INSTEON 2843-222 Manual de usuario
INSTEON Open/Close Sensor
2843-222
Quick Start Guide
INSTEON Open/Close Sensor
Magnet
Set Button
(Cover Removed)
Status LED
AA Battery
(Included)
Set Button
Sensor Placement
1Peel o the tape backing and mount the
sensor and magnet to a window or door.
2Position the sensor so that the arrows
on the magnet and sensor enclosure
align and are no more than ½” apart.
1 2
Up to ½”
1Follow the on-screen instructions to
add your Open/Close Sensor to the
INSTEON Hub.
Linking to the Hub
+
If not using the Hub, refer to the
instructions that came with your product.
!
2When prompted, press and hold the
Open/Close Sensor’s set button until the
status LED begins blinking.
NEW
X
Tap the set button. The status LED
will double-blink.
Congure Alerts
To receive email and text message alerts when
motion is detected, switch on alerts from
device settings within the INSTEON app.
!
RAW-1298 Rev 03.13.14
Protected under U.S. and foreign patents (see www.insteon.com/patents)
©2014 INSTEON
MANUAL
Learn More
For the complete Owner’s Manual, video
tutorials, product support and more, visit:
insteon.com/support
Otros manuales para 2843-222
1
Tabla de contenidos
Otros manuales de Sensor de seguridad de INSTEON
