Interpack HSD2000 ET II RC Manual de usuario
1
HSD2000 ET II RC
RipCord™ Tape Head
OPERATION MANUAL & PARTS LISTS
2” (48mm) & 3” (72mm)
This Manual Covers Tape Heads with the Serial Numbers Starting with:
H175R or H675R
For All Other Numbers, Please Contact Customer Service @ 800-474-8273
2
3
TABLE OF CONTENTS
Section 1 Table Of Contents--------------------------------------------- 3
Section 2 Technical Assistance----------------------------------------- 4
Section 3 Warranty--------------------------------------------------------- 5
Section 4 Description Of Tape Head----------------------------------- 6
Section 5 Safety Issues--------------------------------------------------- 7
Section 6 Specifications--------------------------------------------------- 10
Tape Head Dimensions-------------------------------------- 10
Tape Head Components------------------------------------- 11
Tape Head Specifications----------------------------------- 12
Installation In Other Machinery----------------------------- 13
Section 7 Set Up Procedures-------------------------------------------- 14
Mounting Adapters-------------------------------------------- 15
Tape Loading--------------------------------------------------- 16
Tape Threading------------------------------------------------ 17
Ripcord™ Shaft Adjustment-------------------------------- 19
Ripcord™ Threading----------------------------------------- 20
Tape Centering------------------------------------------------ 21
Tape Leg Length Adjustment------------------------------ 22
One Way Clutched Roller Adjustment------------------- 23
Main Spring Adjustment------------------------------------- 23
Mandrel Tension Adjustment------------------------------- 24
RipCord™ Shaft Tension Adjustment-------------------- 25
Section 8 Troubleshooting----------------------------------------------- 26
Section 9 Recommended Spare Parts List-------------------------- 29
Section 10 Preventive Maintenance------------------------------------ 31
Knife Blade Replacement----------------------------------- 31
RipCord™ Rotary Blade Replacement------------------ 32
Oiler Pad Lubrication----------------------------------------- 33
Urethane Wipe Down Roller Replacement------------- 34
Spring Replacements---------------------------------------- 35
Wipe Down Brush Replacement-------------------------- 42
Schedule Of Preventive Maintenance------------------- 43
Section 11 Appendix A-Illustrations And Parts Lists---------------- 44
4
TECHNICAL ASSISTANCE
Technical Support
This is the Interpack Model HSD 2000-ET II RC Series Tape Head you ordered. It has been set
up and tested in our factory with Intertape brand tapes and RipCord™ thread. If any problems
occur when setting up or operating this equipment, please contact the authorized distributor
from where you purchased this item.
If contact with the authorized distributor is not possible, Interpack Technical Support is
available. Should the need to contact Interpack Technical Support arise, please have the
Tape Head model number and serial number on hand. This information can be found on the
nameplate of the side panel of the Tape Head. Interpack Technical Support is available during
normal business hours (Eastern Time).
PHONE 800-474-8273 Option 3
If you have a technical question that does not require an immediate response, you may contact
Interpack by fax.
FAX 800-462-1293
Replacement Parts
Order parts by item number, part description and quantity required. Replacement parts are
available from your Authorized Interpack Distributor exclusively.
Should you require assistance selecting the correct part, you may call:
Intertape Polymer Group
Interpack Machinery
Tel: 1-800-474-8273 Option 3
Fax: 1-800-462-1293
MODEL:
SERIAL NUMBER:
DISTRIBUTOR PURCHASED FROM:
DATE OF PURCHASE:
5
WARRANTY
EQUIPMENT WARRANTY AND LIMITED REMEDY: The following warranty is made in lieu of all other
warranties, express or implied, including, but not limited to, the implied warranty of
merchantability, the implied warranty of fitness for a particular purpose, and any implied
warranty arising out of a course of dealing, a custom or usage of trade:
Intertape sells its Interpack Tape Heads, Case Tapers and Case Erectors with the following warranties:
1. The HSD
2000 Tape Heads' knife blades, springs and wipe down rollers will be free from all
defects for a period of ninety (90) days.
