Intermec CT60 Manual de usuario
CT60
Rugged
Tablet PC
User's Guide
CT60
Rugged
Tablet PC
User Guide
ii
Intermec Technologies Corporation
Corporate Headquarters Technical Communications
Department
6001 36th Ave. W. 550 Second Street SE
Everett, WA 98203 Cedar Rapids, IA 52401
U.S.A. U.S.A.
www.intermec.com
The information contained herein is proprietary and is provided
solely for the purpose of allowing customers to operate and
service Intermec-manufactured equipment and is not to be
released, reproduced, or used for any other purpose without
written permission of Intermec.
Information and specifications contained in this document are
subject to change without prior notice and do not represent a
commitment on the part of Intermec Technologies Corporation.
E2003 by Intermec Technologies Corporation. All rights re-
served.
The word Intermec, the Intermec logo, Norand, ArciTech,
CrossBar, Data Collection Browser, dcBrowser, Duratherm,
EasyCoder, EasyLAN, Enterprise Wireless LAN, EZBuilder,
Fingerprint, i-gistics, INCA (under license), InterDriver,
Intermec Printer Network Manager, IRL, JANUS, LabelShop,
Mobile Framework, MobileLAN, Nor*Ware, Pen*Key, Precision
Print, PrintSet, RoutePower, TE 2000, Trakker Antares, UAP,
Universal Access Point, and Virtual Wedge are either trademarks
or registered trademarks of Intermec Technologies Corporation.
Throughout this manual, trademarked names may be used.
Rather than put a trademark (or )symbolinevery
occurrence of a trademarked name, we state that we are using the
names only in an editorial fashion, and to the benefit of the
trademark owner, with no intention of infringement.
There are U.S. and foreign patents pending.
Contents
iiiCT60 Rugged Tablet PC User’s Guide
Contents
Before You Begin vii...............................
Introduction 1.....................................
Standard Features 2...............................
Accessories and Options 3..........................
Exterior Features 4................................
Battery Gauge: 4..........................
Charging status LED: 4.....................
Hard disk Drive Indicator: 4.................
Backlight Control Sensor: 5..................
On/Off Switch: 5....................
USB Connector: 5....................
Cardbus/PCMCIA Expansion Slot 6......
Speaker: 6..........................
External Power Connector (15 VDC input): 7
Coaxial Connector: 7..................
Docking Connector: 7.................
Battery Compartments: 7..............
Hard Drive Compartment: 8............
Bottom Guide Pin Holes: 8.............
Tips for Proper Use and Care 9.................
1
Contents
iv CT60 Rugged Tablet PC User’s Guide
Hardware Operation 11....................
Turning on the CT60 12.......................
Pen Operations 12.....................
Battery Use and Care 14.......................
New Batteries 14......................
How to Install New Batteries 14..........
When to Recharge Batteries 14...........
How to Recharge Your Batteries 15........
When Batteries Have Finished Charging 16.
How to Increase Battery Run Time 16.....
When to Replace Your Battery 17.........
Where to Purchase Replacement Batteries 17
Safety and Handling for Batteries 18.......
Disposing of Batteries 19................
Tips for Best Battery Performance 25......
Removable Hard Drive 20......................
Connectivity 20..............................
Port Replicators 21............................
Desktop Docking Station 24....................
Vehicle Docking 25...........................
Cardbus/PC Cards 26.........................
Internal Flex Space for OEM modules 27...
2
Contents
vCT60 Rugged Tablet PC User’s Guide
Software Operation 29......................
Windows XP Tablet PC Edition 30...............
Tablet and Pen Settings 30...............
Screen Rotation 30.............
Adjusting Screen Brightness 32....
When Should I Calibrate the Pen? 32
Handwriting Using the Input Panel 33.....
How to Open the Input Panel 33..
How to Convert Handwriting 34..
Handwriting Using Microsoft Journal 34...
How to Access Windows Journal 34
Restore the Default Settings 34...
Reinstall the Note Writer Printer 35
Improve Handwriting Recognition 36
How to Set the Pen and Screen 36.
How to Create “Sticky Notes” 36..
Use the Pen to Write 37.........
Speech Recognition 37.................
Performance and Maintenance 37.........
Monitoring Your Battery 37......
Turning Off Peripherals 38.......
Using Power Schemes 38.........
Standby 39...................
Hibernation 39................
CT60 Utilities 40............................
Manual Brightness Adjustment 40.........
Auto Backlight Settings 40.......
Side Button Function 40.........
Advanced Backlight 41..........
Backlight Adjustment 41.........
Auto Dim 42..................
3
Contents
vi CT60 Rugged Tablet PC User’s Guide
FAQs 45.......................................
What Software Options are Available? 48...
Installing Device Drivers Sold by Intermec? 48
How Do I Activate the “Screen Keyboard”? 48
Disabling Hand Writer Recognition? 49....
If the Computer Locks Up or Freezes 49...
How Do I Clean the Dock Connector ? 49..
How Do I Clean the Glass? 49...........
If the Pen Gets Out of Alignment? 49......
What if the Pen Still Will Not Align? 47....
If the “ Start” Button Disappears? 48.......
External Peripherals Support? 49..........
USB Networking In the CT60? 50........
How Can USB be Used In the CT60? 50...
4
Before You Begin
viiCT60 Rugged Tablet PC User’s Guide
Before You Begin
This section provides you with safety information, techni-
cal support information, and sources for additional product
information.
Safety Summary
Your safety is extremely important. Read and follow all warnings
and cautions in this document before handling and operating
Intermec equipment. You can be seriously injured, and equip-
ment and data can be damaged if you do not follow the safety
warnings and cautions.
Donotrepairoradjustalone
Do not repair or adjust energized equipment alone under any
circumstances. Someone capable of providing first aid must al-
ways be present for your safety.
First aid
Always obtain first aid or medical attention immediately after an
injury. Never neglect an injury, no matter how slight it seems.
Resuscitation
Begin resuscitation immediately if someone is injured and stops
breathing. Any delay could result in death. To work on or near
high voltage, you should be familiar with approved industrial
first aid methods.
Energized equipment
Never work on energized equipment unless authorized by a re-
sponsible authority. Energized electrical equipment is dangerous.
Electrical shock from energized equipment can cause death. If
you must perform authorized emergency work on energized
equipment, be sure that you comply strictly with approved safe-
ty regulations.
Before You Begin
viii CT60 Rugged Tablet PC User’s Guide
Safety Icons
This section explains how to identify and understand dangers,
warnings, cautions, and notes that are in this guide. You may
also see icons that tell you when to follow ESD procedures and
when to take special precautions for handling optical parts.
A warning alerts you of an operating procedure,
practice, condition, or statement that must be
strictly observed to avoid death or serious injury
to the persons working on the equipment.
Avertissement: Un avertissement vous avertit d’une
procédure de fonctionnement, d’une méthode,
d’un état ou d’un rapport qui doit être strictement
respecté pour éviter l’occurrence de mort ou de
blessuresgravesauxpersonnesmanupulant
l’équipement.
A caution alerts you to an operating procedure,
practice, condition, or statement that must be
strictly observed to prevent equipment damage or
destruction, or corruption or loss of data.
Attention: Une précaution vous avertit d’une
procédure de fonctionnement, d’une méthode,
d’un état ou d’un rapport qui doit être strictement
respecté pour empêcher l’endommagement ou la
destruction de l’équipement, ou l’altération ou la
pertededonnées.
Note: Notes either provide extra information about a
topic or contain special instructions for handling a
particular condition or set of circumstances.
Before You Begin
ixCT60 Rugged Tablet PC User’s Guide
Global Services and Support
Warranty Information
To understand the warranty for your Intermec product, visit the
Intermec web site at http://www.intermec.com, click Support,
and then click Warranty.
Disclaimerofwarranties:Thesamplecodeincludedinthisdoc-
ument is presented for reference only. The code does not neces-
sarily represent complete, tested programs. The code is provided
“as is with all faults.” All warranties are expressly disclaimed,
including the implied warranties of merchantability and fitness
for a particular purpose.
Web Support
Visit the Intermec web site at http://www.intermec.com to
download many of our current manuals in PDF format. To or-
der printed versions of the Intermec manuals, contact your local
Intermec representative or distributor.
Visit the Intermec technical knowledge base (Knowledge Cen-
tral) at http://intermec.custhelp.com to review technical infor-
mation or to request technical support for your Intermec prod-
uct.
Otros manuales para CT60
3
Tabla de contenidos
Otros manuales de Tableta de Intermec
