Intenso P2600 Manual de usuario

Page 1of 8 EN

User Manual

POWERBANK P2600

Page 2of 8 EN

About this manual

Read this manual carefully and observe, read and follow all instructions

mentioned in this to ensure the long life and reliable use of the device.

Please keep this manual handy for future reference and pass it on to other

users of the device.

Intended use

This Powerbank is meant solely for the purpose of power supply to devices

with an operating voltage of 5V DC (mobile phones, MP3 player etc.). Any

other use is considered as unintended use and may lead to damages and

injuries. Claims of any type resulting from unintended use are ruled out.

To avoid dysfunctions do not connect the USB starting compound of the

device with the USB connections of computers of other devices. They are

only designed to charge devices.

Do not dissemble the device into its single parts and do not try to repair it. It

does not contain user serviceable parts and in this case the warranty

becomes void.

Do not enter objects which are not designed for use into the openings of the

product. There is a danger of short circuit.

Do not handle this device with wet hands.

Do not use water or chemical solutions to clean the device. Only use a dry

cloth.

It is normal that the device produces heat while used. Do not cover the

product while used.

Do not use the device if there is visible damage or in case it is wet.

Safety Instructions:

Operating conditions:

Operate the device at 0 to 40 degree Celsius at max.

90% relative humidity. If you do not use Powerbank for

long periods of time, store the device at a temperature

range of -10 to 45 degree Celsius at max. 90% relative

humidity (for short period) and charge the device every

three months to maintain the total performance of the

device.

Page 3of 8 EN

Do not use the device in extremely cold, hot, humid or

dusty areas; also do not expose to direct sunlight. Avoid

contact with open flame. Risk of Explosion!

Shock, drop:

Please protect the device against shock and drops in all

operating modes.

Electrostatic discharge:

This device is sensitive to electrostatic discharge. Please

protect the device against any possible electrostatic

discharge.

Disposal of old batteries

The devices marked with this symbol are subject to the

European Directive 2006/66/EG. All the old batteries

must be disposed separated from household garbage

through the government agencies designated for that

purpose.

By disposing the batteries in this prescribed manner,

you can avoid environmental damages.

Disposal of Used Electronic Equipment

Equipment marked with this symbol is subject to the

European Directive 2012/19/EG.

All electrical devices and used electrical equipment

must be disposed of separately from household waste

over the appropriate government agencies.

Proper disposal of old electronic equipment helps avoid

environmental damage.

Page 4of 8 EN

Scope of delivery

Intenso Powerbank P2600

Micro USB - Charging cable

Operating instructions

Technical data

Dimensions:

95 x 25 x 25 mm

Max power consumption (Input):

5 V 1 A

Max charging current output

(Output):

5 V 1 A

Internal Battery:

2.600 mAh / 3.6 V lithium-ion

battery

Status display:

4 LED lights

Built-in overcharge/discharge

protection

Yes

Standby time:

Up to 3 months

Device Overview

1 USB OUT

2 Function key

3 Status LEDs

4 Micro USB IN

Page 5of 8 EN

Operation

1. Function keys

By briefly pressing, the LED lights will indicate the current battery status

and the Powerbank is activated.

If no device is connected to the Powerbank, or the connected device is

fully charged, the Powerbank automatically switches to standby mode

after a time interval of 5 seconds.

2. Status display LED

The individual LEDs indicate the remaining energy of the Powerbank:

LED light

% - Energy

LED 1

LED 2

LED 3

LED 4

1 % - 25 %

●

○

26 % - 50 %

●

○

51 % - 75 %

●

○

76 % - 100%

●

3. Starting-Up / Powerbank Charge / Charging

Connected Devices

a) Charging the Powerbank

Please connect the included Micro USB cable to the micro USB port of the

Powerbank, and connect the other end of the USB cable to a standard USB

port of a computer or USB power adapter. The charging process and current

charging status is indicated by the LED status lights. If the Powerbank is fully

charged, the LED status lights remain illuminated. The required charging

time of the Powerbank depends on the selected charging source and the

output power (max. 5 V / 1 A).

Page 6of 8 EN

b) Charging devices through the Powerbank

Please connect the included USB cable to the USB A port on the

Powerbank and the other end of the USB cable to the micro USB port of

the device to be charged. Press the function button to start the charging

process.

Of course, you can also use your own USB charging cable to connect the

Powerbank with your device. Please note, however, that devices can be

charged only through the USB A port of the Powerbank.

If a device is charged with the Powerbank and the Powerbank has almost

reached its capacity limits, this is signalled by flashing of the last status

LED. Please charge the Powerbank again.

Please note that, when charging a device with a Powerbank nearly 30% of

total capacity is consumed by the charging process alone. This is caused

for example by the loss of power from circuit heat and voltage

conversion.

For optimal performance, the Powerbank must be used regularly. If this is

not the case, fully charge the Powerbank at least every three months.

Page 7of 8 EN

Limited warranty conditions

The warranty only covers the replacement of this Intenso product. The

warranty is not applicable for normal wear & tear resulting from

erroneous, improper use of the device, negligence, accident or

incompatibility.

There are no warranty claims if the Intenso user manual is not

followed and if the device is damaged through improper use or defects

caused by other devices.

We are not liable for damage or data loss (of the device to be charged)

caused by dysfunction, wrong handling, repairs or battery change

made by you.

There are no warranty claims if the product is exposed to shocks,

electrostatic discharges, heat or humidity effects beyond the product

specifications.

Intenso is not liable for any collateral damages or consequential

losses, for violation of warranty conditions or any other losses

irrespective of the cause.

Important note:

Please note that any warranty claim shall expire if the housing of the

Powerbank has been opened.

This product is not meant for a commercial use or for medical and

special applications, where the failure of the product may cause

injuries, death or significant material damages.

Page 8of 8 EN

Intenso Warranty conditions

Dear Intenso customer,

Thank you for opting for a high-quality Intenso product. All Intenso products are

subject to constant quality inspections and the legal warranty period applies, of

course, from the date of purchase. Please be sure therefore to save the sales

receipt as proof of purchase.

Warranty conditions

The warranty only covers material and production defects. Intenso GmbH is not

liable for the loss of data in units sent to us. The free of charge warranty service

covers the repair or replacement of defective parts. Please understand that we

cannot render any warranty services, e.g. in case of:

Misuse or improper handling, installation or use

Damages, scratches or wear

Modifications, manipulation or repairs by third parties

Damages through force majeure or transport

Your Intenso GmbH

CLAIM PROCEDURE

In case of a claim, please proceed as follows:

1. Only returns accompanied with all accessories and sales receipt are

accepted.

2. In addition, a RMA number is absolutely required for return

shipments. You can request this RMA number via e-mail or through

the service hotline.

3. Please package the product including all accessories and the sales

receipt safe for transport. Please stamp the package.

4. Please affix the RMA number clearly visible on the outside of the

package.

Please send to the following service address:

INTENSO GMBH Service Hotline: +49 (0) 900 –

1 50 40 30

Service Center (your RMA-No.) (0.39 € / min. from the

landline in Germany.

Kopernikusstraße 12-14 Usual costs apply.)

Email: supp[email protected]

D-49377 Vechta Internet: www.intenso.de

Otros manuales para P2600

Tabla de contenidos

Otros manuales de Accesorios de Intenso

Intenso

Intenso XC10000 Manual de usuario

Intenso

Intenso P10000 Manual de usuario

Intenso

Intenso WPD10000 Manual de usuario

Intenso

Intenso HC20000 Manual de usuario

Intenso

Intenso POWERBANK A5200 Manual de usuario

Intenso

Intenso XS20000 Manual de usuario

Intenso

Intenso XS10000 Manual de usuario

Intenso

Intenso P5200 Manual de usuario

Intenso

Intenso Q10000 Manual de usuario

Intenso

Intenso XC10000 Manual de usuario

Intenso

Intenso XS10000 Manual de usuario

Intenso

Intenso PD20000 Manual de usuario

Intenso

Intenso PD20000 Manual de usuario

Intenso

Intenso XS20000 Manual de usuario

Intenso

Intenso XS5000 Manual de usuario

Intenso

Intenso POWERBANK HC15000 Manual de usuario

Intenso

Intenso POWERBANK S2500 Manual de usuario

Intenso

Intenso POWERBANK HC15000 Manual de usuario

Intenso

Intenso A10000 Manual de usuario

Intenso

Intenso POWERBANK A5200 Manual de usuario

Intenso

Intenso S10000 Manual de usuario

Intenso

Intenso P2600 Manual de usuario

Intenso

Intenso PD10000 Manual de usuario

Intenso

Intenso POWERBANK S5000 Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario