Intermec EasyCoder 4100 Manual de usuario

User’s

Manual

4100 Bar Code Label Printer

P/N 057713-005

4100 Bar Code Label Printer User's Manual

Helvitica condensed 9 pt italic

Code 39 18 pt

Intermec® Corporation

6001 36th Avenue West

P.O. Box 4280

Everett, WA 98203-9280

U.S. technical and service support: 1-800-755-5505

U.S. media supplies ordering information: 1-800-227-9947

Canadian technical and service support: 1-800-688-7043

Canadian media supplies ordering information: 1-800-268-6936

Outside U.S. and Canada: Contact your local Intermec service supplier.

The information contained herein is proprietary and is provided solely for the purpose of allowing

customers to operate and/or service Intermec manufactured equipment and is not to be released,

reproduced, or used for any other purpose without written permission of Intermec.

Information and specifications in this manual are subject to change without notice.

The word Intermec, the Intermec logo, Duratran, and CrossBar are trademarks of Intermec Corporation.

The name Centronics is wholy owned by GENICOM Corporation.

IBM is a registered trademark of International Business Machines Corporation.

Throughout this manual, trademarked names may be used. Rather than put a trademark (TM) symbol in

every occurrence of a trademarked name, we state that we are using the names only in an editorial

fashion, and to the benefit of the trademark owner, with no intention of infringement.

iii

Helvitica condensed 9 pt italic

Code 39 18 pt

Contributors

Author Lori Austin

Mia Hayashida

Editor Craig Thompson

Technical Illustrators John Bickley

Karen Petruzzi

Technical Reviewers Scott Bale

Dzung Dang

Jim Davison

Terry Ho

Jaye Jarchow

Ed Millet

Lisa Morin

Mark Rasmussen

4100 Bar Code Label Printer User's Manual

Helvitica condensed 9 pt italic

Code 39 18 pt

Manual Change Record

This page records the changes to this manual. The manual was originally released as version 001.

Version Date Description of Change

B 12/92 Added an addendum describing new features of ribbon save and the

cutter.

001 2/93 Incorporated addendum and added the cut option. Added a new label

that can be downloaded to the printer.

002 8/93 Chapter 7 was reformatted to make it easier to use. Chapter 8 was made

to be a universal printer reference guide. Commands that are not

compatible with the 4100 printer are noted. Small changes were made to

the appendix.

003 10/93 Firmware version 2.3 addendum added to the manual. The changes were

made to the communications protocols and the configuration commands

such as end-of-print skip distance and the label rest point.

004 10/94 Manual updated to reflect the current style guide. A new file called

4100u-fr.pm4 was added. It contains all of the front matter that was

previously included in Chapter 1. What used to be Chapter 2 is now

Chapter 1, and so forth. There is no longer a Chapter 8. Firmware

version 2.4 information added to the manual. The new information

includes:

Image before print command

HIBC Code 128

New Code 128 selection to ignore brackets and spaces

Label rest location range expanded to +/-30

Top of form adjust range expanded to -10 to 4000

Reimage only changed fields

Test and Service DIP switch settable functions

Different sensitivity number for DT and TTR

005 6/95 Page numbers added to the printer command tables in Chapter 7 and

several command descriptions corrected. New cable diagrams added to

Chapter 2.

Helvitica condensed 9 pt italic

Code 39 18 pt

Contents

Before You Begin xix

Warranty Information xix

Safety Summary xix

Warnings and Cautions xx

About This Manual xxi

Customer Advisory xxiii

Getting Started

Introduction to the 4100 Printer 1-3

Printing Capabilities 1-3

Printer Components 1-4

Printer Component Descriptions (Front View) 1-5

Printer Component Descriptions (Front Interior) 1-7

Printer Component Descriptions (Rear View) 1-9

Printer Component Descriptions (Mechanism Detail) 1-11

Printer Options 1-12

Ribbon Save 1-12

Cutter 1-12

Unpacking the 4100 1-13

Checking the Order for Completeness 1-13

Reporting Damage or Defects 1-13

Installing the Front Panel Cover 1-14

Preparing the Printer for Installation 1-14

Plugging in the Printer 1-14

Checking the DIP Switch Settings 1-15

Opening the Printer 1-15

Loading Media 1-15

4100 Bar Code Label Printer User's Manual

Helvitica condensed 9 pt italic

Code 39 18 pt

If You Have Difficulty Feeding the Media 1-17

Printing Configuration Test Labels 1-18

What the Configuration Test Labels Tell You 1-18

Installing the Printer

About Printer Installation 2-3

Preparing for Installation 2-3

Situating the Printer 2-4

Connecting the Printer to the Host 2-4

Default (Point-to-Point) Installation 2-4

About Network Installations 2-5

Modem Installation Procedure 2-7

Configuring the Serial Port 2-8

Serial Port Settings 2-8

DIP Switch Settings 2-9

Connecting the Printer to a Network 2-10

Host Requirements 2-10

Communication Boundaries 2-10

Communication Protocols 2-10

Intermec “Standard” Protocol 2-11

Polling Mode D Protocol 2-12

Multi-Drop Protocol 2-12

XON/XOFF Protocol (Software and Hardware / Flow Control) 2-12

Ready/Busy Protocol 2-13

User-Defined Protocol 2-13

Communication Interfaces 2-14

RS-232C Serial Interface 2-15

RS-485 Serial Interface 2-16

RS-422 Serial Interface 2-17

Printer Serial Port 2-17

vii

Helvitica condensed 9 pt italic

Code 39 18 pt

Contents

Choosing the Correct Cable 2-17

Intermec Cables 2-18

Cable Schematics 2-18

RS-485 (Multi-Drop) Cables 2-20

Cabling Considerations in Noisy Electrical Environments 2-20

Operating the Printer

About Printer Operation 3-3

Opening and Closing the Printer 3-3

Opening the Printer 3-4

Closing the Printer 3-4

Using the Front Control Panel 3-4

Loading Media Into the Printer 3-5

Straight-Through Printing 3-6

Self-Strip Printing 3-8

Repositioning the Tear-Off Plate Before Printing 3-8

Loading the Media 3-8

Batch Take-Up Printing 3-10

Installing the Rewind Adapter Before Printing 3-10

Loading the Media 3-11

Fanfold Printing 3-12

Adjusting the Label Gap Sensor 3-13

Adjusting the Label Gap Sensor for Die Cut Media 3-14

Adjusting the Label Gap Sensor for Tag Stock 3-14

Setting Media Sensitivity 3-14

Setting the Approximate Sensitivity Rating for Your Media 3-15

Fine-Tuning the Sensitivity Rating 3-15

viii

4100 Bar Code Label Printer User's Manual

Helvitica condensed 9 pt italic

Code 39 18 pt

Loading the Thermal Transfer Ribbon 3-17

Image Band Setting 3-18

How the Image Bands Command works 3-18

Optimizing the Number of Image Bands 3-18

Modified Field Reimaging 3-19

Printing Labels 3-20

Routine Maintenance

About Printer Maintenance 4-3

Safety Precautions 4-3

Inspecting the Printer 4-4

Components You Should Maintain 4-5

Lubrication 4-6

Cleaning the Printer 4-6

Cleaning the Drive Roller 4-6

Cleaning the Media Path 4-7

Cleaning the Printer Case 4-7

Cleaning the Printhead 4-8

Cleaning the Cutter Blades 4-9

Adjusting the Printhead Support 4-10

Adjusting the Printhead Alignment 4-11

Replacing the Cutter Blade 4-13

Replacing the Fuse 4-17

Helvitica condensed 9 pt italic

Code 39 18 pt

Contents

Troubleshooting

About Troubleshooting 5-3

Troubleshooting Checklist 5-3

Printer Operation Problems 5-4

Print Quality Problems 5-5

Communication Problems 5-6

Error Handling 5-6

Syntax Errors 5-6

Parameter Errors 5-6

Image Overrun Errors 5-7

Invalid Numeric Character Errors 5-7

Insufficient Storage RAM Errors 5-7

Error Codes 5-8

Using Test and Service Mode 5-10

Printing Test Labels 5-12

Using Data Line Print 5-12

Performing Cloning 5-13

Performing Selective Transfer 5-14

Using Memory Reset 5-15

Changing Configuration Commands in Test and Service Mode 5-16

Setting the Number of Dot Increments 5-17

Adjusting the Label Rest Point 5-18

Using 86XX Emulation Mode 5-19

Forms Adjust 5-21

Setting the X Forms Adjust 5-22

Setting the Y Forms Adjust 5-23

Using Test and Service Mode Commands 5-24

4100 Bar Code Label Printer User's Manual

Helvitica condensed 9 pt italic

Code 39 18 pt

Designing Labels and Using Commands

Introduction to Label Design 6-3

Using Label Formats 6-3

Communicating With the Printer 6-6

Using Intermec Label Design Software 6-6

Using the Printer Command Set 6-6

Downloading Printer Commands Using DOS 6-6

Using a Text Editor or Word Processor to Create Your Label 6-7

Downloading Printer Commands Using PC Communications

Programs or Host Terminals 6-8

Switching Between Print Mode and Program Mode 6-9

Creating Label Design Components 6-9

Different Kinds of Fields 6-10

About Bar Code Symbologies 6-10

Character Fields and Fonts 6-14

User-Defined Fonts 6-15

Downloading Fonts 6-16

Lines and Boxes 6-17

Graphics 6-18

One Bit Per Byte 6-18

Downloading One Bit Per Byte Graphics 6-19

Diamond Graphic 6-20

Six Bits Per Byte 6-20

Editing Labels and Working With Fields 6-22

Editing Labels 6-22

Deleting Fields 6-23

Scaling Fields 6-23

Magnifying Fonts and Character Fields 6-23

Magnifying Bar Code Fields 6-24

Positioning Fields 6-24

Tabla de contenidos

Otros manuales de Impresora de Intermec

Intermec

Intermec EasyCoder 91 Manual

Intermec

Intermec PB51 Manual de usuario

Intermec

Intermec EasyCoder 4420 Manual de usuario

Intermec

Intermec EasyCoder PD41 Actualización de firmware

Intermec

Intermec EasyCoder 601XP Manual de usuario

Intermec

Intermec PC23 Manual de usuario

Intermec

Intermec EasyCoder C4 Manual de usuario

Intermec

Intermec EasyCoder 501 SA Manual de usuario

Intermec

Intermec EasyCoder 501 E Guía

Intermec

Intermec UVE 10 PB21 Manual de usuario

Intermec

Intermec EasyCoder PD41 Manual de usuario

Intermec

Intermec PM23c Manual de usuario

Intermec

Intermec PF8D Manual de usuario

Intermec

Intermec EasyCoder PF2i Manual

Intermec

Intermec PB50 Manual de usuario

Intermec

Intermec 3400 Manual de usuario

Intermec

Intermec 6820 Series Manual de usuario

Intermec

Intermec EasyCoder PD42 Manual de usuario

Intermec

Intermec PB40 Manual de usuario

Intermec

Intermec EasyCoder 101 Manual

Intermec

Intermec PM4I Manual de usuario

Intermec

Intermec ColorCoder 901 Manual de usuario

Intermec

Intermec EasyCoder 501S Manual de usuario

Intermec

Intermec PM4I Instrucciones de instalación

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario