Intermec 700 Series 700 Manual de usuario
Instructions
P/N 962-054-044
Revision B
August 2006
700 Mobile Computer Scanner Handle
*962054044B*
P/N 962054044B
Assembly Diagram
The 714-502-004 Kit includes:
"Scanner Handle
"Two #6--32 custom handle-to-computer retaining screws
Insert 700 Mobile Computer in Scanner Handle by
sliding in as shown by the pointer arrow.
1
2
Turn the Scanner Handle assembly over to insert
the two Mobile Computer retaining screws.
Retaining screws (one on each side)
The Scanner Handle Assembly provides access to the
connectors on the bottom of the Mobile Computer.
3If using a handle strap attached to the Scanner Handle,
install an eye-hook type that snaps over the pin on the
Scanner Handle.
Handle strap pin
If using the retaining screws, it’s recommended to
unhook the hand strap from the back of the Mobile
Computer. This allows access to the battery pack
without removing the computer from Scanner
Handle.
Otros manuales para 700 Series 700
6
Este manual sirve para los siguientes modelos
6
Tabla de contenidos
Otros manuales de Accesorios de computadora de Intermec
Intermec
Intermec DSim Manual de usuario
Intermec
Intermec Trakker Antares 2410 Manual
Intermec
Intermec 600 Series 600 Manual de usuario
Intermec
Intermec CK70 RFID Guía de configuración rápida
Intermec
Intermec FlexDock DX1 Manual de usuario
Intermec
Intermec 751 Manual
Intermec
Intermec 700 Series 700 Manual de usuario
Intermec
Intermec 700 Series 700 Manual de usuario
