it is feasible.

Technical data – Rea® Bellis

Tie down point**

6REA® BELLIS REA® BELLIS 7

3a.

1. Backrest

The backrest is tted by angling it upwards out of

the seat and then inserting it into the attachment

as shown in the diagram.

Ensure that it “clicks” into the attachment

securely.

Assembly

2. Armrests

Fit the armrests by pushing the two tubes into the

holes on the armrest holder. The armrest is then

pushed down into the attachment (A).

3. Legrests/footrests

The wheelchair can be equipped with either

legrests or footrests.

3a Legrests

Attach the legrests by pushing the tube at the upper

part of the legrests down into the tubes on the

wheelchair. You must angle the legrests outwards

when inserting them.

Lock the legrests by turning them inwards. The

legrests are automatically locked so there is no

risk of them coming off the wheelchair.

REA® BELLIS

REA® BELLIS 9

3b.

4. Rear wheel

The rear wheel is tted by pressing button (B)

in the middle of the hub and keeping it pressed

in whilst inserting the axle into the rear wheel

attachment (C). It is important that the wheel is

tted into place correctly and that the lock catch

(D) really has locked the wheel securely.

It is very important that you check that

the locking pin has actually locked the

wheel into position when the centre

button has been released. Take hold of the

wheels and try to detach them. This should

NOT be possible.

3b Footrests

Attach the footrests by pushing the tube at the

upper part of the footrests down into the tubes

on the wheelchair. You must angle the footrests

outwards when inserting them.

Lock the footrests by turning them inwards. The

footrests are automatically locked so there is no

risk of them coming off the wheelchair.

REA® BELLIS

REA® BELLIS 9

1. Seat plate

The Rea Bellis has an anatomically designed seat

plate to provide proper stability and very good

seating comfort.

Adjustments

SEAT

2. Seat depth

Loosen the two screws at the legrest attachment

with a 5-mm Allen key and adjust the seat depth to

the desired position. Then retighten the screws.

3. Seat width

The width of the seat is adjusted by moving the side

supports. Pull the upholstery carefully to one side.

Loosen the two screws (A) with a 4-mm Allen key

and move the side supports to the desired posi-

tion. There are three positions: position 1 creates

a narrower chair and position 3 creates a wider

chair.

Tools: 4 mm Allen Key

Tools: 5 mm Allen Key

REA® BELLIS

REA® BELLIS 11

1–2.

FOOTRESTS/LEGRESTS

1. Angle-adjustable footplates

Adjust the angle and the depth by loosening the

screw (A) at the footplate attachment with a 5

mm Allen key. Adjust the footplate to the correct

position and retighten the screw.

Do not place anything on the footplate

when the screw is loose.

Other pin positions can be used if there is a

risk that the user could injure themselves, just

adjust the footplate to a more suitable posi-

tion,

2. Calf pads

The calf pads can be tted in four different depth

positions. Swing the pad forwards. Unscrew screw

(B) using an Allen key. Remove the large nut (C) on

the reverse side and place it in the other attach-

ment hole. Move the calf pad to the new position

and secure it into place with the screw.

The height of the calf pads can easily be adjusted

using the handwheel (D).

It is important to adjust the legrests, footrests and calf pads to obtain a good seating position.

1. Legrests height adjustment

Adjust the height of the legrests by loosening the

screw (A) one turn with an Allen key. Pull the leg-

rest until you have obtained the correct height

and the screw is caught by one of the recesses on

the legrest tube. Then retighten screw.

2. Legrests angle adjustment

The angle of the legrest is adjusted using the

handwheel (B).

Loosen the handwheel approx. one turn. The angle

can be set in intervals from 80° to 0°. Retighten the

handwheel when the correct angle is obtained.

The distance between the lowest part of the foot-

rest and the surface must be at least 40 mm.

FOOTPLATES/CALF PADS

3. Footrests height adjustment

Adjust the height in the same way as the legrests

above.

NOTE! Don't touch the upper screw (C).

The distance between the lowest part of the foot-

rest and the surface must be at least 40 mm.

Tools: 5 mm Allen Key

Otros manuales para rea Bellis

Tabla de contenidos

Otros manuales de Silla de ruedas de Invacare

Invacare

Invacare NX Manual de usuario

Invacare

Invacare Atlas Lite Manual de usuario

Invacare

Invacare Mirage Manual de usuario

Invacare

Invacare Motion Concepts Ultra Low Maxx Manual de funcionamiento

Invacare

Invacare 705 Instrucciones de montaje

Invacare

Invacare AVIVA RX Series Manual de usuario

Invacare

Invacare TDX SP2 series Manual de usuario

Invacare

Invacare Allegro Manual de usuario

Invacare

Invacare Variance Plus Guía

Invacare

Invacare At'm Manual

Invacare

Invacare Top End Everyday Series Manual de usuario

Invacare

Invacare Tracer 9000 Manual de usuario

Invacare

Invacare Cushion Rigidizer Manual de usuario

Invacare

Invacare Action 1 R Manual de usuario

Invacare

Invacare AVIVA FX Series Manual de usuario

Invacare

Invacare Power TigerTM Manual de instrucciones

Invacare

Invacare A-6 Manual de instrucciones

Invacare

Invacare Zipper 2 Manual de usuario

Invacare

Invacare 01-349 Manual de usuario

Invacare

Invacare A-4 Series Manual de instrucciones

Invacare

Invacare Aquatec Pico Manual de usuario

Invacare

Invacare Compass XE Manual de usuario

Invacare

Invacare Blade Plus Manual de usuario

Invacare

Invacare Comet Manual de usuario

Manuales populares de Silla de ruedas de otras marcas

Otto Bock

Otto Bock Skippi plus Manual de usuario

SORG

SORG LoopSORG 802 Manual de usuario

Designability

Designability WizzyBug Instrucciones de instalación

Vermeiren

Vermeiren RAPIDO Manual de usuario

Excel

Excel G5 KIDS 0285 Manual de usuario

M. Bartels

M. Bartels SA-3 Manual de usuario

nino robotics

nino robotics NIno Manual de usuario

Vermeiren

Vermeiren Turios Manual de usuario

Nova

Nova TKW-12 Manual de usuario

BCW

BCW Advantage Manual de usuario

You-Q

You-Q Luca Manual de usuario

interco

interco Ortolight Standard Manual de instrucciones

Nova

Nova 7190L Manual de usuario

Vermeiren

Vermeiren EZ1 Manual de usuario

PaceSaver

PaceSaver Scout M-300 Manual de usuario

Drive Medical

Drive Medical Silver Sport SSP218DDA-SF Manual de usuario

Rehadapt

Rehadapt Light 3D Manual de usuario

Excel

Excel Mobil Manual de usuario

Invacare rea Bellis Manual de usuario

Manuales populares de Silla de ruedas de otras marcas