7. Homologation
05326-18-00160
This equipment is not entitled to
protection against harmful interfe-
rence and may not cause interfe-
rence to duly authorized systems.
5. Handling
Each registered control will be as-
sociated to the user, according to
the registration sequence, and the
rst registered control (address
00) will have the same permis-
sions as the user of password
00 (Master User), and the other
controls assuming the addresses
01 to 97 (necessary to register/
enable passwords and permis-
sions for these users). The system
activation and deactivation keys
of the controls come enabled
from the factory for the user de-
ned (permission required), and to
change these and enable the third
key, refer to the complete manual
of the AMT 8000 alarm center.
6. Battery
Use only quality batteries with the
correct sizing for the device, and
with the typical use of the device,
the battery life forecast is 3 to 5
years and can be inuenced by the
number of triggering, weather con-
ditions and conguration mode.
The battery model should be
CR2032, being used one (1) battery
per control.
Battery model CR2032
The indication of the low battery level
of controls will be demonstrated on
the keyboard displays and/or in appli-
cations with respective events.
To change the batteries of the XAC
8000 control, it must be opened, star-
ting at the back of the control (near
the opening for keyring allocation).
Remove the used battery and add the
new one, checking the correct position
and close the control cabinet again.
Note: programming and registra-
tion between control and center unit
will not be lost when the batteries
are removed or the center unit in
which it is paired is turned off.
Warranty term
It is expressly stated that this contractual
warranty is given subject to the following
conditions:
Name of customer:
Signature of the customer:
No. of the invoice:
Date of purchase:
Model: Serial No:
Reseller:
1. All parts and components of the product
are under warranty against possible ma-
nufacturing defects, which may present,
for a period of one (1) year, – comprising
90 (ninety) days of legal warranty and 9
(nine) months of contractual warranty, –,
counted from the date of purchase of the
product by the Consumer, as stated in the
invoice of purchase of the product, which
is part of this Term throughout the natio-
nal territory. This contractual warranty in-
cludes the express exchange of products
that are defective in manufacture. In case
no manufacturing defect is found, but
aw(s) from inappropriate use, the Con-
sumer will bear these expenses.
2. Product installation must be done in ac-
cordance with the Product Manual and/
or Installation Guide. If your product
needs to be installed and congured by
a qualied technician, look for a suita-
ble and specialized professional, and the
costs of these services are not included
in the value of the product.
3. If the defect is found, the Consumer
should immediately communicate with
the nearest Authorized Service listed by
the manufacturer, – only they are autho-
rized to examine and remedy the defect
during the warranty period provided he-
rein. If this is not respected, this guaran-
tee will lose its validity, as the violation
of the product will be characterized.
4. In the event that the Customer request
home care, he/she should refer to the
nearest Authorized Service for the tech-
nical visit fee. If the need for withdrawal
of the product is found, the expenses
arising, such as transportation and sa-
fety to and from the product, are under
the responsibility of the Consumer.
5. The warranty will totally lose its validity
in the event of any of the following: a)
if the defect is not of manufacture, but
caused by the Consumer or by third par-
ties alien to the manufacturer; b) if the
damage to the product comes from ac-
cidents, claims, agents of nature (light-
ning, oods, landslides, etc.. ), humidity,
mains voltage (overvoltage caused by
accidents or excessive mains uctua-
tions), installation/use in disagreement
with the user manual or due to natural
wear of parts and components; c) if the
product has been inuenced by chemi-
cal, electromagnetic, electrical or animal
(insects, etc.); d) if the product’s serial
number has been tampered with or era-
sed; e) if the device has been violated.
6. This warranty does not cover loss of
data, so it is recommended that the
Consumer make a regular backup of the
data on the product.
7. Intelbras is not responsible for the ins-
tallation of this product and also for any
attempts of fraud and/or sabotage on its
products. Keep software and application
updates, if any, up to date, as well as ne-
twork protections necessary to protect
against hackers. The equipment is gua-
ranteed against aws within its normal
conditions of use, and it is important to
be aware that, since it is an electronic
equipment, it is not free from frauds and
scams that may interfere with its correct
functioning.
Since these are the conditions of this com-
plementary Warranty Term, Intelbras S/A
reserves the right to change the general,
technical and aesthetic characteristics of its
products without prior notice.
The manufacturing process for this product
is not covered by the requirements of ISO
14001.
All images in this manual are illustrative.
01.20
Made in Brazil
Customer Support: (48) 2106 0006
Forum: forum.intelbras.com.br
Support via chat: intelbras.com.br/
suporte-tecnico
Support via e-mail: suporte@
intelbras.com.br
Customer Service: 0800 7042767
Where to buy? Who installs it?
0800 7245115
Produced by: Intelbras S/A – Indústria de Telecomuni-
cação Eletrônica Brasileira – Rodovia BR 459, km 124,
nº 1325 Distrito Industrial Santa Rita do Sapucaí/MG
– 37540-000 – CNPJ 82.901.000/0016-03
www.intelbras.com.br
