INTEZZE EVO Manual de usuario
USER MANUAL
EVO
TWS EARPHONES
EN
Earphone description
1) USB-C charging connector
2) Charging LED indicator
3) Touch control area
4) LED indicator on the earphones
5) Charging pins
6) Microphone
EN
ON/OFF
ATTENTION! Fully charge the earphones together with the case prior to first use.
1) The earphones automatically switch on and off when opening/closing the
charging case.
2) You can switch on the earphones manually by holding the touch area for
approx. 3 seconds (switch off by holding for approx. 5 s).
3) The earphones automatically switch off when they are not connected to
any device for 5 minutes. Automatic switch off is also activated when the
earphones are fully discharged.
Pairing
It is necessary to pair the earphones with every device you want to use them
with, prior to their first use with the device. Pairing does not have to be
performed again and the earphones automatically try to connect to any
previously paired devices within range.
1) Open the earphone case and wait for approx. 5 seconds before earphone
pairing mode is activated.
2) Select “Intezze EVO” from the available BT devices on your phone and
select Connect (if necessary, confirm the intention to pair the earphones).
EN
Operation
Function Command (L = left earphone, R = right earphone)
Switch ON/OFF Hold both touch areas for 3/5 seconds
PLAY/Pause Double tap the L/R touch area
Previous track Hold the L touch area for 2 seconds
Next track Hold the R touch area for 2 seconds
Volume UP Tap the R touch area
Volume DOWN Tap the L touch area
Phone calls
Answering a call Double tap the L/R touch area quickly
Ending a call Double tap the L/R touch area quickly
Rejecting a call Hold the L/R touch area for approx. 2 seconds
Charging
Charging the earphones
After inserting the earphones into the case, automatic charging is activated. The
case must be sufficiently charged.
Case charging
Use the supplied USB-C cable to charge the case. Fully charge the earphones
together with the case prior to first use.
EN
Pairing one earphone (MONO)
In order to listen with only one earphone, pair both earphones with the phone
first. Then insert both earphones back into the case and remove only the
earphone that you want to use.
RESET function
1) Delete “Intezze EVO” from the list of paired devices on the phone.
2) Remove both earphones from the case and switch them off by holding the
touch areas for approx. 5 seconds.
3) Switch on the earphones by holding the touch areas for 3 seconds. Tap
both touch areas 4 times and after the 4th tap, hold the touch area for 5
seconds.
4) This will reset the earphones. Now switch on the earphones again and
repeat the pairing process with the phone.
EN
LED indication on the case
Case charge status (after opening the case lid):
● ○ ○ ○ < 25 %
● ● ○ ○ 25 % - 50 %
● ● ● ○ 50 % - 75 %
● ● ● ● 75 % - 100 %
Earphone charge status (briefly after closing the case lid):
● ○ ○ ● Charging in progress
○ ○ ○ ○ Charging complete/fully charged
Caution
1) Fully charge the case together with the earphones prior to first use.
2) If you do not use the earphones for a longer period, charge them together
with the case approx. once a month so that the battery life is not
shortened.
3) Keep the set volume at the lowest possible level. Listening to loud volumes
for an extended period may damage your hearing irreversibly!
4) Children must be supervised by an adult when using the earphones. Risk of
swallowing small parts.
EN
5) Do not expose the earphones to water for extended periods. The
earphones are not designed for swimming, showering, or diving.
6) Using the earphones in a very dusty or humid environment may result in
damage to the earphones.
7) Do not use the earphones out of the allowed temperature range of -15 °C
to +40 °C.
8) Do not charge the case or earphones in places with a temperature lower
than 0 °C.
9) Do not expose the earphones or case to direct sunlight for extended
periods.
10) Never disassemble or otherwise repair the earphones yourself.
11) Keep the earphone grille clean. If it is heavily clogged, the sound may be
muffled. Cleaning/replacing the grille may only be performed by a
professional service provider.
12) Only use a slightly damp cloth to clean the grille.
EN
Warranty conditions
The warranty does not cover the following types of defects:
1. Damage caused by tampering with the device.
2. Physical damage to the earphones caused by a fall or impact.
3. Damage caused by force majeure.
Content subject to change
www.intezze.com
Návod k obsluze
EVO
TWS EARPHONES
CZ
Popis sluchátek
1) Nabíjecí konektor USB-C
2) LED indikace nabíjení
3) Ploška dotykového ovládání
4) LED indikace na sluchátku
5) Nabíjecí piny
6) Mikrofon
Tabla de contenidos
Idiomas:
Otros manuales de Auriculares de INTEZZE
INTEZZE
INTEZZE MOVE Manual de usuario
INTEZZE
INTEZZE ZEUS Manual de usuario
INTEZZE
INTEZZE ALPHA Manual de usuario
INTEZZE
INTEZZE MINI Instrucciones de funcionamiento
INTEZZE
INTEZZE TRIQ Instrucciones de funcionamiento
INTEZZE
INTEZZE CLIQ Manual de usuario
INTEZZE
INTEZZE CLIQ Manual de usuario
INTEZZE
INTEZZE TRIQ+ Instrucciones de funcionamiento
INTEZZE
INTEZZE GO ANC Manual de usuario
INTEZZE
INTEZZE CUBE Instrucciones de funcionamiento
