Insta360 Ace Pro Manual de usuario
Ace Pro User Manual
User Manual
Ace Pro User Manual
Content
Product Introduction 1
Ace Pro Introduction 1
Standard Accessories 2
First Use 4
Insert the Battery 4
Insert the MicroSD Card 5
External Devices 5
Charging 6
Activation 7
Basic Use 8
Button Instructions: 8
Using the Screen 10
Shooting Mode 13
Indicator Lights 20
File Storage 22
Exclusive Features 23
Gesture Control 23
Clarity Zoom 23
Cancel Recording 23
Pause Recording 24
Photo Grab 24
Ace Pro User Manual
Auto Dash 25
AI Warp 25
AI Selfie Stick Eraser 25
AI Highlights Assistant 26
app Background Downloading 26
GPS Preview Remote 27
File Transfer 33
Insta360 App 错误！未定义书签。
Connect to the Insta360 App 36
Android Mode 36
app Interface 36
Maintenance 37
Firmware Update 37
Waterproofing 38
Cleaning 39
Battery Precautions 39
Ace Pro User Manual
1
Product Introduction
Ace Pro Introduction
1. Indicator Light
2. Front Screen
3. Shutter Button
4. Microphone
5. Lens
6. Power Button
7. USB Port Cover
8. USB Type-C Port
9. MicroSD Card Slot
10. Battery Cover
11. Battery
12. Release Switch
13. Indicator Light
14. Flip Touchscreen
15. Mounting Latch
16. Speaker
Ace Pro User Manual
2
Standard Accessories
Ace Pro includes two in-the-box accessories for flexible shooting wherever you go.
Accessories
Description
Figure
Standard Mount:
Secure your camera
to any accessory for
ultra-stable shots
with the universal 2-
prong mount.
Magnetic design for
quick assembly and
disassembly.
How to Use:
1. Align the camera lens with
the icon on the Standard
Mount and attach the
mount.
2. Press the Standard Mount
against the camera until
you hear a click. Then,
gently pull away from the
camera to ensure it is
attached and properly
installed.
3. Press and hold the buttons
on both sides of the
Standard Mount at the
same time to remove the
camera.
Expanded use:
Standard Mount can realize the
connection between the camera
and the three-jaw interface
accessories, and can be
externally connected to the
Flexible Adhesive Mount and
other accessories.
Ace Pro User Manual
3
Flexible Adhesive
Mount：
Flexible design with a
strong 3M adhesive
base that can be used
on flat, curved
surfaces and in
complex
environments. Heat
and humidity
resistant.
How to Use:
1. Peel off the red sticker on the
bottom of the Flexible Adhesive
Mount and clean the base with
a cleaning wipe before use.
Stick to the surface and press
and hold for 30 seconds.
2. Attach the Standard Mount.
Tighten the screw to ensure it is
stable.
3. Attach the camera to the
Standard Mount.
Notes:
∙The adhesive base is a
one-time use only. If it detaches
from the surface, it cannot be
reused.
∙The product should be
mounted to a smooth, clean
surface, such as glass, ceramic,
plastic, painted surfaces, metal,
etc.
∙The mount can be directly
connected to a camera or used
with a carbon fiber extension
rod on a helmet. It cannot be
used with any selfie sticks.
Ace Pro User Manual
4
First Use
Insert the Battery
1. Press and hold the latch of the Battery Cover and slide it downwards.
2. When you see the yellow indication mark, open the cover outward.
3. Insert the battery in the direction indicated on the battery.
4. Close the cover and ensure the yellow indication mark is completely covered to ensure
waterproofing is not affected.
Ace Pro User Manual
5
Insert the MicroSD Card
1. Press and hold the latch of the USB Port Cover and slide it downwards.
2. Insert the MicroSD Card in the direction indicated on the card.
Note:
Please use exFAT format microSD cards of speed classes UHS-I and V30 or above to ensure
normal recording. The maximum supported storage space is 1TB.
External Devices
1. Hold the protective cover of the camera's MicroSD card slot against the protruding part of the
cover in the direction shown in the illustration, and pull out the cover completely in the direction
indicated by the arrow;
2. Open the cover outward and pull it out firmly ;
3. After pulling out the cover, you can insert the flash companion and audio adapter;
4. After use, align the inner notch on the top of the protective cover with the silver metal snap
above the slot compartment.
Ace Pro User Manual
6
Charging
Open the camera's USB Port Cover. Use the Type-C to Type-C charging cable included in the box
to connect the Type-C port of Ace Pro to a Type-C charger.
Rapid PD Fast Charging gets your camera to 80% battery in just 22 minutes and fully charges in 46
minutes.
Ace Pro Charging Time:
∙PD Fast Charging: 46 minutes - 100%
∙Normal Charging: 63 minutes - 100%
*The Indicator Lights will be solid red when charging and will turn off once the battery is fully
charged.
Ace Pro User Manual
7
Activation
You need to activate Ace Pro in the Insta360 App before using it for the first time.
Steps:
1. Download the Insta360 App. Alternatively, search "Insta360" in any major app store or scan the
QR code on the box.
2. Press the Power Button to turn on Ace Pro.
3. Enable Wi-Fi and Bluetooth on your smartphone.
4. Open the Insta360 App and click the camera at the bottom of the page. Select the device you
want to connect to in the pop-up window, then follow the on-screen instructions to complete the
connection. The name of your camera is "Ace Pro ******" by default, where ****** is the last six
digits of the serial number on the box your Ace Pro came in. The first time you connect to Ace Pro,
you will need to confirm the connection on the touchscreen.
5. After successfully connecting the camera, follow the on-screen instructions to activate your
camera. The app will prompt you to update the firmware if a new version is available. Please follow
the on-screen prompts to update the firmware of Ace Pro.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara de acción de Insta360
Insta360
Insta360 GO 3 Manual de usuario
Insta360
Insta360 GO 3 Manual de usuario
Insta360
Insta360 GO Manual de usuario
Insta360
Insta360 ONE RS Manual de usuario
Insta360
Insta360 ONE X Manual de usuario
Insta360
Insta360 GO 3 Manual de usuario
Insta360
Insta360 One Manual de usuario
Insta360
Insta360 ONE RS Manual de usuario
Insta360
Insta360 GO 3 Manual de usuario
Insta360
Insta360 ONE R Instrucciones de montaje