2. All other HSD2000 Tape Head parts will be free from all defects for one (1) year after delivery.
3. Water Activated Tapers’ blades and brushes will be free from defects for ninety (90) days after
delivery
4. Drive Belts will be free from defects for ninety (90) days after delivery
5. The Gear Motors will be free from defects for one (1) year after delivery.
6. All other components will be free from defects for one (1) year after delivery.
If any part is proven defective within its warranty period, then the exclusive remedy and
Intertape's and the seller's sole obligation shall be, at Intertype’s option, to repair or replace the
part, provided the defective part is returned immediately to Intertape's factory or an authorized
service station designated by Intertape.
A part will be presumed to have become defective after its warranty period unless the part is
received or Intertape is notified of the problem no later than five (5) calendar days after the
warranty period.
If Intertape is unable to repair or replace the part within a reasonable time, then Intertape, at its
option, will replace the equipment or refund the purchase price. Intertape shall have no
obligation to install the repaired or replacement part.
Intertape shall have no obligation to provide or pay for the labor required to install the repaired
or replacement part. Intertape shall have no obligation to repair or replace (1) those parts failing
due to: operator misuse, carelessness, or due to any accidental cause other than equipment
failure, or (2) parts
1. Failure or damage is due to misapplication, lack of proper maintenance, abuse,
improper installation or abnormal conditions such as temperature, moisture, dirt
or corrosive matter, etc.
2. Failure due to inadequate cleaning, improper operating environment, improper
utilities or operator error.
3. Failure due to operations above the rated capacities, or in any other improper
manner, either intentional or otherwise.
4. Failure is due to equipment, which has been altered by anyone other than an
authorized representative of Intertape Polymer Group.
5. Failure is due to an attempt by the purchaser to correct alleged defective
equipment. In this event the purchaser is responsible for all expenses incurred.
LIMITATION OF LIABILITY: Intertape and seller shall not be liable for direct, indirect, special,
incidental or consequential damages based upon breach of warranty, breach of contract,
negligence, strict liability or any other legal theory.
The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability may be
changed only by written agreement signed by authorized officers of Intertape and seller.
6
DESCRIPTION OF TAPE HEAD
Figure 1-1
The Intertape HSD 2000-ET II RC Family of Tape Heads are designed to apply Intertape brand
pressure sensitive carton sealing tape and RipCord™ thread to the top center seam of regular
slotted corrugated cartons and Intertape brand pressure sensitive carton sealing tape to the
bottom center seam of regular slotted corrugated cartons.
7
SAFETY ISSUES
There is a safety label used on all Interpack Tape Heads. This label is placed on the Tape
Head knife guard to warn operators and service personnel of the sharp cutting edge of the
blade. Please read the label and the following safety precautions before using the Tape Head.
Read this manual for other important safety operating and service information.
Only trained personnel are to operate and service Tape Head.
Wear safety glasses.
Shut off power to machine before adjusting.
Unplug electrical power before servicing.
All covers and guards must be in place before operating.
Stay clear of moving parts which can shear and cut.
Never operate the Tape Heads with the Knife Guard removed.
Turn electrical supply off before servicing the Tape Heads, including tape loading
and threading.
Note: Should any of the safety labels placed on the Tape Head be
damaged or destroyed, replacements are available.
8
S
AFETY
I
SSUES
The illustrated label shown in Figure 2-1 is attached
to the Knife Guard. The label warns operators and
service personnel of the very sharp blade. The guard
shall only be removed when the torsion spring or the
guard itself are being replaced.
Should the tape head be operated without blade
guard, user voids all warranty implied, the
manufacturer bears no responsibility for the
consequences.
Tape head shall never be serviced while mounted in a
machine.
Figure 2-1
Label on Figure 2-2 is visible on carton sealing
machine.
Figure 2-2
While the tape head is processing cartons, or it is in
motion, keep your hands away (Figure 2-3).
Figure 2-3
9
SAFETY ISSUES
The illustrated label shown in Figure 2-4 is attached to
the operator side plate of each tape head. The label
provides operators and service personnel the proper
method of threading a new roll of tape through the tape
head.
More detailed information is provided in the “Set Up
Procedures” portion of this manual.
Turn air and electrical supplies off before servicing
the tape heads.
Figure 2-4
10
SPECIFICATIONS
Tape Head Dimensions
Figure 3-1
Front View
Otros manuales para HSD2000 ET II RC
1
Tabla de contenidos
Otros manuales de Ahorrador de alimentos de Interpack
