Insta360 CINSAAVG Manual de usuario
GPS Preview Remote
GPS 图传遥控器
Instructions for Use / 使用说明
EN · CN · DE · ES · FR · IT · JA · KO · TC
Instructions for Use ................................1
使用说明 ..................................................8
Gebrauchsanleitung................................14
Instrucciones de uso ..............................22
Instructions d'utilisation .........................30
Istruzioni d'uso........................................38
取扱説明書...............................................46
사용 안내...................................................53
使用說明 ..................................................59
1
1.Overview
A B D
E
C
A. Shutter Button B. Power Button C. Touch Screen
D. Speaker E. Charging Points
Wrist Strap Universal Strap
2. Charging
Put the remote on the charging base, ensuring that the
charging points are in full contact. Then, connect the charging
base to the charger and the power supply. An indicator will
appear on the touch screen to confirm the remote is charging.
Note:
• Please use a 5V/1.5A power adapter to charge the Remote.
• Keep the remote and the charging base clean and dry.
English
2
3. Installation
3.1. Installed to a wrist
Fit the remote into the Wrist Strap. Ensure the button is in the
correct position, then wear on your wrist.
3.2. Installed to a selfie stick
Install the Remote into the Universal Strap. Ensure the button
is in the correct position when fitted. Use the remote together
with the Selfie Stick.
3.3. Installed on to a bike / motorcycle
Install the Remote into the Universal Strap. Then, fit
accordingly to the handlebar of your bike or motorcycle as
needed.
4. How to Use
4.1 Power on / off
When powered off, long press the power button to turn on the
remote.
When powered on and with the camera disconnected, long
3
press the power button to turn off the remote.
When powered on and with the camera connected, long press
the power button to select from the three options: turn off the
remote, turn off the camera, or turn off both.
4.2. Connecting and Waking up the Camera
4.2.1 Connecting the camera
1. Long press the power button to turn on the Remote.
2. Press the power button on the camera to turn it on.
3. Click "Insta360 GPS Preview Remote" on the camera's
Bluetooth Remote interface. When the camera's screen
displays Connected, it has been paired successfully.
Important:
• Be sure that your camera's firmware has been updated to the
latest official version.
• The remote can be used up to 26.2ft (8m) for effective
preview and 65.6ft (20m) for effective control in optimal
conditions.
• For support of cameras, please stay tuned for Insta360's
official website and its future firmware updates of the
remote.
• After connecting to the remote for the first time, the device
can wake up the camera within its effective range without
repeating any pairing steps.
4.2.2 Connecting and using multiple cameras
To connect with another camera, swipe down from the top of
the remote's watch dial to enter the connecting interface and
tap . The remote will be ready to pair. Enter the Bluetooth
Remote feature on your camera and connect to the remote.
To connect with more cameras, repeat the process.
Notes:
• The remote can control up to 4 cameras at a time. Note that
the camera recognizes only one remote at a time.
• When connected with multiple cameras, the Remote will only
show the quantity of the connected cameras and won't display
other states.
4
4.2.3 Wake up a Camera
Use the remote to wake up your camera. After connecting
to the camera for the first time, swipe down on the remote's
touchscreen to enter the connection interface, and choose one
of the following two ways to wake up the camera:
Connect: Wake up the last connected camera. The camera will
automatically connect to the remote once powered on.
QuickCapture: Wake up the last connected camera. The camera
will automatically connect to the remote and enter QuickCapture.
Notes:
• Ensure to activate "Bluetooth Wakeup" on the camera before
trying this feature.
• If connected with multiple cameras, the remote cannot
perform wake up on any camera.
•To use QuickCapture, make sure it is enabled on your camera.
• Press the remote's Shutter Button once to enter
QuickCapture. Long press the Shutter Button to connect to the
camera.
4.3. Control the Camera
When the camera is connected, operating on the screen of the
remote or pressing its buttons to control the camera.
4.3.1 Preview Page
When the camera is connected, the remote will display the
camera's corresponding information on the preview page.
1. Camera capacity 2. GPS signals
3. Battery level of the camera 4. Preview page
5. Shooting mode 6. Shooting specifications
1 2
6
4
5
3
5
4.3.2 Switch shooting modes
On the touchscreen: swipe left or right on preview page to
switch shooting modes.
Power button: Press the power button repeatedly to switch
shooting modes.
4.3.3 Shooting specifications
In the preview page, tap the shooting specifications button
or swipe from the bottom upwards to enter shooting
specifications page to set any preferred parameters.
4.3.4 3A Parameters
In preview page, swipe from right to left to enter the 3A
parameter page and to set further parameters.
4.3.5 Take photos or videos
In the preview page, press the shutter button on the remote to
take a photo or start recording, then press the shutter button
again to stop recording.
4.4. Application Center
4.4.1 Dashboard, Compass
Swipe left or right on the watch dial of the remote touchscreen
to enter Dashboard, Compass or Settings.
4.4.2 Settings
You will find the following in Settings: Display and Brightness,
Direction of Display, Sound, Time, Language, About and
Factory Data Reset.
5. Firmware Update
Access Insta360 App > Settings > Update, then connect to the
remote. If there is new firmware, an update note will pop up.
Please update the remote according to the instructions on the
App.
6
6. Specifications
Model: CINSAAVG
Wrist Strap Band ts 140–210mm wrists.
Diameter of Universal
Strap 2cm ~ 3.5cm
Work environment -20℃ ~ 40℃ (-4°F to 104°F)
Charging environment: 0℃ ~ 40℃ (32°F to 104°F)
Waterproof IP68 (up to 4.9ft for 0.5hours)
Battery Capacity 950mAh
Bluetooth
Protocol: 5.0
Operation Frequency:
2402~2480MHz
Output Power (E.I.R.P.) <10dBm
Safety Information
• This product contains magnets. Keep it away from
pacemakers and other devices to avoid interference.
• The product only should be used in temperatures from -4°F
to 104°F (-20°C to 40°C).
• If the product is not used for a long time (e.g. 2 months
or longer), the battery may be depleted. Please charge the
product fully, then turn it on.
• Do not drop or strike the product. Do not place heavy objects
on the product, as this will cause damage.
• Do not leave the product near heat sources such as a furnace
or heater. Do not leave the product inside of a vehicle on hot
days.
• Wipe the product dry as soon as possible after contact with
water. Do not wear it when swimming or diving.
• Do not use any liquid cleansers on the product. Do not wipe
the charging points on the remote with liquid detergent, as
these may corrode and rust, affecting the remote. Only use a
soft dry cloth to clean the product.
Tabla de contenidos
Idiomas:
