USING TWO (2) TWIN BEDS AS A KING SIZE BED
hen
ut to
ether to form a kin
size bed, a
a
will exist between the two
2
twin beds. After bed have been
assembled, confirm the area between the two (2) twin beds is clear.
Otherwise, individuals may become entangled
between the two (2) twin beds, possibly causing injury and/or damage.
APPROVED BED FRAMES
The unique design of the InterFlex adjustable bed enables the adjustable foundation to be used in conjunction
ith
certain standard bed frames. The InterFlex adjustable weighs more than a traditional mattress and box spring; thus, onl
certain bed frames will work to support the weight of the product.
The manufacturer cautions against use of any
unapproved bed frames along with the Lifestyle adjustable bed.
he followin
bed frames are a
roved:
Bed Frame Used without a Headboard/Footboard (see Figure 3)
Knickerbocker Bed Frame: Style #xxx-xxxxx
Bed Frame Used with a Headboard/Footboard – Frames with Center Support (see Figure 4)
Knickerbocker Bed Frame: Style #xxx-xxxxx
Mantua
Leggett & Platt
Use of an unapproved Bed Frame or Bed Bridge with the InterFlex ad
ustable bed will void the
roduct warrant
for the
InterFlex adjustable bed and is likely to significantl
increase the risk of dama
e to the ad
ustable bed, dama
e to the bed
frame and damage to other property and is likely to significantly increase the risk of personal injury. IN ADDITION TO
ANY OTHER DISCLAIMERS WITH RESPECT TO THE INTERFLEX ADJUSTABLE BED, THE
MANUFACTURER HEREBY DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR, AND SHALL HAVE
NO LIABILITY OR OBLIGATION TO THE END USER WITH RESPECT TO ANY ABUSE, IMPROPER USE,
ACCIDENT, OR MODIFICATION OF THE INTERFLEX ADJUSTABLE BED, FOR ANY FAILURE OF T
END USER TO FOLLOW THE OPERATING OR MAINTENANCE PROCEDURES OUTLINED HEREIN,
FOR ANY IMPROPER PLACEMENT OR INSTALLATION OF THE INTERFLEX AD
USTABLE BED ON AN
APPROVED BED FRAME OR FOR ANY USE OF THE INTERFLEX
ADJUSTABLE BED TOGETHER WITH
AN UNAPPROVED BE
D FRAME. THE MANUFACTURER FURTHER DISCLAIMS ANY RESPONSIBILITY
OR LIABILITY FOR ANY DEFECTS IN THE MANUFACTURING, DESIGN, OR WORKMANSHIP OF ANY
BED FRAME, WHETHER APPROVED OR UNAPPROVED, AND THE END USER SHOULD UNDERSTAND
THAT THE END USER MUST LOOK TO THE SELLER AND/OR MANUFACTURER OF THE BED FRAME
FOR ANY CLAIMS ARISING FROM ANY FAILURE OF OR DEFECT IN ANY BED FRAME, WHETHER
APPROVED OR UNAPPROVED.
Figure 3.
