Intelitek ER-400 Manual de usuario

Wireless Internet Camera for ER-400

Installation Guide

Catalog #100499 - Rev. C

November 2009

Wireless Internet Camera for ER-400

Installation Guide

Catalog #100499 C

November 2009

Every effort has been made to make this book as complete and accurate as possible. However, no

warranty of suitability, purpose, or fitness is made or implied. Intelitek is not liable or responsible to any

person or entity for loss or damage in connection with or stemming from the use of the software,

hardware and/or the information contained in this publication.

Intelitek bears no responsibility for errors that may appear in this publication and retains the right to make

changes to the software, hardware and manual without prior notice.

INTELITEK INC.

444 East Industrial Park Drive

Manchester NH 03109-5317

Tel: (603) 625-8600

Fax: (603) 625-2137

Web site: www.intelitek.com

Table of Contents

Chapter 1: Getting Started 1

Unpacking the Equipment .......................................................................................1

System Requirements ..............................................................................................1

Camera Kit Components..........................................................................................1

Installing the ViewFlex System...............................................................................2

Chapter 2: Mounting the Camera 3

12V Power Supply Convertor..................................................................................3

Attachment of Camera Mounting Shelf...................................................................4

Mount Camera.........................................................................................................5

Option A: Bottom Mount.............................................................................5

Option B: Top Mount ..................................................................................6

Power Connection....................................................................................................6

Chapter 3: Connecting the Software Protection Key 7

Chapter 4: Installing the ViewFlex Software 9

Chapter 5: Data Connection for Setup 13

Option A: LAN Router..............................................................................13

Option B: Crossover Ethernet Cable .........................................................13

Chapter 6: Installing the Internet Camera Software 15

Chapter 7: Software Configuration 21

Chapter 8: ViewFlex for D-Link Camera Interface 23

Chapter 9: Demo Program 25

Description.............................................................................................................25

System Requirements ............................................................................................25

Software Requirements..........................................................................................25

System Configuration............................................................................................26

Software Setup.......................................................................................................26

AGV Laptop Configuration.......................................................................26

Desktop PC Configuration.........................................................................26

Instructions ............................................................................................................27

Wireless Internet Camera for ER-400

Installation Guide 1 Getting Started

(0911)

Getting Started

Unpacking the Equipment

Before installing the equipment, check for signs of shipping damage. If any

damage is evident, contact your freight carrier, and begin appropriate claims

procedures. Make sure you have received all the items listed on the packing list. If

anything is missing, contact your supplier.

System Requirements

Pentium 4 Dual Core with 3 GHz processor or higher, with CD drive

At least 512 MB RAM (1 GB for Vista)

A hard drive with at least 100 MB of free disk space

One of the following Windows 32 or 64 bit operating systems:

Windows XP Professional

Windows Vista (Home Premium/Business/Ultimate editions)

Windows 7 (Home Premium/Professional/Enterprise/Ultimate editions)

A VGA or better graphics display, minimum 256 colors

A Mouse or other pointing device

USB port

Camera Kit Components

Part no. Qty Description

110329 1 Camera Mounting Shelf

110330 1 Camera Anchor Bracket

035088 1 Power Supply (included in AGV)

302218 5 M5 x 8 mm Allen head screws

312007 5 M5 T-Slot Nut Inserts

310204 2 M5 Nuts

313022 5 M5 Flat Washers

301233 3 35 mm x M5 Allen Screw

306601 1 1/4" x 3/8" Allen Screw

313005 1 1/4" Flat Washer

330223 1 Allen wrench set (3 mm and 4 mm x 6 cm)

330225 1 Allen wrench (3/16" x 5")

330209 1 Allen wrench (4 mm x 14.5 cm)

Wireless Internet Camera for ER-400

Installation Guide 2 Getting Started

(0911)

Installing the ViewFlex

System

Install the ViewFlex system in the following order:

Mounting the Camera, page 3

Connecting the Software Protection Key, page 7

Installing the ViewFlex Software, page 9

Connecting the Internet Camera to your Computer, page 13

Installing the Internet Camera Software, page 15

Software Configuration, page 21

Wireless Internet Camera for ER-400

Installation Guide 3 Mounting the Camera

(0911)

Mounting the Camera

Mounting the camera involves the following steps:

Attachment of camera mounting shelf

Mounting of camera

Connecting power cable

12V Power Supply

Convertor

The power supply converts the 24-volt electricity from the AGV's batteries to the

12 volts required for operation of the camera.

24V Power Supply

Camera Cable

Wireless Internet Camera for ER-400

Installation Guide 4 Mounting the Camera

(0911)

Attachment of Camera

Mounting Shelf

1. Install the Camera Mounting Shelf as follows:

a. Position the Camera Mounting Shelf on top of the Upper Service Stand

Shelf Supports. Note that four of the holes on the bottom side of the

Camera Mounting Shelf are beveled. The top side of the shelf does not

have any beveled holes. If you have a large laptop computer positioned on

the Lower Service Stand Shelf, then you must use the pair of holes which

are 2.5 cm from the edge of the Camera Mounting Shelf so that the laptop

computer may be opened fully. If you have a smaller laptop or notebook

computer, then you may use the pair of holes which is 4.6 cm from the edge

of the Camera Mounting Shelf.

b. Insert two T-slot nuts (part # 312007) into the profile slot.

c. Insert two 3mm Allen screws and tighten with a 3-mm Allen wrench.

Profile

Slot

Otros manuales para ER-400

Tabla de contenidos

Otros manuales de Cámara IP de Intelitek

Intelitek

Intelitek ER-400 Manual de usuario

Manuales populares de Cámara IP de otras marcas

FLIR

FLIR Exx series Manual de usuario

Avigilon

Avigilon H4A-BO1-IR Manual de usuario

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manual de usuario

ShareTech

ShareTech AV1 Manual de usuario

Ezviz

Ezviz C6C Manual de usuario

Melchioni

Melchioni UCAM 2015 Manual de usuario

Geutebruck

Geutebruck G-Cam/ESD-4630 Manual de usuario

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manual de usuario

Mitel

Mitel 6800i Series Manual de servicio

Vitek

Vitek VTC-IR403-212NP Manual de usuario

THOMSON

THOMSON DSC - 323W Manual de usuario

AVer

AVer FB2027 Manual de usuario

ENFORCER

ENFORCER EV-T5105-N2SQ Manual de usuario

Wansview

Wansview NC543 Manual de usuario

Eneo

Eneo MCB-64A0003M0A Manual de usuario

deView electronics

deView electronics CBDNI36F Manual de usuario

Swann

Swann SwannEye Manual de usuario

LevelOne

LevelOne IP CamSecure Manual de usuario