Intermec 5020 Manual

Part No. 072506-001

Using TE 2000 On Your 5020 Data Collection PC

™

These instructions explain how to install and start the TE 2000 terminal emulation

software on your 5020. For help with installing a compact flash card or a main battery

pack, or to learn about booting the 5020, see the 5020 Data Collection PC User’s

Manual (Part No. 068975).

Note: If you have any user files on your 5020, back up all your files to a desktop PC,

network drive, or non-volatile memory card. All files in RAM will be lost during the

TE 2000 installation process.

To install TE 2000 software and choose a terminal emulation mode

1. Install the TE 2000 compact flash card from the TE 2000 Upgrade Kit (Part No.

072409) in the compact flash card slot on your 5020.

If you purchased a 5020 with the TE 2000 option, the TE 2000 compact flash card

has already been installed. Continue with Step 2.

2. Install a charged main battery pack in the 5020 and close the battery compartment

door.

• If this is not the first time you have installed a charged main battery pack,

continue with Step 3.

• If this is the first time you have installed a charged main battery pack, the 5020

initializes and a message box appears. Continue with Step 4.

3. Cold boot the 5020. After the cold boot is complete, a message box appears.

4. Press

. The 5020 will warm boot and auto-load the TE 2000 application. When

the warm boot is complete, TE 2000 will start automatically. After TE 2000

initializes, the main screen appears.

TE 2000 uses IBM 3270 terminal emulation as the default. You are ready to use TE

2000 in 3270 TE mode.

To choose 5250 or VT/ANSI TE mode, continue with the next step.

5. If one of the modifier keys (





, or



) is locked, press it down for two

seconds to unlock it. The key icon should disappear from the Notification Tray.

6. Press





. The Main Menu appears.

7. Press



. The Enter Password dialog box appears.

8. Enter CR52401. The Set-Up Parms menu appears.

9. Press



. The Protocol Opts menu appears.

Using TE 2000 On Your 5020 Data Collection PC

*072506-001*

6001 36th Avenue West

Everett, WA 98203-9280

10. Press



. The Data Stream menu appears.

11. Press



to choose 5250 TE or press



to choose VT/ANSI TE.

12. Press

three times to go back to the Main Menu and then press



. The Save

Parms message appears.

13. Enter Y to save the change. The Enter Password dialog box appears.

14. Enter CR52401. The TE 2000 main screen appears and the new TE choice appears

under Host.

You are ready to use TE 2000 in 5250 TE or VT/ANSI TE mode.

Note: After you install TE 2000 on your 5020, the scanner functions only when

TE 2000 is running and is unavailable for other applications or for scanning

configuration bar codes.

To exit the TE 2000 application

1. Press





. The Main Menu appears.

2. Press



. The Enter Password dialog box appears.

3. Enter CR52401. The Set-Up Parms menu appears.

4. Press



. The Cold Start message appears.

5. Enter Y. TE 2000 closes and the 5020 desktop appears.

To restart the TE 2000 application

1. Press

to turn on the 5020.

2. Press





. The Start menu appears.

3. Press

to select Programs and then press

. The Programs drop-down menu

appears.

4. Press

to choose TE 2000 and then press

. After TE 2000 initializes, the

main screen appears.

Note: TE 2000 will also auto-start whenever you warm boot the 5020.

For more information, see the appropriate TE 2000 manual:

•TE 2000 5250 Terminal Emulation Programmer's Guide (Part No. 977-055-004)

•TE 2000 3270 Terminal Emulation Programmer's Guide (Part No. 977-055-003)

•TE 2000 VT/ANSI Terminal Emulation Programmer's Guide

(Part No. 977-055-005)

Otros manuales para 5020

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de PDA de Intermec

Intermec

Intermec 700 Series 730B Manual de usuario

Intermec

Intermec Trakker Antares 2480 Manual de usuario

Intermec

Intermec Trakker Antares 2410 Guía del usuario

Intermec

Intermec CK30 Manual de usuario

Intermec

Intermec NORAND 6642 Manual de uso y cuidado

Intermec

Intermec PEN*KEY 6400 Manual de usuario

Intermec

Intermec 5055 Manual de uso y cuidado

Intermec

Intermec Trakker Antares 2455 Manual de usuario

Intermec

Intermec Trakker Antares 2460 Manual de usuario

Intermec

Intermec CK71 Manual de usuario

Intermec

Intermec 5020 Manual de usuario

Intermec

Intermec 760 Manual de usuario

Intermec

Intermec 4500 Manual de usuario

Intermec

Intermec CN70e RFID Manual de usuario

Intermec

Intermec CN51 Manual de usuario

Intermec

Intermec 6640 Manual de uso y cuidado

Intermec

Intermec 5020 Manual de usuario

Intermec

Intermec M90 Series Manual de usuario

Intermec

Intermec JANUS JG2010 Manual de usuario

Intermec

Intermec CK3a1 Manual de usuario

Intermec

Intermec 6640 Manual de programación

Intermec

Intermec 6110 Manual de usuario

Intermec

Intermec NORAND 6642 Manual de usuario

Intermec

Intermec CV30 Manual de usuario

Manuales populares de PDA de otras marcas

SPOT

SPOT SPOT Manual de usuario

Palm

Palm handheld Manual de usuario

Winmate

Winmate E500QK Manual de usuario

Getac

Getac PS236 Manual de usuario

Sharp

Sharp CE-1600P Manual de usuario

HTC

HTC PHAR100 Manual de usuario

Mindeo

Mindeo M40 Manual de usuario

Acer

Acer n30 Manual de usuario

ASCOM

ASCOM 9D24 EX Manual de usuario

Unitech

Unitech PA520BTNF Manual de usuario

HandHeld

HandHeld Nautiz X3 Manual de usuario

Casio

Casio PALM Manual de usuario

Sharp

Sharp TM-20 Guía de inicio rápido

Atid

Atid AT870 Manual de usuario

AML

AML M7225 Manual de usuario

Audiovox

Audiovox Maestro Manual técnico

Casio

Casio PV-750 Plus Manual de instrucciones y seguridad

Unitech

Unitech PT630 Manual de usuario