IntelliScanner IS90 Manual de usuario

LEGAL NOTICE

Other trademarks are the property of their respective owners – no endorsements by third-party

trademark holders are implied. Product includes parts and accessories which may represent a choking

hazard to small children. Revision 2012-08. http://www.intelliscanner.com.

FCC WARNING STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CANADIAN DOC STATEMENT

This digital apparatus does not exceed the Class B limits for radio noise for digital apparatus set out in the

Radio Interference Regulations of the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux

appareils numériques de las classe B prescrites dans le Réglement sur le brouillage radioélectrique édicté

par les ministère des Communications du Canada.

CE MARKING AND EUROPEAN UNION COMPLIANCE

Testing for compliance to CE requirements was performed by an independent laboratory. The unit under

test was found compliant with all the applicable Directives, 2004/108/EC and 2006/95/EC.

ROHS STATEMENT OF COMPLIANCE

This product is compliant to Directive 2002/95/EC.

NON-MODIFICATION STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

HI, I’M INTELLISCANNER!

LED Indicator

Mini USB port

Scanning

Aperture

Button

(w/ protective cover)

IntelliScanner Scanabout is a Bluetooth® wireless barcode scanner

you can use with your Mac, PC, iPhone, or iPad.

Introduction.............................................................................4

Beeps and LED Guide................................................................6

Setup........................................................................................8

Numeric Entry..........................................................................12

General Controls.......................................................................15

Timeout/Reading Mode...........................................................16

Keyboard Layout......................................................................18

Symbologies............................................................................22

UPC/EAN/ISBN Advanced Controls...........................................26

WHAT’S IN THE BOX?

CHARGING

IntelliScanner

Mini USB

Your Computer’s

USB Port

Charge your IntelliScanner with the included cable. Connect one

end to the mini USB port (under the flap), and the other end to

your computer. The red light turns off when fully charged.

IntelliScanner Scanabout Quick Start Guide

USB Charging Cable Wrist Strap

HOW TO SCAN

Press and hold down the button for a second to turn on

IntelliScanner – you’ll hear a beep when the scanner turns on.

To scan a barcode, hold the button down while aiming from a short

distance. Be sure the red scanning beam fully crosses the barcode.

For most barcodes, a distance of 1 to 5 inches (2.5 - 12.5 cm) works

best. You may need to back up a bit for particularly wide barcodes.

BLUETOOTH® PAIRING

IntelliScanner can be paired with any Bluetooth® wireless equipped

device that supports wireless keyboards. When paired and

connected, scans are immediately sent via keyboard emulation to

the current app. Follow the steps on the pages ahead to pair with

your device.

BEEPS

Single Long Beep

Single Beep

Two beeps

Three beeps

Three short beeps

Five beeps

Power up

Scanned successfully

Bluetooth® connection established

No Bluetooth® connection

Scanned successfully, no device connected

Low power

LED INDICATORS

Off

Flashing Green

Green for 2 sec

Flashing Red

Solid Red

Standby or Off

Disconnected or Discoverable

Scanned Successfully

Low power

Charging

INCLUDED SOFTWARE

IntelliScanner includes software for your Mac or PC for organizing

and managing inventory, media, and assets. You can use the

included apps, or use your own software like FileMaker, Excel,

Numbers, LightSpeed, and many more. IntelliScanner types

barcode values as if entered on the keyboard, so it’ll work with

most third-party software.

If you want to use the included IntelliScanner apps on your

computer, you’ll find the activation codes and download link

attached to the inside of your scanner’s box.

TROUBLESHOOTING & MAINTENANCE

IntelliScanner won’t turn on: Press and hold the button for a

second until you hear a beep. If it still won’t turn on, try charging it.

IntelliScanner won’t scan: IntelliScanner needs a wireless

connection to a device to send its scans. If you hear a warning,

be sure you’ve connected your scanner before you scan, or try

re-pairing the device.

Cleaning: Use a soft cloth to clean your scanner. Never use alcohol

or an abrasive substance.

IOS DEVICE SETUP

To connect to an iPhone or iPad, follow these steps:

Step 1: Scan the following two barcodes, in order:

. E043$

ENABLE

PAIRING

*.E043$*

DISCONNECT

. E031$

*.E031$*

Step 2:

On your iOS device, open Settings app > General > Bluetooth.

Ensure Bluetooth is on, then select“IntelliScanner”from the list.

Step 3:

You’ll be asked to enter a PIN to authenticate your connection.

“Type”the pincode displayed by your iOS device by following the

steps on the Pincode Setup page (Page 11).

Step 4:

Enable keyboard triggering mode, if desired. When a keyboard

like IntelliScanner is connected, your iOS device automatically hides

the on-screen keyboard. To allow access to the on-screen keyboard,

scan Enable Keyboard Triggering below.

Once Keyboard Triggering is enabled, you can“double click”the

button on your IntelliScanner to toggle the on-screen keyboard.

Step 3 (cont):

From this point forward, your two devices are paired – that is,

when you turn on your IntelliScanner within range of your device,

they’ll automatically connect and you can immediately start

scanning. You can also prompt a manual connection by tapping the

scanner on your iOS device.

MAC/PC SETUP

To connect to a Mac, PC, or Bluetooth® device, follow these steps:

Step 1: Scan the following two barcodes, in order:

. E043$

ENABLE

PAIRING

*.E043$*

DISCONNECT

. E031$

*.E031$*

Step 2:

On your computer, choose the option set up a new Bluetooth

device from the Bluetooth preferences.You’ll see“IntelliScanner”

on the list of discovered devices – it’ll be recognized as keyboard.

Step 3:

You’ll be asked to enter a PIN.“Type”the pincode displayed by

your computer by following the steps on the next page, and you’re

done. If you’re pairing with a Mac, you may be prompted to identify

your keyboard after pairing. Skip this and just close the window.

Once completed, your two devices are paired – that is, when

you turn on your IntelliScanner, it’ll automatically connect.You can

can also prompt a manual connection on your computer.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario